Visconti Tuning - Latest BRZ Flash Info - Page 418 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Carwhisperer · 07-23-2013, 11:25 PM

Quote:

Originally Posted by ft86me

You might wanna open a ticket for that like ASAP

No, I'm going to fix it myself with a local tuner.

ft86me · 07-23-2013, 11:28 PM

those of you that WENT 12psi pulley did you need a new belt?

Sport-Tech · 07-24-2013, 12:10 AM

Quote:

Originally Posted by atledreier

Had my stg1 pumpgas done yesterday, along with a catback. Apart from sound it doesn't really feel any different.... A little more after the torquedip perhaps, but not much. The features are cool though.

Are there any way to adjust the autoblip? It seems to blip way too little for any kind of revmatching...

Probably need a modified tune - put in a request. From what I have read they can adjust the amount of throttle autoblip, but you can't.

Visconti · 07-24-2013, 07:26 AM

Quote:

Originally Posted by Carwhisperer

Got CEL P0011 and P0351. The Cams on my car are fucked on v1.14. Going back to stock it runs perfect. Idk whats going on anymore with my car.
Not even going to try and go back and run data logs, not safe at all.

It's not the tune

The cam mapping that's in this tune has been setup like this since day 1... 10 months now. I've made several slight tweaks over the months... Nothing that's drastically different from stock

JiB · 07-24-2013, 07:34 AM

I finally found out what all the danger talk was about with auto blip this morning hahah. for some reason the car started on map 4, or i forgot i put it on. either way. came into a tight corner in 3rd, was going to downshift but decided against it just as i touched the clutch while braking, so i just tapped the clutch. then the car jumps into the corner pulling for half a sec, heart rate skyrocketed

Visconti · 07-24-2013, 07:51 AM

Quote:

Originally Posted by JiB

I finally found out what all the danger talk was about with auto blip this morning hahah. for some reason the car started on map 4, or i forgot i put it on. either way. came into a tight corner in 3rd, was going to downshift but decided against it just as i touched the clutch while braking, so i just tapped the clutch. then the car jumps into the corner pulling for half a sec, heart rate skyrocketed

I wasn't kidding !

JiB · 07-24-2013, 07:56 AM

Quote:

Originally Posted by Visconti

I wasn't kidding !

lol nope... tomorrow im going to try and re create it in a safer environment.

from what i can tell, for it to work you have to be over 3k rpm and faster than 60km/h.

Is that right?

Visconti · 07-24-2013, 07:57 AM

Quote:

Originally Posted by JiB

lol nope... tomorrow im going to try and re create it in a safer environment.

from what i can tell, for it to work you have to be over 3k rpm and faster than 60km/h.

Is that right?

And faster than. 40mph

Bahraini86 · 07-24-2013, 08:03 AM

Quote:

Originally Posted by Visconti

And faster than. 40mph

Any updates on new customers tunes? When u gonna send em out?

Visconti · 07-24-2013, 08:11 AM

Quote:

Originally Posted by Bahraini86

Any updates on new customers tunes? When u gonna send em out?

Didn't think there were any new tune requests , I'll have to double check, but plan on getting everything out shortly

Bahraini86 · 07-24-2013, 08:19 AM

Quote:

Originally Posted by Visconti

Didn't think there were any new tune requests , I'll have to double check, but plan on getting everything out shortly

Thanks....

Btw.. Request number #2531 and I'm looking forward for my first tune

Foobar · 07-24-2013, 08:51 AM

Quote:

Originally Posted by ft86me

I gues I'm pretty behind?
v1.01b3

Just one release behind. That was the same version I was on until this past weekend when it jumped to 1.06

Ryan86 · 07-24-2013, 09:26 AM

Hi John,
Im going in for service with Toyota on Friday and they going to connect up to verify the SW A001 upgrade. I loaded my stock A001 ROM file and ran for a day, the CEL came on due to the header O2 sensor. Load the tune back and the CEL was cleared.
I was under the impression this would not happen while on the stock ROM with Ecutek?.
I have purchased a spacer and will install to prevent CEL with or without tune.

Then Ive tried V1.13 and v1.14 and both tunes in map 2 to 4, launch control is not working, sent a ticket.

the autoblip is frikkin awesome BTW.

JimmyMac · 07-24-2013, 10:01 AM

Yeah, I finally figured out how auto-blip works. You can get all the way down into 2nd gear. I used to hate it because it seemed inconsistent, but now that I knew exactly how its working, it seems more fun to play with. I haven't tried launch control with this version. I'll have to see if it works. I'm always on map 4. Maybe I need to try the other maps.

07-24-2013, 07:34 AM	#5843
JiB * Join Date: May 2012 Drives: GT86 Location: Sydney Posts: 845 Thanks: 525 Thanked 266 Times in 144 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I finally found out what all the danger talk was about with auto blip this morning hahah. for some reason the car started on map 4, or i forgot i put it on. either way. came into a tight corner in 3rd, was going to downshift but decided against it just as i touched the clutch while braking, so i just tapped the clutch. then the car jumps into the corner pulling for half a sec, heart rate skyrocketed __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 02:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 10:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 07:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) -- General Topics	130	09-01-2011 01:42 PM

07-23-2013, 11:28 PM	#5840
ft86me Senior Member Join Date: Feb 2013 Drives: 2013 FRS Location: Endor Posts: 1,231 Thanks: 802 Thanked 349 Times in 212 Posts Mentioned: 60 Post(s) Tagged: 1 Thread(s)	those of you that WENT 12psi pulley did you need a new belt?

07-24-2013, 09:26 AM	#5851
Ryan86 Road Warrior Join Date: Nov 2012 Drives: Toyota 86 Satin Pearl White Location: Durban, South Africa Posts: 1,651 Thanks: 181 Thanked 544 Times in 359 Posts Mentioned: 59 Post(s) Tagged: 0 Thread(s)	Hi John, Im going in for service with Toyota on Friday and they going to connect up to verify the SW A001 upgrade. I loaded my stock A001 ROM file and ran for a day, the CEL came on due to the header O2 sensor. Load the tune back and the CEL was cleared. I was under the impression this would not happen while on the stock ROM with Ecutek?. I have purchased a spacer and will install to prevent CEL with or without tune. Then Ive tried V1.13 and v1.14 and both tunes in map 2 to 4, launch control is not working, sent a ticket. the autoblip is frikkin awesome BTW.

07-24-2013, 10:01 AM	#5852
JimmyMac Senior Member Join Date: Aug 2012 Drives: 2013 FR-S, 2016 Miata Club Location: NC Posts: 785 Thanks: 183 Thanked 258 Times in 171 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Yeah, I finally figured out how auto-blip works. You can get all the way down into 2nd gear. I used to hate it because it seemed inconsistent, but now that I knew exactly how its working, it seems more fun to play with. I haven't tried launch control with this version. I'll have to see if it works. I'm always on map 4. Maybe I need to try the other maps.

User Name		Remember Me?
Password