Saskatchewan Thread

[IIDutch]

Originally Posted by whiteaozora

Most clutches are rated in torque. Watch out if you are running ethanol. Will have to let justin or LJ know when buying. Even on my upgraded stage 1 I will need to replace springs. Maybe even piston heads to lower compression. 450 is a lot. I would say make ur goal like 350.. 300 forsure is possible

I know our motor is definetly capable of high hp, theres a 800+hp one in Formula D, it most definetly has built internals but I have yet to see the limit of our stock internals with the gas we have here. Maybe I'll start with 300-350, if I ever want more its easier to dump money into built internals while your current ones are in working order cause then you choose when you do it haha

[TB]

My thoughts, if you're going to go through the money for a built FA20, why not swap a 2J?

[IIDutch]

Originally Posted by TB

My thoughts, if you're going to go through the money for a built FA20, why not swap a 2J?

Cause I cant put THAT much haha, close to 5k for an engine, almost 6 for a god v160 getty transmission plus all the wiring custom mounts, and most likely the loss of things like AC and such. Itd be awesome but IMO a track only setup. I wouldnt build the fa20 for a while, and decided on a Stage 1 FBM kit with a GT2871r turbo which will get me to my 350whp goal easily on 94.

If I was to do the 2j I wouldnt have the money for the rocket bunny/wheels/suspension/and the other goodies I have planned

Plus Id love to prove some nay sayers that boxer engines can make good power (non of you guys, just some car enthusiast acquantences)

[TB]

Originally Posted by IIDutch

Cause I cant put THAT much haha, close to 5k for an engine, almost 6 for a god v160 getty transmission plus all the wiring custom mounts, and most likely the loss of things like AC and such. Itd be awesome but IMO a track only setup. I wouldnt build the fa20 for a while, and decided on a Stage 1 FBM kit with a GT2871r turbo which will get me to my 350whp goal easily on 94.

If I was to do the 2j I wouldnt have the money for the rocket bunny/wheels/suspension/and the other goodies I have planned

Very fair point! As for your buddy who wants the aimgain kit, make sure you convince him on the '15 STI... I want the aimgain and I want to be the only one please and thank you

[IIDutch]

Originally Posted by TB

Very fair point! As for your buddy who wants the aimgain kit, make sure you convince him on the '15 STI... I want the aimgain and I want to be the only one please and thank you

Hahaha he's pretty set on it :p I'm learning fiberglass fabrication and have concepts and designs for a widebody that I want to buuld though

[SkAsphalt]

As for the clutch. there are a lot of clutches that will handle 300 wTQ out there. Don't worry about that (twin disks, stage 3's etc) you will be able to find them. FT86Speedfactory sells quite a few.

Clutch is in, car is back to being a normal car again! (well a normal car that can run some more boost)

[JPxM0Dz]

Went back to HT Auto side skirts on the BRZ, Got them today! But I'm mostly pumped about this new toy

Here's a quick shot of my new Galaxy Tab S 8.4 LTE, yes it can serve as a cell! Size comparison next to my Galaxy S5. Sorry for the crappy pic, it was taken with an iPhone, lol my stab at Apple
It's identical to the S5 in a lot of ways, only Super Sized XXL
A few quick specs, it has a Super AMOLED screen with a 2560 x 1600 resolution, that's 360PPI
Samsung's very own Octa-Core Processor [Dual Quad Core Processors - One running at 1.9Ghz and the other running at 1.3Ghz] 8MP rear camera and 2.1MP front camera. 16GB Storage with 3GB on board Ram! Crazy 4,900mAH Battery and best of all, this thing is only 6.6mm thick

[IIDutch]

Originally Posted by JPxM0Dz

In car data logger and electronic dash

Any of you guys be interested in buying some Borla UEL Uncatted headers? About 1500km on them. I'd include my Axle Back Muffler Delete with Burnt tips as well. Will be selling them in a few months as I'll be going forced induction in the first few months next year

[JPxM0Dz]

Originally Posted by IIDutch

In car data logger and electronic dash

Any of you guys be interested in buying some Borla UEL Uncatted headers? About 1500km on them. I'd include my Axle Back Muffler Delete with Burnt tips as well. Will be selling them in a few months as I'll be going forced induction in the first few months next year

Wow that was quick

Sent from OmegaROM S5

[IIDutch]

Originally Posted by JPxM0Dz

Wow that was quick

Sent from OmegaROM S5

I can't help it :P

[SkAsphalt]

Jesus..too many people going FI (I say this out of worry my car is no longer unique)

[IIDutch]

Originally Posted by SkAsphalt

Jesus..too many people going FI (I say this out of worry my car is no longer unique)

Dont worry Nick I'll always envy your cars colour! Wish the ashpalt manual I was looking at didnt sell before I could get to it

[SkAsphalt]

Originally Posted by IIDutch

Dont worry Nick I'll always envy your cars colour! Wish the ashpalt manual I was looking at didnt sell before I could get to it

haha well I think everyone has colour envy some days. I see red cars and think "Damn, I wish I had red, you can do so much awesome contrasting colours with black" Same with the silver and white. A black roof, black out the space between the fangs on the front bumper, etc. Looks so fun

The only colours I do not really feel envious of are black (I had a black car once, plus asphalt is close enough) and the burnt orange/lava one.

[whiteaozora]

Turbo/ supporting goodies are here! Install time!!!