Diode Dynamics Tail-as-Turn™: Make your LED tail a turn signal & add backup LEDs!

[Diode Dynamics]

Originally Posted by Ornelas66

Yesterday I placed an order for XP50 LED lights for my lower back up lights. I also ordered SMD5 for my license plate lights. I am looking to get the more light when I back up and now to convert my brake lights to brake/signal lights. My question is this, if I buy this kit, I should also buy the extra module and I should buy XP80 white lights. Will this exceed the watts and/voltage of my vehicle? Is it bad that I did not get the license plate lights you show in the picture, they were not available, and lastly, I did not get the free shipping discount yesterday

Even with the brightest LEDs on the market in both the lower and upper backup lights, you'll still be using less power than the factory bulbs. LEDs use WAY less power than standard bulbs.

The license plate bulbs you got will work just fine, they've been on the market for years and are a proven quality bulb. It's just time for us to update things and carry a new bulb, but we still won't have them in stock for a while.

Thanks!

[Ornelas66]

Thanks for the help with the two orders. You guys are wonderful to work with and I cannot wait to install my new lights.

[Mechixx]

Hey there, one question i just thought of with buying this mod.
So since this mod uses the LED lights in the back and needs the hyper flashing module to correct it, do i need to make my front turn signals LED lights as well? I was wondering if installing this hyper flashing module with my stock turn signals up front, if they will go super slow?

[Diode Dynamics]

Originally Posted by Mechixx

Hey there, one question i just thought of with buying this mod.
So since this mod uses the LED lights in the back and needs the hyper flashing module to correct it, do i need to make my front turn signals LED lights as well? I was wondering if installing this hyper flashing module with my stock turn signals up front, if they will go super slow?

The new flasher will work with or without LEDs in front. Everything will always blink at the standard speed with this flasher. It just eliminates hyperblinking. Thanks!

[Tea86]

Ordered both!

[arvidj]

Food for thought ...

For those of us who really do want "plug-n-play" offer an add-on the has the two reverse light connectors and then the pigtail to plug into your existing red wire. That way those of us who really do no like the slice type connectors can avoid them.

[buddy32]

Ordered

[Struckbylitenin]

Preordered on announcement day!! LOVE the signals and now I can get that 20% tint I've been wanting and still see out the back with more back-up light POWER!!

I also forgot I had some unused points which combined with the coupon code, made this mod dirt cheap! Thanks DD!

[DC2R]

Hmmm torn on whether to go with this mod or not. Won't be replacing tails for a little while but will be shit out of luck when i do. Must make up mind. How long with this deal be going on for? @Diode Dynamics

Sent from my SM-N900T using Tapatalk

[Diode Dynamics]

Originally Posted by DC2R

Hmmm torn on whether to go with this mod or not. Won't be replacing tails for a little while but will be shit out of luck when i do. Must make up mind. How long with this deal be going on for? @Diode Dynamics

Sent from my SM-N900T using Tapatalk

We'll offer the preorder pricing til Oct. 24th, which is the latest we expect to start shipping.

Little bit of an update for those who have purchased!

We've seen a great response with this product, we we have doubled down on our investment. We'll be making more in our initial production run, and we have purchased some pretty awesome new manufacturing equipment!

Thanks to these improvements, we are lowering the price- The standard price for this mod will now be $30, a full $10 lower than we originally expected. We cannot offer a $10 discount on top of that, but the TAILTURN preorder code will now get you free shipping with your order. Those that have already ordered, we will be refunding your shipping charge if you paid through Paypal, or your credit card transaction will be $5 lower when it goes on your statement.

We'll be sending an email out tonight to all those who have purchased as well. Sorry for the confusion, but we decided this was the best thing to do. When we found out we could lower the price, thanks to the new equipment, we decided to bring the price down for our customers, rather than pocket the extra money. We want as many people as possible to be able to afford our products.

Thanks!

Paul

[Diode Dynamics]

Originally Posted by arvidj

Food for thought ...

For those of us who really do want "plug-n-play" offer an add-on the has the two reverse light connectors and then the pigtail to plug into your existing red wire. That way those of us who really do no like the slice type connectors can avoid them.

Yes, I specifically addressed this in the video- while it would make things very slightly easier, it would add around $15 to the cost of the kit, so we chose not to include them. We may offer it in the future, if we can get the price down, but right now we are focused on bringing as much value for your dollar as possible with this product.

One quick splice is just fine for a non-critical component like this, but you can certainly solder the wire instead if you'd like.

Thanks!
Paul

[tyrantcf]

Really looks like an awesome kit, i was going to get new aftermarket tails, but your stuff has complicated things! Decisions.

[kykiee]

Placed my order!

[NIN69]

Order placed. YouTube video closed the deal.