WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1392 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

new2subaru · 08-16-2018, 05:09 PM

Quote:

Originally Posted by mrg666

Replaced brake pads with Hawk Ceramic Performance. The stock brake pads were getting weaker. When I took them out, I saw that about 1/3 was left. I noticed when installing that the front pads were HB432Z.661 instead of HB711Z.661. The one I have was exactly the same dimensions with the other but it was missing that little spring below

Still worked just fine. So, whatever, I am not returning it. Any comments?

Not required for people who check their pads.

qcbaker · 08-16-2018, 05:34 PM

Just did the clutch spring removal mod and I cannot believe I hadn't taken the 20 minutes or so to do it earlier. No more jerky 1-2 shifts, no more bouncing revs every downshift, it seriously feels like a different car.

To anyone who is considering this mod, do it as soon as you have a moment. Cannot recommend it enough.

Ashikabi · 08-16-2018, 05:37 PM

Quote:

Originally Posted by mrg666

Replaced brake pads with Hawk Ceramic Performance. The stock brake pads were getting weaker. When I took them out, I saw that about 1/3 was left. I noticed when installing that the front pads were HB432Z.661 instead of HB711Z.661. The one I have was exactly the same dimensions with the other but it was missing that little spring below

Still worked just fine. So, whatever, I am not returning it. Any comments?

Totalled. Do I smell a part out?

mrg666 · 08-16-2018, 06:10 PM

Quote:

Originally Posted by new2subaru

Not required for people who check their pads.

You referring to blue arrow, I am asking about the red arrow which is missing with the pad I installed.

new2subaru · 08-16-2018, 06:22 PM

Quote:

Originally Posted by mrg666

You referring to blue arrow, I am asking about the red arrow which is missing with the pad I installed.

I have Hawk DTC 30's and don't have that piece. I have no clue what they're for and have always snapped them off. I don't use shims either.

EDIT Still may be part of the wear tab. Weight reduction lol They're a pain if you're flipping back and forth between pads.

mrg666 · 08-16-2018, 07:08 PM

Quote:

Originally Posted by new2subaru

I have Hawk DTC 30's and don't have that piece. I have no clue what they're for and have always snapped them off. I don't use shims either.

EDIT Still may be part of the wear tab. Weight reduction lol They're a pain if you're flipping back and forth between pads.

Thanks! I am not that worried either since the brakes are are working great. Technical curiosity ...

new2subaru · 08-16-2018, 07:38 PM

Quote:

Originally Posted by mrg666

Thanks! I am not that worried either since the brakes are are working great. Technical curiosity ...

Now, I'm curious...

Tcoat · 08-16-2018, 08:43 PM

Quote:

Originally Posted by new2subaru

I have Hawk DTC 30's and don't have that piece. I have no clue what they're for and have always snapped them off. I don't use shims either.

EDIT Still may be part of the wear tab. Weight reduction lol They're a pain if you're flipping back and forth between pads.

Quote:

Originally Posted by mrg666

Thanks! I am not that worried either since the brakes are are working great. Technical curiosity ...

It just gives tension to help reduce noise from vibration. No other purpose.

new2subaru · 08-16-2018, 08:46 PM

Quote:

Originally Posted by Tcoat

It just gives tension to help reduce noise from vibration. No other purpose.

Thanks T!

Roth · 08-18-2018, 06:16 AM

Finished to fit the eibach pro kit lowering springs. Easy, no need for special tools. Can't drive th car yet as I need to replace the sway bar links, which will come on tuesday. I needed to cut them out, damn rust (long winters and salty roads of Norway).

new2subaru · 08-18-2018, 10:36 PM

More weight reduction. It's a single seater now lol According to my math and weights from around the forum I'm down 180lbs+

I can't wait to drive it tomorrow.

The front bumper and the 3 plastic pieces you have to remove below are a PITA. I'm going to make a single piece out of aluminum come winter. The rest of the car is a dream to work on.

Ashikabi · 08-18-2018, 11:20 PM

Quote:

Originally Posted by new2subaru

More weight reduction. It's a single seater now lol According to my math and weights from around the forum I'm down 180lbs+

I can't wait to drive it tomorrow.

The front bumper and the 3 plastic pieces you have to remove below are a PITA. I'm going to make a single piece out of aluminum come winter. The rest of the car is a dream to work on.

Just get a big splitter

N1rve · 08-19-2018, 12:21 AM

Got a new steering wheel today

BFIFE22 · 08-19-2018, 12:33 AM

Quote:

Originally Posted by N1rve

Got a new steering wheel today

Looks fantastic! Is that a custom wrapped OEM wheel? Looks cleaner than other aftermarkets and similar to the discontinued TRD wheel, AKA I want it lol

08-19-2018, 12:21 AM	#19487
N1rve Senior Member Join Date: Oct 2013 Drives: 2019 BMW ///M4 Location: Los Angeles, CA Posts: 2,332 Thanks: 102 Thanked 1,167 Times in 714 Posts Mentioned: 28 Post(s) Tagged: 0 Thread(s)	Got a new steering wheel today __________________ N1rve 2019 BMW ///M4 - Alpine White \| Sakhir Orange/Black Leather \| M-DCT \| Executive Package \| 19" Black 437M Wheels \| Carbon Fiber Trim \| Sunroof \| Active Blind Spot \| Heated Steering Wheel \| Adaptive M Suspension

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM

08-16-2018, 05:34 PM	#19476
qcbaker Shitpost Generator v8.6 Join Date: Jun 2018 Drives: 2013 FR-S Location: Pennsylvania Posts: 359 Thanks: 216 Thanked 416 Times in 211 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Just did the clutch spring removal mod and I cannot believe I hadn't taken the 20 minutes or so to do it earlier. No more jerky 1-2 shifts, no more bouncing revs every downshift, it seriously feels like a different car. To anyone who is considering this mod, do it as soon as you have a moment. Cannot recommend it enough.

08-18-2018, 06:16 AM	#19484
Roth Member Join Date: Sep 2017 Drives: 2013 Gt86 Location: Sunnmøre - Norway Posts: 61 Thanks: 19 Thanked 40 Times in 21 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Finished to fit the eibach pro kit lowering springs. Easy, no need for special tools. Can't drive th car yet as I need to replace the sway bar links, which will come on tuesday. I needed to cut them out, damn rust (long winters and salty roads of Norway).

08-18-2018, 10:36 PM	#19485
new2subaru Weight Weenie Join Date: Aug 2015 Drives: 15 FR-S Location: Canada Posts: 2,584 Thanks: 5,015 Thanked 2,330 Times in 1,346 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	More weight reduction. It's a single seater now lol According to my math and weights from around the forum I'm down 180lbs+ I can't wait to drive it tomorrow. The front bumper and the 3 plastic pieces you have to remove below are a PITA. I'm going to make a single piece out of aluminum come winter. The rest of the car is a dream to work on.

User Name		Remember Me?
Password