Carbotech XP8 Track Pads - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Keenercarguy · 07-19-2018, 09:17 PM

Maybe 6 or 7 AutoX's and a couple hundred Street miles. They're pretty close to new. These are $337 new, I'm asking $215 OBO SHIPPED CONUS.

I've had these for a good while now, stored inside and in the dark, and I was using them for AutoX and intended to use them for HPDE as well. I bed them orginally into freshly turned rotors and then swapped between these (for competition) and Carbotech 1521's (for street) the day before and day after an event. Unfortunately I'm not doing any competitive events at the moment and won't be able to in the near future, so I don't need track pads as much as I need money for living expenses. You can run these no problem on the street as long as you don't mind some occasional squeal. Carbotech dust is not corrosive so it won't hurt the finish on wheels! I'm obviously open to offers and thank you for looking.

PHOTOS HERE

FRStevan · 07-19-2018, 11:20 PM

Sorry, I just have a question. How do you find the 1521's for street use? I've been looking for a solid daily pad.

Keenercarguy · 07-21-2018, 02:38 AM

Quote:

Originally Posted by FRStevan

Sorry, I just have a question. How do you find the 1521's for street use? I've been looking for a solid daily pad.

They're great for daily use, no complaints there. However when it comes to really pushing them on a mountain (I brake hard and late) they do tend to overheat a bit quickly, or rather: get a bit grabby and lose the linear nature I like in a fun pad. I'm transitioning away from them (after probably 25,000 miles) pretty soon as well, they've done well but I'm changing it up to something in between the 1521 and XP8 in aggressiveness. If you're really curious I could probably mail you what's left of all four corners for like $20+shipping and you can test them all you want haha
Edit: you're in Canada... not actually sure how shipping would work in that case

Keenercarguy · 07-24-2018, 07:14 PM

Bump OBO

Keenercarguy · 07-30-2018, 08:54 AM

200 shipped

Keenercarguy · 08-05-2018, 02:53 PM

175 shipped just take them lol

eb66 · 08-06-2018, 12:06 PM

Pm'd you

Keenercarguy · 08-06-2018, 03:21 PM

Quote:

Originally Posted by eb66

Pm'd you

Tried to PM you back but it says you're not set up/not allowed to receive private messages, if you're too new of a member that might be the problem. You've got to do a certain number of things to be a full forum member IIRC. You can send me an email address if you'd prefer, or you'll probably be able to receive PM's pretty soon if you're new. I'll try and check back tomorrow.
For now: sale pending

eb66 · 08-07-2018, 11:16 AM

Did you get my message with my email address?

Keenercarguy · 08-08-2018, 07:48 PM

SOLD
mods please close

07-19-2018, 09:17 PM	#1
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	Carbotech XP8 Track Pads Maybe 6 or 7 AutoX's and a couple hundred Street miles. They're pretty close to new. These are $337 new, I'm asking $215 OBO SHIPPED CONUS. I've had these for a good while now, stored inside and in the dark, and I was using them for AutoX and intended to use them for HPDE as well. I bed them orginally into freshly turned rotors and then swapped between these (for competition) and Carbotech 1521's (for street) the day before and day after an event. Unfortunately I'm not doing any competitive events at the moment and won't be able to in the near future, so I don't need track pads as much as I need money for living expenses. You can run these no problem on the street as long as you don't mind some occasional squeal. Carbotech dust is not corrosive so it won't hurt the finish on wheels! I'm obviously open to offers and thank you for looking. PHOTOS HERE __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

07-24-2018, 07:14 PM	#4
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	Bump OBO __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

07-30-2018, 08:54 AM	#5
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	200 shipped __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

08-05-2018, 02:53 PM	#6
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	175 shipped just take them lol __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

08-08-2018, 07:48 PM	#10
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	SOLD mods please close __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

07-19-2018, 11:20 PM	#2
FRStevan Member Join Date: Apr 2017 Drives: 2013 Scion FRS Location: Hamilton, Ontario, Canada Posts: 65 Thanks: 9 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sorry, I just have a question. How do you find the 1521's for street use? I've been looking for a solid daily pad.

08-06-2018, 12:06 PM	#7
eb66 Junior Member Join Date: Mar 2018 Drives: 2015 FRS Location: MA Posts: 6 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Pm'd you

08-07-2018, 11:16 AM	#9
eb66 Junior Member Join Date: Mar 2018 Drives: 2015 FRS Location: MA Posts: 6 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Did you get my message with my email address?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbotech XP8 Track Pads	Keenercarguy	Wheels and Tires	1	07-19-2018 09:13 PM
CarboTech AX6 Pads - Noisy	86_Freak	Tracking / Autocross / HPDE / Drifting	5	03-24-2016 07:50 PM
FS: Carbotech Brake Pads Fr/Rr	torqdork	Brakes, Suspension, Chassis	12	01-25-2015 06:16 PM
Carbotech pads in Canada?	BatStig	CANADA	1	07-15-2012 08:56 AM

User Name		Remember Me?
Password