*** Aggressive wheels? Post them up! *** Thread - Page 157 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

moomoopanda · 05-09-2014, 12:41 PM

Quote:

Originally Posted by Kosmos

Hey could ya link me the front lca's

Sent from my SM-N900P using Tapatalk

RacerX makes front lower control arms, not sure if any other company does yet..

http://www.racerxfabrication.com/pro...trol_arms.html

JdelFrs · 05-09-2014, 12:59 PM

Quote:

Originally Posted by moomoopanda

RacerX makes front lower control arms, not sure if any other company does yet..

http://www.racerxfabrication.com/pro...trol_arms.html

Yea find out what my problem ! The bags itself because of the camber rubbing in the inner wall ! So I need to put less camber or find a way to put the same camber but to back up the bags it self! Dont know how to do that ...

PradiG · 05-09-2014, 01:03 PM

Quote:

Originally Posted by nab335

looks reallyyyyyyy good but notching is just going to make it worse. you will need to tone down camber to make it drivable considering you are on bags.

Quote:

Originally Posted by JdelFrs

Even at -3 bags is rubbing can't really put less camber. I Need more stretch if I want to have less camber! I am not sure if I rubs on the linner or the inner wall ! I will try to sort it out today.

Quote:

Originally Posted by moomoopanda

The more expensive option may be to get front LCA's to get more camber and then dial out the plate so your bag stops rubbing...

What size tire are you running? Doesn't look like too extreme of a stretch.

The way he got -5 up front is through the camber plate. Only way to get camber is to notch strut and take off camber from the camber plate so it doesn't rub. I'm running -1.5 camber up front and that's the max I can run without having the bag rub on the inner wall.

JdelFrs · 05-09-2014, 01:12 PM

Yea i am running 215/40 on 18x9 & 225/40 on a 18x9.5! I could run more stretched than run less camber and maybe try to remove some camber from the camber plate ! I just need to do that quick since I dont want to break my front bags -_-! I could use 215/35 & 225/35 and get more clearance from that!

Xerious · 05-09-2014, 02:26 PM

Quote:

Originally Posted by larryw

Ebphoto's car . Hope he doesn't mind me sharing.

18x9.5 +25
225/40/18
front rolled/slight pull and rear was pulled

Car looks beautiful! How do you get the paint to shine like that?

WhiteLightning · 05-09-2014, 02:37 PM

Quote:

Originally Posted by JdelFrs

Yea i am running 215/40 on 18x9 & 225/40 on a 18x9.5! I could run more stretched than run less camber and maybe try to remove some camber from the camber plate ! I just need to do that quick since I dont want to break my front bags -_-! I could use 215/35 & 225/35 and get more clearance from that!

That's what I'm on. Looks and rides great.

Redstar · 05-09-2014, 02:51 PM

Quote:

Originally Posted by moomoopanda

Took this last weekend..

stancypants · 05-09-2014, 05:21 PM

Quote:

Originally Posted by JdelFrs

Final camber spec but still not driveble

I need to notch the frame to clear my bags since at the moment they are rubbing on the inner wall

.

*spec are -5 front & -7.6 rear*

But here a shot almost air out

What size lips do you have ? looks great

JdelFrs · 05-09-2014, 05:34 PM

Quote:

Originally Posted by stancypants

What size lips do you have ? looks great

2.5'' front & 3'' rear !

I just sort out that Watercooled made a mistake in spec ... they made 18x9+8 & 18x9.5+8 too... I removed all my camber from front and now i can drive but i don't think my fender would love it since there 0 clearance from it!

Speed Element · 05-09-2014, 07:13 PM

tigermack · 05-09-2014, 07:21 PM

OH TITTTTTTTTIES!!

AznKirby · 05-10-2014, 12:30 AM

Quote:

Originally Posted by JdelFrs

2.5'' front & 3'' rear !

I just sort out that Watercooled made a mistake in spec ... they made 18x9+8 & 18x9.5+8 too... I removed all my camber from front and now i can drive but i don't think my fender would love it since there 0 clearance from it!

Seriously? After all this time they made a mistake on the specs?
Bad, bad, bad service. Meilleure chance la prochaine fois...

Ostevennn · 05-10-2014, 01:10 AM

plan on going lower, just have some clearence issues with my wheels at the moment. but heres my setup. i think its aggressive worthy.

[IMG]

[/IMG]

drftxx · 05-11-2014, 11:40 PM

Im getting bored of my wheels -.- someone trade me!

On Stance coils with swift springs, Stance LCA and work xt7 WMB 18x9.5+27

05-10-2014, 01:10 AM	#2197
Ostevennn Junior Member Join Date: Sep 2013 Drives: Red 13 Scion FRS Location: Montclair CA Posts: 8 Thanks: 0 Thanked 6 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	plan on going lower, just have some clearence issues with my wheels at the moment. but heres my setup. i think its aggressive worthy. [IMG][/IMG]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post the Wheels You want On your FRS/BRZ!!	Zaku	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1742	10-11-2017 04:29 PM
RPF1 and PF01 aggressive fitment size requests	Crossover Auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	10-22-2012 02:30 PM
post VIN with any problem thread?	fistpoint	Issues \| Warranty \| Recalls / TSB	0	10-04-2012 10:11 PM
Do aggressive offsets cause more debris to kick up into the paint?	switchlanez	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	09-26-2012 10:03 PM
Scion FR-S / Toyota FT-86 / Subaru with Aggressive Body & High Wing! + VIDEO!	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	538	06-15-2011 02:20 AM

05-09-2014, 01:12 PM	#2188
JdelFrs Senior Member Join Date: Oct 2013 Drives: 2013 Fr-S Release Series 10 (MT6) Location: Canada Posts: 107 Thanks: 0 Thanked 72 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Yea i am running 215/40 on 18x9 & 225/40 on a 18x9.5! I could run more stretched than run less camber and maybe try to remove some camber from the camber plate ! I just need to do that quick since I dont want to break my front bags -_-! I could use 215/35 & 225/35 and get more clearance from that!

05-09-2014, 07:13 PM	#2194
Speed Element Join Date: May 2012 Drives: FR-S, Evo X, IS-F, 335i, STi, LS460 Location: San Jose, CA Posts: 3,058 Thanks: 189 Thanked 302 Times in 154 Posts Mentioned: 38 Post(s) Tagged: 0 Thread(s)

05-09-2014, 07:21 PM	#2195
tigermack STX 188 Join Date: Mar 2014 Drives: STX BRZ Location: Bay Area, CA Posts: 881 Thanks: 830 Thanked 624 Times in 308 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	OH TITTTTTTTTIES!!

05-11-2014, 11:40 PM	#2198
drftxx Senior Member Join Date: Feb 2014 Drives: 2013 WRB BRZ Location: Chicago Posts: 131 Thanks: 3 Thanked 32 Times in 15 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Im getting bored of my wheels -.- someone trade me! On Stance coils with swift springs, Stance LCA and work xt7 WMB 18x9.5+27

User Name		Remember Me?
Password