BRZ Ts parts - Page 170 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

kuczynskika · 06-12-2017, 03:17 PM

Quote:

Originally Posted by SuperDave

tS in the front....wtf subaru

My complaint as well...

DSOmegaX · 06-12-2017, 03:53 PM

Quote:

Originally Posted by kuczynskika

My complaint as well...

Well it's smart on their part. US expectations of what a "STI" car doesn't match the vehicle. By avoiding putting STi badges on the car, they can claim it was never a "BRZ STI". Also my guess is that it continues to cultivate STI as a model designation for the WRX in the US.

If you're looking to do the new front end, you should wait until the actual STi badge for it comes out. My guess is since we saw the test car with the badges, there is most likely a JDM tS coming as well that has the STi badge back on.

tacos · 06-12-2017, 04:19 PM

awwww no alcantara wheel

kuczynskika · 06-12-2017, 04:32 PM

Quote:

Originally Posted by DSOmegaX

Well it's smart on their part. US expectations of what a "STI" car doesn't match the vehicle. By avoiding putting STi badges on the car, they can claim it was never a "BRZ STI". Also my guess is that it continues to cultivate STI as a model designation for the WRX in the US.

If you're looking to do the new front end, you should wait until the actual STi badge for it comes out. My guess is since we saw the test car with the badges, there is most likely a JDM tS coming as well that has the STi badge back on.

Yeah, I mean I get why they did it. Sure doesn't satisfy us purists tho haha!

Yes, I agree with you too. I foresee another JDM tS as before, with the more desirable parts.

I have actually just purchased a replacement MY2014 bumper and decided to remain with the 2015 tS. After seeing the revised front under spoiler/ bumper etc and pricing new headlights + DRLs I felt keeping with the 2015 look would be better... and a bit more special. I certainly do want to wait for the red bumper garnishes for the front and back tho. I image you'll be waiting too!

Vides990 · 06-13-2017, 10:14 AM

Quote:

Originally Posted by kuczynskika

Yeah, I mean I get why they did it. Sure doesn't satisfy us purists tho haha!

Yes, I agree with you too. I foresee another JDM tS as before, with the more desirable parts.

I have actually just purchased a replacement MY2014 bumper and decided to remain with the 2015 tS. After seeing the revised front under spoiler/ bumper etc and pricing new headlights + DRLs I felt keeping with the 2015 look would be better... and a bit more special. I certainly do want to wait for the red bumper garnishes for the front and back tho. I image you'll be waiting too!

Would you speculate on such vehicle also making it to the US, or 2018 TS being the best we probably get?

kuczynskika · 06-13-2017, 12:20 PM

Quote:

Originally Posted by Vides990

Would you speculate on such vehicle also making it to the US, or 2018 TS being the best we probably get?

In our case what you see is what you get.

Sent from my iPhone using Tapatalk

JonRZ · 06-14-2017, 04:31 PM

Just wanted to add that the JDM STI badge and setting works with the 2017 bumper as I installed it on mine but the positioning is a bit lower (under the first grille fin) as opposed to the top; and only 1 of the 2 pre-cut holes 'snap-in' which still keeps it durable with a screw. Hard to describe but it works. I believe the Michigan spotted BRZ which had the STI logos on it had that in the front grille as well.

Jfheisenberg · 06-15-2017, 12:40 PM

Quote:

Originally Posted by SkyeHack

And i was just about to trade in my series blue lmao. No recaro seats wtf

Jfheisenberg · 06-15-2017, 12:42 PM

When will subaru release the red trim ?!?!

fourdegrees · 06-15-2017, 01:28 PM

They need to stop dragging their feet releasing specifics. I'm ready to pull the trigger on a 2017 with PP but waiting on the final release specs of this car.

derekbrz24 · 06-15-2017, 09:23 PM

Quote:

Originally Posted by JonRZ

Just wanted to add that the JDM STI badge and setting works with the 2017 bumper as I installed it on mine but the positioning is a bit lower (under the first grille fin) as opposed to the top; and only 1 of the 2 pre-cut holes 'snap-in' which still keeps it durable with a screw. Hard to describe but it works. I believe the Michigan spotted BRZ which had the STI logos on it had that in the front grille as well.

where did you order the JDM badge?

Poodles · 06-16-2017, 01:39 AM

Quote:

Originally Posted by Jfheisenberg

And i was just about to trade in my series blue lmao. No recaro seats wtf

I know right? Main reason I bought the Series.Blue is because it's just that much closer to a true tS and was cheaper than be buying the body kit, under panels, etc.

Still waiting to see if there's more info on this and if it's hiding any other gems.

brz-times · 06-16-2017, 02:46 AM

no alcantara please ...
first impression is good but not good for care it

Sent from my iPhone using Tapatalk

krayzie · 06-16-2017, 05:49 AM

Quote:

Originally Posted by Poodles

I know right? Main reason I bought the Series.Blue is because it's just that much closer to a true tS and was cheaper than be buying the body kit, under panels, etc.

Still waiting to see if there's more info on this and if it's hiding any other gems.

The main reason with the Series.Blue was for looks. It's nothing close to the tS in terms of handling.

Buying the tS is really for the parts that you can't readily see from the outside (i.e. flexible v-bars, flexible draw stiffeners, pillowball rear suspension joints, stiffer rear axles, different springs and shocks, etc).

06-14-2017, 04:31 PM	#2373
JonRZ Member Join Date: Jan 2017 Drives: 2017 CWP BRZ w/ PP Location: Pittsburgh, PA Posts: 80 Thanks: 62 Thanked 102 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Just wanted to add that the JDM STI badge and setting works with the 2017 bumper as I installed it on mine but the positioning is a bit lower (under the first grille fin) as opposed to the top; and only 1 of the 2 pre-cut holes 'snap-in' which still keeps it durable with a screw. Hard to describe but it works. I believe the Michigan spotted BRZ which had the STI logos on it had that in the front grille as well. Attached Images

06-16-2017, 02:46 AM	#2379
brz-times Member Join Date: Jun 2017 Drives: 2016 Subaru BRZ Hikari edition Location: Vancouver Posts: 29 Thanks: 2 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	BRZ Ts parts no alcantara please ... first impression is good but not good for care it Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Parts for my FR-S	hyperpunx	Interior Parts (Incl. Lighting)	1	03-05-2013 05:28 PM
[Group Deals] SoCal Subaru BRZ parts or Any Parts	Giccin	Southern California	25	08-26-2012 10:30 AM

06-12-2017, 04:19 PM	#2369
tacos Senior Member Join Date: Dec 2016 Drives: 09 impreza, 01 crv, 17 brz PP Location: dallas Posts: 144 Thanks: 179 Thanked 119 Times in 72 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	awwww no alcantara wheel

06-15-2017, 12:42 PM	#2375
Jfheisenberg Senior Member Join Date: Jan 2015 Drives: 2015 BRZ Series Blue WRB Location: North Jersey Posts: 830 Thanks: 371 Thanked 204 Times in 156 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	When will subaru release the red trim ?!?!

06-15-2017, 01:28 PM	#2376
fourdegrees Member Join Date: Jun 2014 Drives: None Location: Home Posts: 44 Thanks: 0 Thanked 8 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	They need to stop dragging their feet releasing specifics. I'm ready to pull the trigger on a 2017 with PP but waiting on the final release specs of this car.

User Name		Remember Me?
Password