installing sensor/adapter for oil temp and pressure - how? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CHMBRZ · 02-06-2018, 12:27 AM

Quote:

Originally Posted by BatStig

I ordered the extension for the Mocal plate from www.batinc.net .

So you just used one long extension screw for the setup?

BatStig · 02-06-2018, 11:04 AM

Quote:

Originally Posted by CHMBRZ

So you just used one long extension screw for the setup?

Unfortunately, no. Two. One for each part. If i remember correctly, the inner diameter of the TRD plate and the Mocal plate are different.

CHMBRZ · 02-06-2018, 01:03 PM

Quote:

Originally Posted by BatStig

Unfortunately, no. Two. One for each part. If i remember correctly, the inner diameter of the TRD plate and the Mocal plate are different.

Ok hence needing the PN ES20 from Bat site?

Sent from my iPhone using Tapatalk

CHMBRZ · 02-07-2018, 02:15 AM

I’m wondering because I have the RacerX fabrications oil cooler was thinking removing the spacer and putting the TRD adapter plate to run the sensors then the racerx oil cooler plate on top. Comes with one long extension screw. Hoping it works.

Sent from my iPhone using Tapatalk

FL4WLSS · 06-28-2018, 01:37 PM

Quote:

Originally Posted by CHMBRZ

I’m wondering because I have the RacerX fabrications oil cooler was thinking removing the spacer and putting the TRD adapter plate to run the sensors then the racerx oil cooler plate on top. Comes with one long extension screw. Hoping it works.

Sent from my iPhone using Tapatalk

So did this work? I am trying to do part research for short block replacement, and wanted to install an oil cooler and oil temp/pressure guage while i was at it.

Sent from my SM-G925V using Tapatalk

CHMBRZ · 06-28-2018, 10:45 PM

I sent you a dm

Firecruiser · 06-29-2018, 06:40 AM

Not sure if they will sell it separately but jackson racing has an adapter plate with 4 ports on it to accommodate both oil cooler and sensors.

https://jacksonracing.com/product/fr...il-cooler-kit/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pressure and temp oil in this car?	pepe	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	2	08-25-2015 05:02 PM
Oil pressure and Oil Temp sensor - where did you mount them and how	philooo	Engine, Exhaust, Transmission	11	05-29-2015 02:41 AM
Installing oil pressure/temp probes	xwd	Engine, Exhaust, Transmission	12	03-14-2015 12:07 AM
Help Installing Oil Temp Gauge	k.houan	Engine, Exhaust, Transmission	1	11-10-2014 11:57 PM
Addition of a radiator hose sensor temp adapter & coolant bleeding	FutureFT86	Engine, Exhaust, Transmission	9	07-21-2014 11:50 PM

02-07-2018, 02:15 AM	#18
CHMBRZ Member Join Date: Aug 2016 Drives: 2016 Subaru BRZ Limited Location: Honolulu, HI Posts: 57 Thanks: 23 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I’m wondering because I have the RacerX fabrications oil cooler was thinking removing the spacer and putting the TRD adapter plate to run the sensors then the racerx oil cooler plate on top. Comes with one long extension screw. Hoping it works. Sent from my iPhone using Tapatalk

06-28-2018, 10:45 PM	#20
CHMBRZ Member Join Date: Aug 2016 Drives: 2016 Subaru BRZ Limited Location: Honolulu, HI Posts: 57 Thanks: 23 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I sent you a dm

06-29-2018, 06:40 AM	#21
Firecruiser Member Join Date: Aug 2016 Drives: 2014 brz Location: York, PA Posts: 65 Thanks: 3 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Not sure if they will sell it separately but jackson racing has an adapter plate with 4 ports on it to accommodate both oil cooler and sensors. https://jacksonracing.com/product/fr...il-cooler-kit/

User Name		Remember Me?
Password