AP Racing brake systems in development - Page 30 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dave-ROR · 11-16-2012, 07:45 PM

Not that I've noticed. It is covered in brake dust though.

Matt Andrews · 11-19-2012, 10:35 AM

Quote:

Originally Posted by Paragon

There goes the track set up. Anyone running 9 inch wide wheels without spacers with this brake setup?

yes. I am. the Mach V 17x9 fits fine and weighs under 18 lbs.

Dave-ROR · 11-19-2012, 04:19 PM

Has anyone looked to see how large of spacers we'll need to clear OEM wheels? I never bring an OEM wheel with me to check...

Hanakuso · 11-19-2012, 04:42 PM

Quote:

Originally Posted by Dave-ROR

Has anyone looked to see how large of spacers we'll need to clear OEM wheels? I never bring an OEM wheel with me to check...

I used the template and it seems to be around 5mm. Not 100% but its around that.

I'm hoping my 20mm or 25mm spacers will work with the spare tire or else I'll have to deal with fix-a-flat cans

Dave-ROR · 11-19-2012, 04:56 PM

Quote:

Originally Posted by Hanakuso

I used the template and it seems to be around 5mm. Not 100% but its around that.

I'm hoping my 20mm or 25mm spacers will work with the spare tire or else I'll have to deal with fix-a-flat cans

Nice! I might just buy 10mm spacers just to be safe. I just carry one or two of the OEM wheels with me instead of using the OEM spare

Well that's if I'm doing a road trip, around town I'll just deal with it however I need to.

Dave-ROR · 11-20-2012, 09:28 AM

For those with this setup, can you post which wheels fit and with which spacers if needed?

For me I'm using the obvious one 17x8 +45 RPF1s no spacers.

UncleFester · 11-20-2012, 09:40 AM

Quote:

Originally Posted by Dave-ROR

For those with this setup, can you post which wheels fit and with which spacers if needed?

For me I'm using the obvious one 17x8 +45 RPF1s no spacers.

Same. I did discover that the 17x9 version does not fit with either kit.

CSG Mike · 11-20-2012, 09:42 AM

Quote:

Originally Posted by Dave-ROR

Has anyone looked to see how large of spacers we'll need to clear OEM wheels? I never bring an OEM wheel with me to check...

It'll barely clear with a 5mm. 7mm would be safer to account for any possible expansion during use.

On a side note, we're looking into some Rays options that'll clear the kit...

JRitt · 11-20-2012, 09:55 AM

FYI...we're doing a special Black Friday deal on the Endurance System this weekend if anyone is interested. Definitely don't expect to see this again any time soon! Thanks.

MSTiFK8R · 11-20-2012, 10:01 AM

Quote:

Originally Posted by UncleFester

Same. I did discover that the 17x9 version does not fit with either kit.

17x9 is oа some wheels NOT APPLICABLE? which ET was that?

I hope the Endurance System will be safe with RAYS 18" Gram Light 57xtremes FRONT 18x8.5 +33, the spokes seem so wide there

as I can't measure them yet, It's a matter of luck by now... I've asked some guys having access to these pretties to use Essex's fitment template to make sure

Mike

Dave-ROR · 11-20-2012, 12:18 PM

Quote:

Originally Posted by MSTiFK8R

17x9 is oа some wheels NOT APPLICABLE? which ET was that?

I hope the Endurance System will be safe with RAYS 18" Gram Light 57xtremes FRONT 18x8.5 +33, the spokes seem so wide there

as I can't measure them yet, It's a matter of luck by now... I've asked some guys having access to these pretties to use Essex's fitment template to make sure

Mike

The Enkei RPF1 17x9's specifically won't fit due to the design of the spokes, even in +35. However other 17x9s like the Mach V Awesome's fit fine. Spoke design is key here.

MSTiFK8R · 11-22-2012, 06:26 AM

Jeff, hulllooooooow

PM ring-a-ding !

Hanakuso · 11-26-2012, 03:02 PM

Jeff or anyone else, are you expecting anymore AP Racing pads for this kit or the OEM rear? I've been reading up and it seems there is a AP Racing H200. It's less aggressive then the C300 and cheaper. I'm just not sure what to match up the rear with the C300, other then the upcoming C300 rear pads

Dave-ROR · 11-26-2012, 03:08 PM

Quote:

Originally Posted by Hanakuso

Jeff or anyone else, are you expecting anymore AP Racing pads for this kit or the OEM rear? I've been reading up and it seems there is a AP Racing H200. It's less aggressive then the C300 and cheaper. I'm just not sure what to match up the rear with the C300, other then the upcoming C300 rear pads

They are making C300 and S100's for OEM rear fitment, but I don't believe that they have been released yet. At least I don't have mine yet

Hopefully they'll come in this week or first half of next week and I'll just pick them up at Essex next week.

11-16-2012, 07:45 PM	#407
Dave-ROR Site Moderator Join Date: Dec 2010 Drives: Stuff Location: Florida Posts: 10,317 Thanks: 955 Thanked 5,965 Times in 2,689 Posts Mentioned: 262 Post(s) Tagged: 8 Thread(s)	Not that I've noticed. It is covered in brake dust though. __________________ -Dave Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback DD: 2005 Acura TSX Tow: 2022 F-450 Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4 Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX Projects: 2013 Subaru BRZ Limited track car build FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles

11-19-2012, 04:19 PM	#409
Dave-ROR Site Moderator Join Date: Dec 2010 Drives: Stuff Location: Florida Posts: 10,317 Thanks: 955 Thanked 5,965 Times in 2,689 Posts Mentioned: 262 Post(s) Tagged: 8 Thread(s)	Has anyone looked to see how large of spacers we'll need to clear OEM wheels? I never bring an OEM wheel with me to check... __________________ -Dave Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback DD: 2005 Acura TSX Tow: 2022 F-450 Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4 Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX Projects: 2013 Subaru BRZ Limited track car build FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles

11-20-2012, 09:28 AM	#412
Dave-ROR Site Moderator Join Date: Dec 2010 Drives: Stuff Location: Florida Posts: 10,317 Thanks: 955 Thanked 5,965 Times in 2,689 Posts Mentioned: 262 Post(s) Tagged: 8 Thread(s)	For those with this setup, can you post which wheels fit and with which spacers if needed? For me I'm using the obvious one 17x8 +45 RPF1s no spacers. __________________ -Dave Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback DD: 2005 Acura TSX Tow: 2022 F-450 Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4 Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX Projects: 2013 Subaru BRZ Limited track car build FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles

11-20-2012, 09:55 AM	#415
JRitt Join Date: Feb 2012 Drives: 2012 BRZ Premium WRB 6MT Location: Charlotte NC Posts: 689 Thanks: 224 Thanked 1,411 Times in 376 Posts Mentioned: 80 Post(s) Tagged: 3 Thread(s)	FYI...we're doing a special Black Friday deal on the Endurance System this weekend if anyone is interested. Definitely don't expect to see this again any time soon! Thanks. __________________ Jeff Ritter\|Mgr.- High Performance Division Exclusive Importer AP Racing and Ferodo Racing www.essexparts.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BC Racing Coilovers with Free Stainless Steel Brake Lines!!!	Dustin@Dynosty	Brakes, Suspension, Chassis	21	01-08-2013 10:34 AM
SS Racing Brake Line	K1 Motor Works	Brakes, Suspension, Chassis	5	06-29-2012 02:36 AM
Essex/AP Racing Competition Brake System in Development	JRitt	Brakes, Suspension, Chassis	1	06-14-2012 01:32 PM
Secondary Rear Brake Caliper for drifting or parking brake?? (pics)	Axel	Scion FR-S / Toyota 86 GT86 General Forum	20	02-25-2010 10:28 AM

11-22-2012, 06:26 AM	#418
MSTiFK8R Senior Member Join Date: Jul 2012 Drives: BRZ WRB Location: Country of Bears Posts: 336 Thanks: 257 Thanked 264 Times in 82 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Jeff, hulllooooooow PM ring-a-ding !

11-26-2012, 03:02 PM	#419
Hanakuso Senior Member Join Date: Apr 2012 Drives: FR-S Location: California Posts: 1,956 Thanks: 294 Thanked 673 Times in 390 Posts Mentioned: 11 Post(s) Tagged: 2 Thread(s)	Jeff or anyone else, are you expecting anymore AP Racing pads for this kit or the OEM rear? I've been reading up and it seems there is a AP Racing H200. It's less aggressive then the C300 and cheaper. I'm just not sure what to match up the rear with the C300, other then the upcoming C300 rear pads

User Name		Remember Me?
Password