JDL Auto Design - 2014 Exhaust Products - Page 45 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SirBrass · 04-20-2014, 02:28 PM

The JDL UEL headers sound amazingly beastly on my brz. With the hemholtz resonator on the Nameless op/fp which removes the majority of any rasp, it sounds even better.

*brap brap brap BRAWWWWWW BRAWWWWWW* is what it sounds like now. All it needs is a low-rumbling catback or axleback.

On phone I am. Therefore, if mistakes I make, Frank Oz blame you should.

akahenry · 04-20-2014, 05:55 PM

Quote:

Originally Posted by SirBrass

The JDL UEL headers sound amazingly beastly on my brz. With the hemholtz resonator on the Nameless op/fp which removes the majority of any rasp, it sounds even better.

*brap brap brap BRAWWWWWW BRAWWWWWW* is what it sounds like now. All it needs is a low-rumbling catback or axleback.

On phone I am. Therefore, if mistakes I make, Frank Oz blame you should.

sound clips or never happened.

Imrac · 04-21-2014, 03:50 PM

@JDLAutoDesign

Any chance on getting a resonated and catted front pipe?

Thanks!

MoogDiesel · 04-21-2014, 06:01 PM

Quote:

Originally Posted by Imrac

@JDLAutoDesign

Any chance on getting a resonated and catted front pipe?

Thanks!

Yes, inquiring minds want to know.

SirBrass · 04-21-2014, 06:38 PM

@JDLAutoDesign - What about a catback or axleback exhaust that's suitable for those with a loud header (yours, nameless's, borla's, etc) and either hfc or uncatted front pipe?

Would LOVE a purpose-built catback or axleback that was designed to deal with the loud noise and reduce it some to keep street politeness. There's so many more options for those who like loud, but not really much for those who want us to tone it down to about stock level or just a bit louder.

Sirsimon · 04-24-2014, 01:36 PM

@JDLAutoDesign, not trying to nag, just excited. Any update on the latest orders. I think I'm 1344.

Thanks in advance. :-)

toeout · 04-24-2014, 05:55 PM

I'm ready.

JDLAutoDesign · 04-24-2014, 08:39 PM

Quote:

Originally Posted by Sirsimon

@JDLAutoDesign, not trying to nag, just excited. Any update on the latest orders. I think I'm 1344.

Thanks in advance. :-)

Our manchine shop screwed up on a batch of flanges so we just sourced more to cover the few pending orders. We will have yours done next week as the flanges are in route

JDLAutoDesign · 04-24-2014, 08:44 PM

Lots of customers have been wanting exhausts to go with the rest of their JDL parts so here is where we are at

Single and dual options for both 2.5" and 3" systems as well as resonated and non resonated.

Preview pics

xwd · 04-24-2014, 09:25 PM

Nice. Looks like the tip got a little close on the other side.

. Is that 2.5 or 3"?

speargunsandracecars · 04-24-2014, 09:27 PM

Quote:

Originally Posted by JDLAutoDesign

Lots of customers have been wanting exhausts to go with the rest of their JDL parts so here is where we are at

Single and dual options for both 2.5" and 3" systems as well as resonated and non resonated.

Preview pics

Whoa! Looks gorgeous. I think I've found the exhaust I'm looking for. Availability? Also, sound clips!

Jesse@JDLAutodesign · 04-24-2014, 09:29 PM

Quote:

Originally Posted by dwx

Nice. Looks like the tip got a little close on the other side.

. Is that 2.5 or 3"?

Ha i put my car on the dyno at like 2am and hadn't quite finished the hangers on my exhaust so i rigged it with some welding wire...didn't work to say the least.

That one in the pic is 2.5"..I'm finishing up a 3" one that is identical as we speak.

Shit Luck · 04-24-2014, 10:01 PM

Quote:

Originally Posted by Jesse@JDLAutodesign

Ha i put my car on the dyno at like 2am and hadn't quite finished the hangers on my exhaust so i rigged it with some welding wire...didn't work to say the least.

That one in the pic is 2.5"..I'm finishing up a 3" one that is identical as we speak.

Is that a full turbo back 3" by chance...

major quicknap · 04-24-2014, 11:16 PM

Just curious as to why you have that last bend made from so many welded together pieces. Looks very time consuming/labour intensive.

04-24-2014, 11:16 PM	#630
major quicknap Member Join Date: Apr 2014 Drives: blue sardine Location: sydney Posts: 61 Thanks: 28 Thanked 42 Times in 20 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just curious as to why you have that last bend made from so many welded together pieces. Looks very time consuming/labour intensive. __________________ Captain Snooze sends his regards.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDL Auto Design	ft_sjo	User/Vendor/Sponsor Reviews, Feedback, Comments	58	04-28-2017 10:13 AM
JDL Auto Design	alexand3r	User/Vendor/Sponsor Reviews, Feedback, Comments	4	12-11-2013 12:05 PM
New Scion FR-S products by Coverking are now at TAP Auto parts	TAP Auto Parts	Interior Parts (Incl. Lighting)	9	06-06-2013 07:43 AM
Check out some of the new products from Auto Finesse	DetailersDomain	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	2	05-08-2013 08:42 AM
JDL Auto Design...What We Do	JDLAutoDesign	Announcements, Contests, Giveaways	21	10-30-2012 09:05 PM

04-24-2014, 05:55 PM	#623
toeout Senior Member Join Date: Oct 2013 Drives: 2013 FR-S Location: Knoxville, TN Posts: 289 Thanks: 106 Thanked 172 Times in 71 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I'm ready.

04-24-2014, 08:44 PM	#625
JDLAutoDesign Join Date: Jul 2012 Drives: 13 FRS Location: Phx AZ Posts: 1,827 Thanks: 389 Thanked 1,437 Times in 652 Posts Mentioned: 104 Post(s) Tagged: 1 Thread(s)	Lots of customers have been wanting exhausts to go with the rest of their JDL parts so here is where we are at Single and dual options for both 2.5" and 3" systems as well as resonated and non resonated. Preview pics

04-24-2014, 09:25 PM	#626
xwd Senior Member Join Date: Feb 2012 Drives: 2013 DGM Subaru BRZ (Subie #9) Location: ATL, US Posts: 2,667 Thanks: 123 Thanked 860 Times in 552 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Nice. Looks like the tip got a little close on the other side. . Is that 2.5 or 3"?

User Name		Remember Me?
Password