Random Thoughts - Part Deux [NO POLITICS] - Page 1333 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

go_a_way1 · 09-23-2016, 12:54 PM

Quote:

Originally Posted by Andrew025

$36k? What...

I ordered a 17 BRZ limited for $26k...

#Canada

FX86 · 09-23-2016, 12:55 PM

Quote:

Originally Posted by go_a_way1

$60k for a nice one :/ plus when I am done the FRS will be faster anyways

the camaro did lose the world's greatest drag race so it's considered slow now

Andrew025 · 09-23-2016, 12:55 PM

Quote:

Originally Posted by go_a_way1

#Canada

Well then... Nevermind 😅

go_a_way1 · 09-23-2016, 01:11 PM

I am to lazy to search so what parts from the 17 86 are worth putting on the FRS? I kinda want that intake manifold, however the red is god awful ugly so I would paint it. I need to take the manifold off for the turbo install anyways so why not switch it? Thoughts??

Tcoat · 09-23-2016, 01:14 PM

Quote:

Originally Posted by go_a_way1

I am to lazy to search so what parts from the 17 86 are worth putting on the FRS? I kinda want that intake manifold, however the red is god awful ugly so I would paint it. I need to take the manifold off for the turbo install anyways so why not switch it? Thoughts??

Don't know what is different about it but it very well isn't backwards compatible anyway. It seems from what I have read that the MT 17s still use the old manifold.

go_a_way1 · 09-23-2016, 01:15 PM

Quote:

Originally Posted by Tcoat

Don't know what is different about it but it very well isn't backwards compatible anyway. It seems from what I have read that the MT 17s still use the old manifold.

I thought I saw @ichitaka05 post on facebook that it is?? There was a detailed picture step by step

ichitaka05 · 09-23-2016, 01:18 PM

Quote:

Originally Posted by Tcoat

Don't know what is different about it but it very well isn't backwards compatible anyway. It seems from what I have read that the MT 17s still use the old manifold.

Quote:

Originally Posted by go_a_way1

I thought I saw @ichitaka05 post on facebook that it is?? There was a detailed picture step by step

way1 is correct, I've posted on 86EXPO fb gp that you can use kouki86 (MY17) red intake manifold into zenki86 (pre16). You gotta drill lil bit bigger holes on the ECU bracket, but you can fit it.

Tcoat · 09-23-2016, 01:20 PM

Quote:

Originally Posted by go_a_way1

Well $36,000 for a 17 frs lol! You guys think my next car (likely in 2-3 years) should be a new BRZ so I can have my old gen FRS and a new gen BRZ? I am looking at the Buick Regal GS aswell.

Quote:

Originally Posted by Andrew025

$36k? What...

I ordered a 17 BRZ limited for $26k...

Quote:

Originally Posted by go_a_way1

#Canada

Why do people keep finding these up optioned ones and think that is the going price for stock? I keep reading this $36 to $38K crap but then when you check it out the stock ones are only $29K.

http://wwwa.autotrader.ca/a/Toyota/U...O&orup=2_15_56

Tcoat · 09-23-2016, 01:21 PM

Quote:

Originally Posted by ichitaka05

way1 is correct, I've posted on 86EXPO fb gp that you can use kouki86 (MY17) red intake manifold into zenki86 (pre16). You gotta drill lil bit bigger holes on the ECU bracket, but you can fit it.

Well there you go then. I guess they just don't like AT owners enough to give it to them.

ichitaka05 · 09-23-2016, 01:26 PM

Quote:

Originally Posted by Tcoat

Well there you go then. I guess they just don't like AT owners enough to give it to them.

There were some issue with AT and ECU. Don't remember the exact reasoning, but I remember hearing from one of Toyota engineer from Japan.

HunterGreene · 09-23-2016, 01:34 PM

Good news! It was just a loose drain plug. Points to the wife for guessing correctly. Extra bonus, I have a nice, fresh batch of oil in my car.

And only 7k miles until its time to do the spark plugs...

go_a_way1 · 09-23-2016, 01:44 PM

Quote:

Originally Posted by ichitaka05

There were some issue with AT and ECU. Don't remember the exact reasoning, but I remember hearing from one of Toyota engineer from Japan.

Well if I was putting it on I would retune? Mhe seems like a lot of work for very little gain lol (unless it works magic with FI)

ichitaka05 · 09-23-2016, 01:47 PM

Quote:

Originally Posted by go_a_way1

Well if I was putting it on I would retune? Mhe seems like a lot of work for very little gain lol (unless it works magic with FI)

No need to tune. Manifold have sensor, so shouldn't have much issue having it... if you want every bit of power out of it, I would of get it tuned. But for Zenki owner, interested in doing this, prob best do it if you want FI. NA, I'm not sure. I'm wait more for members testing out

Ashikabi · 09-23-2016, 01:49 PM

Doesn't FBM already have in intake manifold out?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Language Rant Part Deux	MuseChaser	Off-Topic Lounge [WARNING: NO POLITICS]	43	04-23-2017 07:55 PM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 10:00 AM
Random Rubber Part	OoLong	BRZ First-Gen (2012+) -- General Topics	8	01-28-2014 10:31 AM
Crew Carshow : Part Deux 9/7/13	saiyajinimports	Great Lakes	0	08-17-2013 05:18 AM

09-23-2016, 01:49 PM	#18662
Ashikabi Senior Member Join Date: Aug 2014 Drives: 2013 FR-S Location: Northwest Iowa Posts: 7,354 Thanks: 454 Thanked 4,542 Times in 2,947 Posts Mentioned: 59 Post(s) Tagged: 5 Thread(s)	Doesn't FBM already have in intake manifold out?

User Name		Remember Me?
Password