DIY 2014 Navigation unit **FULLY working 6/19** Pandora/Weather/Traffic/ETC... - Page 12 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

pwguy · 09-16-2013, 10:11 PM

Quote:

Originally Posted by bloomer510

I am hoping someone can help me. I ordered the Entune module to install on my 2013 FR-S (bought it about a month ago, loving it). I have the 2014 head unit. I plugged everything up according to this thread, double and triple checked everything. The module included the Y connector, and I made sure the connector on the bottom was also connected properly. When I power the unit up, there is no difference in the radio (no apps, no maps, no nothing), and acts as if i never installed a module to it. Is anyone else having similar issues or know how to fix this? Thank you!

Quote:

Originally Posted by pwguy

Same problem here. Gave up on it last night but will be rechecking everything later today.

I have now had the HU out about 4 times and have also triple checked all the connections. I carefully inspected the cable and all the pins and they appear fine. The HU doesn't recognize the nav unit. Guess I need to talk to the place where I bought mine and listen to their suggestions.

pwguy · 09-17-2013, 07:26 PM

I contacted the dealer I purchased the nav unit from and they were very responsive. They ended up sending a PDF of the installation instructions which was very helpful. When I did the reset procedure outlined in the photos everything came up working fine.

Chillz · 09-30-2013, 02:57 AM

Quote:

Originally Posted by pwguy

I have now had the HU out about 4 times and have also triple checked all the connections. I carefully inspected the cable and all the pins and they appear fine. The HU doesn't recognize the nav unit. Guess I need to talk to the place where I bought mine and listen to their suggestions.

Hey I ran into this issue. After many days of removals and reinstallations, I discovered the problem was that I needed to reset the display headunit. I disconnected my battery overnight and the next day I powered up the headunit and it recognized the entune unit. I hope the same will work for you.

RCRacer · 09-30-2013, 12:42 PM

Quote:

Originally Posted by pwguy

I contacted the dealer I purchased the nav unit from and they were very responsive. They ended up sending a PDF of the installation instructions which was very helpful. When I did the reset procedure outlined in the photos everything came up working fine.

Where do I mount the GPS/Antenna?
Do you have a copy of the Installation Manual you can send me?

RCRacer · 09-30-2013, 01:12 PM

Just got the Add-On Nav/Bespoke!

P@ul · 09-30-2013, 11:22 PM

Quote:

Originally Posted by RCRacer

Just got the Add-On Nav/Bespoke!

Super random question for you; do you know what the part number is on the pigtail cable? The one that connects the bespoke box to the stereo?

Calavera · 09-30-2013, 11:52 PM

Quote:

Originally Posted by RCRacer

Where do I mount the GPS/Antenna?
Do you have a copy of the Installation Manual you can send me?

Metal bar runs across the back of the interior in the dash - behind the stereo. Held nicely with the magnet and signal is strong.

Sent from my iPhone using Tapatalk - now Free

RCRacer · 10-01-2013, 11:57 AM

Quote:

Originally Posted by Calavera

Metal bar runs across the back of the interior in the dash - behind the stereo. Held nicely with the magnet and signal is strong.

Cool Thanks!

RCRacer · 10-01-2013, 11:58 AM

Calavera · 10-01-2013, 02:26 PM

You did better than me. Good job!

rskdsk · 10-02-2013, 08:49 PM

I bought:
PT296-47130 Navigation module with Entune
PT591-00140 oem brackets
OEM GPS antenna

for my series 10. Installation was easy. So far I have the Nav working but have not played with anything else. It appears I still need the Enturn app to use the other stuff

Overland'n'5thGEN · 10-03-2013, 04:28 PM

Just a heads up Entune will not work with our cars. At least that is what Toyota told me.

I did have it working when I first put mine in but got an email a month later saying they were canceling my service since I did not really own the vin number I used to activate.

I am trying to contact Toyota again and see if I can get it activated.

DOTman05 · 10-04-2013, 06:41 PM

What's the price on the add on?

P@ul · 10-07-2013, 03:46 AM

I looked up some stuff and I found the Pioneer premium bespoke 2014 unit here (http://scionpartspeople.scionofpuyal...remium%20Audio) and it's only $847, which sounds really reasonable for me. That's not a whole lot more than the prius v module.

I just bought a used touchscreen + nav + entune out of a 2012 Corolla and it didn't come with a y cable to connect the harman box to the touchscreen. The seller says there weren't any cables and I can't find shit online... =( In case anyone is wondering, there is no voice activation button, no SSP options and no tuning options to select your vehicle. Starting to regret that impulse buy... not sure if I can flash it AND get the stupid cable.

09-17-2013, 07:26 PM	#156
pwguy Member Join Date: Aug 2013 Drives: FR-S 10 Series Location: New Mexico Posts: 11 Thanks: 1 Thanked 12 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Got it working I contacted the dealer I purchased the nav unit from and they were very responsive. They ended up sending a PDF of the installation instructions which was very helpful. When I did the reset procedure outlined in the photos everything came up working fine. __________________ Life is too short to drive ugly cars

10-01-2013, 02:26 PM	#164
Calavera Senior Member Join Date: May 2013 Drives: Scion FR-S Whiteout Location: Texas Posts: 415 Thanks: 92 Thanked 149 Times in 94 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	You did better than me. Good job! __________________ If my calculations are correct, when this baby hits 88 miles per hour... you're gonna see some serious shit.

10-03-2013, 04:28 PM	#166
Overland'n'5thGEN Senior Member Join Date: Feb 2013 Drives: 5th Gen Toyota 4Runner Location: SF Bay Area Posts: 397 Thanks: 82 Thanked 129 Times in 98 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Just a heads up Entune will not work with our cars. At least that is what Toyota told me. I did have it working when I first put mine in but got an email a month later saying they were canceling my service since I did not really own the vin number I used to activate. I am trying to contact Toyota again and see if I can get it activated. __________________ Build thread for Amber

10-07-2013, 03:46 AM	#168
P@ul Apostle Join Date: Apr 2013 Drives: JesusMobile Location: SoCal Posts: 282 Thanks: 276 Thanked 83 Times in 48 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	I looked up some stuff and I found the Pioneer premium bespoke 2014 unit here (http://scionpartspeople.scionofpuyal...remium%20Audio) and it's only $847, which sounds really reasonable for me. That's not a whole lot more than the prius v module. I just bought a used touchscreen + nav + entune out of a 2012 Corolla and it didn't come with a y cable to connect the harman box to the touchscreen. The seller says there weren't any cables and I can't find shit online... =( In case anyone is wondering, there is no voice activation button, no SSP options and no tuning options to select your vehicle. Starting to regret that impulse buy... not sure if I can flash it AND get the stupid cable. Last edited by P@ul; 10-07-2013 at 12:29 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Scion Standard Radio for 2014	NedVargar	Electronics \| Audio \| NAV \| Infotainment	45	06-13-2013 09:00 PM
WTB: Pioneer Premium Audio radio/head unit	tech4pdx	Canada Classifieds	2	04-14-2013 07:31 PM
Sirus Radio on Stock head Unit	wtout86	Electronics \| Audio \| NAV \| Infotainment	3	11-20-2012 02:22 PM
Fitting the radio plug into aftermarket head unit	GC GTS Aero Kit	Electronics \| Audio \| NAV \| Infotainment	1	10-29-2012 05:41 AM
head unit in GTA	excited86	Electronics \| Audio \| NAV \| Infotainment	1	06-18-2012 07:42 PM

09-30-2013, 01:12 PM	#159
RCRacer Member Join Date: Dec 2012 Drives: 2013 FRS Whiteout Location: South Bay - Los Angeles Posts: 10 Thanks: 0 Thanked 4 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just got the Add-On Nav/Bespoke!

10-01-2013, 11:58 AM	#163
RCRacer Member Join Date: Dec 2012 Drives: 2013 FRS Whiteout Location: South Bay - Los Angeles Posts: 10 Thanks: 0 Thanked 4 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)

10-02-2013, 08:49 PM	#165
rskdsk Member Join Date: Sep 2013 Drives: series 10 FR-S (2361) Location: Cape Coral, FL Posts: 88 Thanks: 1 Thanked 57 Times in 18 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I bought: PT296-47130 Navigation module with Entune PT591-00140 oem brackets OEM GPS antenna for my series 10. Installation was easy. So far I have the Nav working but have not played with anything else. It appears I still need the Enturn app to use the other stuff

10-04-2013, 06:41 PM	#167
DOTman05 Member Join Date: Apr 2012 Drives: Evo 8 Location: SoCal Posts: 76 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What's the price on the add on?

User Name		Remember Me?
Password