Innovate (Sprintex) Supercharger Owners Topic - Page 354 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xjohnx · 07-01-2014, 09:23 PM

Quote:

Originally Posted by DriftEm

I'm running a Perrin, fits with no issues.

thanks. just to verify, you're intercooled right?

DriftEm · 07-01-2014, 09:25 PM

Here is a picture of Perrin heat exchange core installed, this is before the Innovate IC was installed but you get an idea of fitment:

DriftEm · 07-01-2014, 09:28 PM

Quote:

Originally Posted by xjohnx

thanks. just to verify, you're intercooled right?

Yes, I got IC

Ethan · 07-01-2014, 09:43 PM

I am running the Robispec Total Cooling Solution which integrates the oil cooler into a larger radiator. I am also running an intercooler. No fitment issues.

xjohnx · 07-01-2014, 09:50 PM

Quote:

Originally Posted by DriftEm

Here is a picture of Perrin heat exchange core installed, this is before the Innovate IC was installed but you get an idea of fitment:

thanks. looks like i may have to slightly relocate my radar detector's antenna, but that's no big deal. already repacked everything and have my amazon return being processed, we'll see how quick that is. i'll probably go ahead and order the perrin tomorrow anyway.

xjohnx · 07-01-2014, 10:14 PM

Quote:

Originally Posted by Ethan

I am running the Robispec Total Cooling Solution which integrates the oil cooler into a larger radiator. I am also running an intercooler. No fitment issues.

yeah, i looked into that (and almost bought @civicdrivr's) but the stock fan shroud/fans wouldn't fit, among other issues/missing pars that robi didn't ship. by the time i added a fan shroud and fans, it got expensive in a hurry.

CK_Bladesmith · 07-01-2014, 11:52 PM

Had a slight problem today. Noticed a vacuum leak and when I got home, decided to take apart my catch can and hoses to clean and find the source

In the process I accidentally pulled off the crankcase breather line from the block and here's what I found

Name: ImageUploadedByTapatalk1404272928.704731.jpg
Views: 1185
Size: 220.4 KB

Name: ImageUploadedByTapatalk1404272928.704731.jpg
Views: 1185
Size: 220.4 KB

Is there supposed to be oil just sitting there like that on this engine? Anyway I noticed the dirty side line that goes into the catch can is always saturated with oil, and the clean side is nice and clean, but there's never any real accumulation in the can.

So what am I missing here?

Draco-REX · 07-02-2014, 06:50 AM

Quote:

Originally Posted by Ethan

I am running the Robispec Total Cooling Solution which integrates the oil cooler into a larger radiator. I am also running an intercooler. No fitment issues.

Really? I had to bend the intercooler brackets to get the heat exchanger to fit. Otherwise it was hitting the bumper beam.

Draco-REX · 07-02-2014, 07:43 AM

Quote:

Originally Posted by xjohnx

yeah, i looked into that (and almost bought @civicdrivr's) but the stock fan shroud/fans wouldn't fit, among other issues/missing pars that robi didn't ship. by the time i added a fan shroud and fans, it got expensive in a hurry.

I'm using my stock fans on my Robispec radiator. .

xjohnx · 07-02-2014, 08:22 AM

Quote:

Originally Posted by Draco-REX

I'm using my stock fans on my Robispec radiator. .

maybe his didn't come with brackets? It was probably 8-9 months ago when we tried to install it. @civicdrivr - do you remember?

Draco-REX · 07-02-2014, 08:29 AM

Quote:

Originally Posted by xjohnx

maybe his didn't come with brackets? It was probably 8-9 months ago when we tried to install it. @civicdrivr - do you remember?

I just looked under my hood and the stock fan assembly bolts right up to the radiator. I bought mine a little under a year ago.

swift996 · 07-02-2014, 08:49 AM

I ran the Mishimoto radiator (stock fans clip right on), Innovate heat exchanger, and Perrin oil cooler without and issues:

civicdrivr · 07-02-2014, 09:07 AM

Quote:

Originally Posted by xjohnx

maybe his didn't come with brackets? It was probably 8-9 months ago when we tried to install it. @civicdrivr - do you remember?

Yea, the stock fans were hitting the hose bungs. We'd have to either trim the fans a lot, or just run aftermarket fans.

Draco-REX · 07-02-2014, 09:33 AM

Quote:

Originally Posted by civicdrivr

Yea, the stock fans were hitting the hose bungs. We'd have to either trim the fans a lot, or just run aftermarket fans.

I'll take another look later. I was lazy and had my friend's shop put it in, so I don't know if they had to trim the shroud or not. It wasn't evident on my quick look earlier.

07-01-2014, 11:52 PM	#4949
CK_Bladesmith Senior Member Join Date: Feb 2013 Drives: Raven FR-S Location: Victoria TX Posts: 335 Thanks: 372 Thanked 95 Times in 75 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Had a slight problem today. Noticed a vacuum leak and when I got home, decided to take apart my catch can and hoses to clean and find the source In the process I accidentally pulled off the crankcase breather line from the block and here's what I found Is there supposed to be oil just sitting there like that on this engine? Anyway I noticed the dirty side line that goes into the catch can is always saturated with oil, and the clean side is nice and clean, but there's never any real accumulation in the can. So what am I missing here? __________________ Raven FR-S mods: Unichip, Ground Control street coilovers with camber plates and strut tower brace, SPC Lca's, Drag DR-38 wheels with Dunlop Direzza DZ101s, Perrin CAI and silicone inlet tube, Perrin 3" resonated catback, Perrin high flow catted front pipe, Rev Works UEL header.

07-02-2014, 08:49 AM	#4954
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 954 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	I ran the Mishimoto radiator (stock fans clip right on), Innovate heat exchanger, and Perrin oil cooler without and issues: __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 10:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 06:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 12:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-17-2012 11:38 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 05:14 PM

07-01-2014, 09:43 PM	#4946
Ethan Member Join Date: Jul 2012 Drives: Subaru BRZ Location: San Diego, CA Posts: 85 Thanks: 56 Thanked 40 Times in 26 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I am running the Robispec Total Cooling Solution which integrates the oil cooler into a larger radiator. I am also running an intercooler. No fitment issues.

User Name		Remember Me?
Password