SOCAL: Local FS/FT

[oyalep]

Originally Posted by OzzyGT86

BUMP individual posts also up on classifieds. Turbo kit added as well.

still have the Crash Bar available?

[OzzyGT86]

Originally Posted by oyalep

still have the Crash Bar available?

Pending sale for this Sunday brother

[Krazy]

Originally Posted by Krazy

WTS ACT SB7-HDG6 6 puck clutch kit.

Purchased back on August 22nd 2018 used about for a year. Daily driven to work and spirited driving about 7k-8k miles

$550 OBO

Bump

[tk1.frs]

WTS These
Blox LCA - $180
SPC Toe Arms - $110
TRD Rep 37J Painted - $100




Sent from my iPhone using Tapatalk

[DarkSideFRS]

Originally Posted by tk1.frs

WTS These
Blox LCA - $180
SPC Toe Arms - $110
TRD Rep 37J Painted - $100




Sent from my iPhone using Tapatalk

Pix of TRD rep ducbill? How's the paint condition and fitment?

[89_Manny]

Originally Posted by 89_Manny

For SALE.
Located in Riverside County, but I work in Garden Grove.

Eibach SPORTLINE Kit (Set of 4 Springs) has roughly 45k miles on it. Missing one front bump stop $130



OEM Sway Bars off ‘13 Fr-S. All bushings included $70


Rear all weather mats. $20




Sent from my iPhone using Tapatalk

Bump OBO


Sent from my iPhone using Tapatalk

[j0hnislife]

Selling Ecutek kit! Includes cable, dongle, and case. Will need license. $250.

Located in Ventura County. PM or text (805) 758-0510, thanks!

[DGMlJDlBRZ]

Originally Posted by DGMlJDlBRZ

Hey guys, this will be the first of likely many part out posts for my BRZ, so stay tuned for any future posts.


For now, I'll be starting off with a couple of parts off my car. Haven't been able to enjoy the car like I had hoped/planned so my car literally ends up sitting the majority of the time in the garage and I'm lucky if I drive it twice a month, so the majority of the parts, if not all of them, are in great condition.


- VIS Racing VRS (Varis Style) CF Hood. Had it for about a year. Nothing wrong with it. Will come with the Aerocatch Locking Hood Pins with keys, as well as the rain guards/covers that screw on the bottom side of the hood for the two vents. $750







- Velox/Verus Engineering Non Aggressive Rear Diffuser. Has minimal scratches/scrapes on the bottom of the fins from getting out of my driveway. No bends on the fins. Also has minimal trimming/bending of the cutout for the exhaust because it was previously rubbing against the piping on my old HKS HiPower exhaust. Does not affect performance and you can't tell when mounted. Will come with all original mounting hardware. $350

Bad picture of it, but I'm sure you guys know what it looks like.



If you guys are interested, shoot me a DM. Prices are picked up in Oxnard, CA.

BUMP. Price drop

[OzzyGT86]

Originally Posted by OzzyGT86

Parting out my Turbo FRS build. I will be posting up individual parts in their designated categories with verified pictures in the next few weeks as the parts are taken off. The JDL turbo kit is already spoken for. Everything else is OBO. But lowball offers will be ignored.

-JDL Auto custom full titanium 3 inch overpipe. 1 of 1 display piece. Can supply emails and invoice upon request. Asking $300
-Tomei Expreme Ti 60mm front pipe. Asking $170
-Tomei Type 80 catback. Asking $650
-Custom chassis mounted diffuser designed for single exit catback. Asking $230

All OEM parts with less than 1000 miles
-Oem header asking $150
-oem front pipe asking $80
-Oem muffler asking $50

-Cusco catch can. Asking $90
-Moto East Flex Fuel sensor w/ red LED display gauge (sec O2 sensor version) asking $420
-DW 65c fuel pump. Asking $60
-DW 700cc injectors with adapters. Asking $175
-E8H color matched Victory Function +20mm fenders with OEM (piston badge) fender inserts. Asking $600
-Drift Armor single front crash bar. SOLD
-APR carbon fiber side skirts. Asking $600
-APR rear bumper spats. Asking $160
-OEM E8H hood. Asking $200
-17x9.5 +40mm Volk TE37SL in Double Pressed Black (Rare spec for the twins/5x100) w/ 255/40 RE71r with 70% tread. Asking $2700

Pictures for ANYTHING available upon request.

BUMP everything is OBO make me an offer.

[SoCal80six]

Parting out built moto/turbo build

Selling motor built by Moto East capable of 650+hp motor is stripped down. Blown head gasket and scorched 1 out of 4 pistons everything is in good shape.
Motor internals-Carrillo rods, Cp pistons 10.1 CR, king main oil bearings, Remix oil pump. Motor has less than 13k miles since rebuild less than 18k miles in total on motor!!-$$ BEST OFFER

Also selling a MAP turbo kit, infamous EBC, turbo smart race port bov, turbo smart wastegate offered from map, precision 5858 turbo, Dw 65c fuel pump I believe, and fic 770cc fuel injectors great condition less than 13k on the kit total-$2500 or BEST OFFER

Also selling-Act Xtclutch disc and plate less than 3k miles on it-$ BEST OFFER

Willing to work out a killer deal if someone is looking to buy a good amount of it!! PM me of interested

Sent from my SM-N950U using Tapatalk

[Prncess_leia]

Originally Posted by OzzyGT86

Parting out my Turbo FRS build. I will be posting up individual parts in their designated categories with verified pictures in the next few weeks as the parts are taken off. The JDL turbo kit is already spoken for. Everything else is OBO. But lowball offers will be ignored.

-JDL Auto custom full titanium 3 inch overpipe. 1 of 1 display piece. Can supply emails and invoice upon request. Asking $300
-Tomei Expreme Ti 60mm front pipe. Asking $170
-Tomei Type 80 catback. Asking $650
-Custom chassis mounted diffuser designed for single exit catback. Asking $230
-Complete stock exhaust (OEM header, overpipe, front pipe and catback) asking $550
-Cusco catch can. Asking $90
-Moto East Flex Fuel sensor w/ red LED display gauge (sec O2 sensor version) asking $400
-DW 65c fuel pump. Asking $60
-DW 700cc injectors with adapters. Asking $175
-E8H color matched Victory Function +20mm fenders with OEM (piston badge) fender inserts. Asking $600
-Drift Armor single front crash bar. Asking $100
-APR carbon fiber side skirts. Asking $600
-APR rear bumper spats. Asking $160
-OEM E8H hood. Asking $200
-17x9.5 +40mm Volk TE37SL in Double Pressed Black (Rare spec for the twins/5x100) w/ 255/40 RE71r with 70% tread. Asking $2400

Pictures for ANYTHING available upon request.

What’s still available?


Sent from my iPhone using Tapatalk

[Prncess_leia]

Originally Posted by DGMlJDlBRZ

Hey guys, this will be the first of likely many part out posts for my BRZ, so stay tuned for any future posts.


For now, I'll be starting off with a couple of parts off my car. Haven't been able to enjoy the car like I had hoped/planned so my car literally ends up sitting the majority of the time in the garage and I'm lucky if I drive it twice a month, so the majority of the parts, if not all of them, are in great condition.


- VIS Racing VRS (Varis Style) CF Hood. Had it for about a year. Nothing wrong with it. Will come with the Aerocatch Locking Hood Pins with keys, as well as the rain guards/covers that screw on the bottom side of the hood for the two vents. $850







- Velox/Verus Engineering Non Aggressive Rear Diffuser. Has minimal scratches/scrapes on the bottom of the fins from getting out of my driveway. No bends on the fins. Also has minimal trimming/bending of the cutout for the exhaust because it was previously rubbing against the piping on my old HKS HiPower exhaust. Does not affect performance and you can't tell when mounted. Will come with all original mounting hardware. $380

Bad picture of it, but I'm sure you guys know what it looks like.



If you guys are interested, shoot me a DM. Prices are picked up in Oxnard, CA.

Still available?


Sent from my iPhone using Tapatalk

[scottxnizzle]

Originally Posted by scottxnizzle

PART OUT SALE

Just parted ways with my BRZ, I have new and used parts for sale

Shoot me a PM for price and questions! I'm located in Oxnard, CA.

New:
$250 REXPEED Carbon Fiber STI Style Front Lip/Splitter (2013-2016 BRZ)
$140 Toyota OEM GT86 LHD Arm Rest

Used:
$40 Rays Wheels 35mm 12x1.25 Lug Nuts (Blue)
$400 Password JDM Carbon Fiber Progressive Wing
$40 Subaru OEM Sunshade w/ cover

BUMP! OBO please take my stuff! Can meet in San Diego and Oxnard! Thanks!

[DGMlJDlBRZ]

Originally Posted by Prncess_leia

Still available?


Sent from my iPhone using Tapatalk

Yes