NEED HELP ABOUT J2 enginering exhaust

[NYCsubaruBRZ]

ok i figured out how 2 post pics

[NYCsubaruBRZ]

ok nvm idk how 2 post a pic lol

[NYCsubaruBRZ]

OK.... i put the pics on my profile



PLEASE HELP!!!!!!!!!!!!!!!!!!!!!

THANKS

[troek]

[NYCsubaruBRZ]

Originally Posted by troek

ohhh. i thought this was one peice. how does the gasket come off? and what about the 1/2in peice of pipe sticking out now?


thanks again 4 ur help

[NYCsubaruBRZ]

hopefully i can get this exhaust on before auto cross next weekend

[naikaidriver]

Originally Posted by NYCsubaruBRZ

ohhh. i thought this was one peice. how does the gasket come off? and what about the 1/2in peice of pipe sticking out now?

You should be able to gently pry that o-ring off with a flathead screwdriver. If you mess it up, its not the end of the world since they are inexpensive.

The male end of the front pipe should fit inside the J2 pipe.

Good luck to you.

Scott

[NYCsubaruBRZ]

thanks bro!

[NYCsubaruBRZ]

Originally Posted by trackratnick

Anyone have a idea for a intake now?? Do i go drop in or a full? Im definitely going to do a sound box delete.

i just installed the wrinkle black injen intake..... what a difference

[tnt]

Originally Posted by kristo naibaho

i need a coment about J2 enginering exhaust, its that agood stuff or not. how about the sound, about the engine power please dude i need a help

I saw another post in the forum about J2 Engineering Exhaust ... was about $350.

http://www.ft86club.com/forums/showthread.php?t=31153

[naikaidriver]

Originally Posted by tnt

I saw another post in the forum about J2 Engineering Exhaust ... was about $350.

http://www.ft86club.com/forums/showthread.php?t=31153

That's a hell of a deal. I just wonder how long that exhaust will last though. Cracking in the welds, rusting, ect.

Scott

[AG3NT_5CARFAC3]

Im planing on getting the J2 Quad catback exhaust with the Injen shortram...you think thats a good setup?

[SmsAlSuwaidi]

Just to give you guys a heads up, I've been running their front pipe with my buddy club for a month now and it does have multiple issues

It does not mount with most cat backs properly because the dount gasket would not properly insert into the front pipe !. I do have a really minimal amount of leaking between the two parts but I'm going to suck it up considering its a cheap part. In addition to the fitment issues the material it's made out of is not that great too. The last issue was it moving around the frame and that was because the bolt that would hold the front pipe (the stock one ) was insufficient to do the job because of the way the J2 front pipe was designed, and I ended up using a longer bolt with a nut.


I only stated the negative issues just so you guys know what's up with it, but never the less it is a cheap investment thats worth the money

[hunter3232792]

Originally Posted by SmsAlSuwaidi

Just to give you guys a heads up, I've been running their front pipe with my buddy club for a month now and it does have multiple issues

It does not mount with most cat backs properly because the dount gasket would not properly insert into the front pipe !. I do have a really minimal amount of leaking between the two parts but I'm going to suck it up considering its a cheap part. In addition to the fitment issues the material it's made out of is not that great too. The last issue was it moving around the frame and that was because the bolt that would hold the front pipe (the stock one ) was insufficient to do the job because of the way the J2 front pipe was designed, and I ended up using a longer bolt with a nut.


I only stated the negative issues just so you guys know what's up with it, but never the less it is a cheap investment thats worth the money

im sorry to hear you have that issue i have the j2 front pipe and 0 issues so far