Completed build - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JK21 · 03-17-2014, 01:42 PM

Ok so I am making this new build thread as a lot of people have been inquiring about the car and what was done, who built it, etc.

I haven't really done a build thread before so here is my best attempt at it.

I will have photos attached below.

Mods done to the car are as follows:
-Built & Sleeved(Darton sleeves) Block
-Carillo Rods
-APE Pistons
-Gaskets
-6466 PTE Turbo Setup; Kit was custom fabricated in house at my shop JMS Racing
-4.5" IC core and piping.
-3" full custom fabricated (by JMS Racing) aluminum exhaust coming into 4" teardrop tips
-BC Coilover system
-Wilwood 4 piston Brakes for the Front stock drums in the rear
-Wheel setup for the street are Nitto 555s (235/35/19-Front) and 265/30/19 in the rear. The rear is being upgraded to 275/30/19. Also have a set of Hoosiers that are P275/45/17 with RPF1s.

All work done at JMS Racing. Only sent the block to AWDtuning to get sleeved (won't happen again). Also the power I made were on my baby injectors and not even my original injectors (2200s). For time sake we tuned on straight e85 and 1300s. The car has plenty left in it but an issue in the software is not letting us go higher than 36 PSI absolute boost or 22 pounds. The fuel constantly wants to lean out. Omni 4.0 bar but it is reading only at 2.5 on higher levels. Once this issue is corrected more power is sure to be gained. Also will be doing my flex fuel tuning this week sometime

Transmission is still stock but will be built here soon as I have already broken 4th gear

Any more questions feel free to ask

The image that apparently got a lot of likes…..THis was a cellphone pic

Thursday night fun w/ a few friends when I got to Houston

z3ro · 03-17-2014, 01:44 PM

looks slow

JK21 · 03-17-2014, 01:50 PM

Quote:

Originally Posted by z3ro

looks slow

If you think this is the fastest car I have you're in for a rude awakening. Run 'em?

2pt5RS · 03-17-2014, 01:54 PM

Quote:

Originally Posted by JK21

If you think this is the fastest car I have you're in for a rude awakening. Run 'em?

I think you completely missed the fact that he was being sarcastic...

JK21 · 03-17-2014, 01:57 PM

Sarcasm is not easy to pick up over a monitor….I apologize but I get a wee bit defensive after you dedicate time to something.

Oh btw here is vid of the start up a friend recorded. Idk about world record though.

chc36 · 03-17-2014, 02:21 PM

Damn, nice build

. How much that all set you back? lol

JK21 · 03-17-2014, 02:28 PM

Quote:

Originally Posted by chc36

Damn, nice build

. How much that all set you back? lol

Well I had great service and hookups but I can say north of 10K

Mikem53 · 03-17-2014, 02:31 PM

Geez.. Nice power! Looks like you did it right.. Love your power:weight thing you got going on... Must be one hell of a ride.. Is it streetable.. I mean
Can you easily drive it as a DD..
Very impressive.. Nice build!

Squishy86 · 03-17-2014, 02:37 PM

I knew things were bigger in Texas.

Jyn · 03-17-2014, 02:52 PM

I am in Austin and I demand a ride. I miss boost.

Tromatic · 03-17-2014, 03:07 PM

Nice. Kudos for not sticking a Rocket Bozo kit on it.

ETA: Or a clown-car wing.

JK21 · 03-17-2014, 03:13 PM

Quote:

Originally Posted by Mikem53

Geez.. Nice power! Looks like you did it right.. Love your power:weight thing you got going on... Must be one hell of a ride.. Is it streetable.. I mean
Can you easily drive it as a DD..
Very impressive.. Nice build!

It can be. Because of the fuel issues we turned it back down to 18psi and it drove very solid (minus me breaking fourth during a test hit

haha)

But once my Flex fuel tune is done pump gas will be used when I drive it long distances and DD. E85 will be for the serious races

Quote:

Originally Posted by Jyn

I am in Austin and I demand a ride. I miss boost.

Nice. I am going to try and bring it to the Oasis C&C soon.

Quote:

Originally Posted by Tromatic

Nice. Kudos for not sticking a Rocket Bozo kit on it.

NEVER!!!!! When I found out you had to shave the car I was like "Nope".

Plus I like the TRD kit that was on the car when I bought it. Simple but still aggressive.

G-Man · 03-17-2014, 03:20 PM

Quote:

Originally Posted by JK21

Only sent the block to AWDtuning to get sleeved (won't happen again).

what's that about?

Pegasus · 03-17-2014, 03:36 PM

Quote:

Originally Posted by Tromatic

Nice. Kudos for not sticking a Rocket Bozo kit on it.

ETA: Or a clown-car wing.

Haha, yeah. We in Texas know putting a clown wing wouldn't be a good idea. Even if we liked the look of a clown wing we wouldn't put one on. To much risk of getting vandalized by a red neck in a jacked up diesel.

03-17-2014, 01:42 PM	#1
JK21 Member Join Date: Jun 2013 Drives: 2013 Scion FR-S Location: San Antonio Posts: 75 Thanks: 41 Thanked 43 Times in 19 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Completed build Ok so I am making this new build thread as a lot of people have been inquiring about the car and what was done, who built it, etc. I haven't really done a build thread before so here is my best attempt at it. I will have photos attached below. Mods done to the car are as follows: -Built & Sleeved(Darton sleeves) Block -Carillo Rods -APE Pistons -Gaskets -6466 PTE Turbo Setup; Kit was custom fabricated in house at my shop JMS Racing -4.5" IC core and piping. -3" full custom fabricated (by JMS Racing) aluminum exhaust coming into 4" teardrop tips -BC Coilover system -Wilwood 4 piston Brakes for the Front stock drums in the rear -Wheel setup for the street are Nitto 555s (235/35/19-Front) and 265/30/19 in the rear. The rear is being upgraded to 275/30/19. Also have a set of Hoosiers that are P275/45/17 with RPF1s. All work done at JMS Racing. Only sent the block to AWDtuning to get sleeved (won't happen again). Also the power I made were on my baby injectors and not even my original injectors (2200s). For time sake we tuned on straight e85 and 1300s. The car has plenty left in it but an issue in the software is not letting us go higher than 36 PSI absolute boost or 22 pounds. The fuel constantly wants to lean out. Omni 4.0 bar but it is reading only at 2.5 on higher levels. Once this issue is corrected more power is sure to be gained. Also will be doing my flex fuel tuning this week sometime Transmission is still stock but will be built here soon as I have already broken 4th gear Any more questions feel free to ask The image that apparently got a lot of likes…..THis was a cellphone pic Thursday night fun w/ a few friends when I got to Houston Attached Images

03-17-2014, 02:37 PM	#9
Squishy86 Senior Member Join Date: Jul 2012 Drives: Your Car Location: San Diego Posts: 439 Thanks: 461 Thanked 225 Times in 115 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I knew things were bigger in Texas. __________________ http://instagram.com/squishy_86

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Vinyl Wrap completed, AMA!	Ironsquid	Cosmetic Modification (Interior/Exterior/Lighting)	121	11-24-2015 07:07 PM
Completed!! FBM 700+HP Build Dyno graph & Vid inside	FullBlown	Forced Induction	214	03-31-2014 01:56 PM
Vinyl wrap completed!!	laley81	Southern California	14	08-30-2013 11:10 PM
Nearly Completed my Firstorm Build - Lots of Pics	msile	Member's Car Journals	52	03-10-2013 10:25 AM
Turbo FRS completed!	Philly	CANADA	24	09-03-2012 09:18 AM

03-17-2014, 01:44 PM	#2
z3ro Banned Join Date: Oct 2013 Drives: 2013 FR-S Location: Shelby, NC Posts: 626 Thanks: 209 Thanked 409 Times in 144 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	looks slow

03-17-2014, 01:57 PM	#5
JK21 Member Join Date: Jun 2013 Drives: 2013 Scion FR-S Location: San Antonio Posts: 75 Thanks: 41 Thanked 43 Times in 19 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Sarcasm is not easy to pick up over a monitor….I apologize but I get a wee bit defensive after you dedicate time to something. Oh btw here is vid of the start up a friend recorded. Idk about world record though.

03-17-2014, 02:21 PM	#6
chc36 Member Join Date: Feb 2014 Drives: 2013 FR-S Ultramarine Location: Baltimore, MD Posts: 60 Thanks: 2 Thanked 22 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Damn, nice build . How much that all set you back? lol

03-17-2014, 02:31 PM	#8
Mikem53 Senior Member Join Date: Apr 2013 Drives: FR-S 6MT Location: Somewhere in Space Posts: 1,565 Thanks: 500 Thanked 882 Times in 433 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Geez.. Nice power! Looks like you did it right.. Love your power:weight thing you got going on... Must be one hell of a ride.. Is it streetable.. I mean Can you easily drive it as a DD.. Very impressive.. Nice build!

03-17-2014, 02:52 PM	#10
Jyn Noob Join Date: Jan 2014 Drives: FR-S Mammogram Location: Austin Posts: 1,585 Thanks: 574 Thanked 870 Times in 479 Posts Mentioned: 24 Post(s) Tagged: 2 Thread(s)	I am in Austin and I demand a ride. I miss boost.

03-17-2014, 03:07 PM	#11
Tromatic Banned Join Date: May 2013 Drives: FR-S Location: Portland, OR Posts: 2,232 Thanks: 61 Thanked 1,728 Times in 786 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Nice. Kudos for not sticking a Rocket Bozo kit on it. ETA: Or a clown-car wing.

User Name		Remember Me?
Password