Seibon or APR rear diffuser cover??? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cslntuee · 12-19-2013, 07:41 PM

Quote:

Originally Posted by vividracing

I sell a lot of both companies and in my opinion they are both great. However APR makes a better fitment.

Will APR fit with BRZ OEM rear diffuser without any modify?
http://www.subarugenuineparts.com/product_info.php?cPath=132_133&products_id=1876

Thanks.

vividracing · 12-19-2013, 07:58 PM

let me contact APR to confirm.

Quote:

Originally Posted by cslntuee

Will APR fit with BRZ OEM rear diffuser without any modify?
http://www.subarugenuineparts.com/product_info.php?cPath=132_133&products_id=1876

Thanks.

enjoi23 · 12-20-2013, 02:53 AM

Quote:

Originally Posted by charged86

thanks ya i have their brake ducts i am getting the TB seibon lip though

how do the brake ducts fit btw, I have them also but they didn't fit perfect lol.

charged86 · 12-20-2013, 08:38 AM

Quote:

Originally Posted by enjoi23

how do the brake ducts fit btw, I have them also but they didn't fit perfect lol.

your right. I had to get creative but in there defense if you ever had to pull out and reinstall the OEM foglight you have to bend the piece of plastic slightly.

RFB · 12-20-2013, 01:11 PM

Quote:

Originally Posted by Superhatch

The bottom photo looks like it was taken with a nice camera. The top photo looks like it was taken with a potato.

I think that will influence this poll greatly.

The Seibon looks MUCH nicer than the potato photo shows.It has a very deep 3-d high gloss which changes colour depending on the lighting (black,silver,gold).

Also - it attaches without drilling holes and using rivets like the other one.

There have been warped Seibon parts in the past so it is best to check fitment. When I got mine the deal was - check it before leaving the store, if warped no deal.
It was a little snug but acceptable.

ToyoBaru uses soapy plastic (that no glue sticks to) so Seibon advises to use the red (iron oxide) hi-temp silicone.
I used gasket silicone (2 large tubes to get enough surface adhesion), a clamp on each side a heat lamp and 12 hours drying.

Been bullet proof, through Kanadian weather, and lots of tracking.
Best part was that I got it for free ! ( I was rear ended, which left 2 licence plate bolt dents in the soapy plastic that had to be covered ).

CERBERUS

Wonderbar · 12-20-2013, 05:52 PM

If I had to pick one of those things, I'd go with the apr one

bkblitzed · 12-20-2013, 06:31 PM

both looks kinda gross

View Poll Results: Seibon or APR rear diffuser cover
Seibon	3	11.54%
apr	23	88.46%
Voters: 26. You may not vote on this poll

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free-Rear bumper cover (entire rear facia) replaced after slight rear-end collision	n7011n	Exterior Parts (Aero, Lighting, Etc.)	7	03-26-2014 04:46 AM
FS: FRS BRZ OEM Rear Diffuser	gvan1998	Exterior Parts (Aero, Lighting, Etc.)	2	12-14-2013 01:23 PM
rear diffuser..	jonperezinsd	BRZ First-Gen (2012+) -- General Topics	10	07-02-2013 08:13 AM
SEIBON CARBONFIBER REAR SPOILER LIP	JimmyCrez	Cosmetic Modification (Interior/Exterior/Lighting)	2	06-12-2013 01:34 PM
Seibon CF TA sides and KC rear lips	Do Boy	Cosmetic Modification (Interior/Exterior/Lighting)	10	12-23-2012 08:28 AM

12-20-2013, 06:31 PM	#21
bkblitzed is better than you Join Date: Jun 2013 Drives: 2013 raven FRS Location: Norcal Posts: 1,293 Thanks: 591 Thanked 1,347 Times in 745 Posts Mentioned: 25 Post(s) Tagged: 0 Thread(s)	both looks kinda gross

User Name		Remember Me?
Password