|
Forced Induction Turbo, Supercharger, Methanol, Nitrous |
|
Thread Tools | Search this Thread |
08-05-2014, 07:30 PM | #1 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
AVO turbo kit - 401whp, 314ft/lbs of torque
First, lets just put this out here:
That was done today on the Drift Office dyno, in 90 degree weather. Naturally, this was with e85. To be factual, it was probably closer to e80 given that it's the summer blend. We will be getting some better e85 in for further testing. The car is fitted with the standard AVO turbocharger kit. The standard airbox was used with an AVO high-flow panel filter. Exhaust has been upgraded to a full AVO 3" turbo back exhaust with a catted front pipe (5" cat). An AVO high-flow fuel pump was fitted, and 1000cc injectors to give the necessary fueling. An AVO organic clutch was fitted a while ago, and it held up to the 314ft/lbs of torque without issue. Initial runs went well, but we found out immediately that we were traction limited. So the rear trunk was upgraded with a 200lb technician, which solved that issue nicely. We actually expect to be able to run it out even further in the future when we have some better e85 available that is fresher. |
The Following 9 Users Say Thank You to AVOturboworld For This Useful Post: | Dammod (05-20-2015), Draco_PR23 (08-05-2014), hamzam (05-20-2015), JonAvalon (08-06-2014), midnight23 (08-06-2014), Pete156 (08-07-2014), Sportsguy83 (08-06-2014), Timmy_Jones (05-20-2015), Toyota86.ir (02-02-2016) |
08-05-2014, 07:36 PM | #2 |
Join Date: Mar 2013
Drives: 2013 Firestorm FRS
Location: Lake Elsinore, CA
Posts: 2,707
Thanks: 1,231
Thanked 2,144 Times in 1,003 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
good numbers!
Lol at the "technician" weight mod |
The Following 3 Users Say Thank You to continuecrushing For This Useful Post: |
08-05-2014, 07:53 PM | #3 |
Senior Member
Join Date: Dec 2013
Drives: White
Location: US
Posts: 116
Thanks: 20
Thanked 71 Times in 38 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Jesus this on a stock motor right?
What psi? Do you foresee any future problems running this much power? |
08-05-2014, 07:55 PM | #4 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
This was on a stock motor, which I believe is at the 36,000 mile mark - the majority of that mileage turbocharged. It was doing that power at 14.7 psi, or 1 bar of boost.
I do foresee major rear tire damage in it's future. |
The Following 5 Users Say Thank You to AVOturboworld For This Useful Post: | Deadpool_25 (05-20-2015), Draco_PR23 (08-05-2014), DriftinFRS (05-19-2015), hmong337 (08-06-2014), SkAsphalt (08-06-2014) |
08-05-2014, 07:59 PM | #5 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,531
Thanks: 8,920
Thanked 14,177 Times in 6,835 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
That's some serious power. What kind of cooling does this car have? Does it see any track time or is it just street driven?
|
08-05-2014, 08:09 PM | #6 | |
Senior Member
Join Date: May 2012
Drives: AE86 / FRS / FC3S / GC8 / S14 / R32
Location: Auburn, WA
Posts: 789
Thanks: 633
Thanked 1,431 Times in 372 Posts
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
|
Quote:
Mike : This was done on my car. No cooling mods as of yet, but I'm hankering to see what it does in this heat. I do have an oil cooler setup that we've put together that I'll be offering, don't think I need it as of yet. Here are some more detailed specs...
Cheers! Bob @ Drift-Office, LLC |
|
The Following 3 Users Say Thank You to Drift-Office For This Useful Post: |
08-05-2014, 08:10 PM | #7 |
Senior Member
Join Date: Dec 2013
Drives: White
Location: US
Posts: 116
Thanks: 20
Thanked 71 Times in 38 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I wasn't too sure if a stock motor could run 14 almost 15psi for a long time. We may have different definitions of that though.
|
08-05-2014, 08:14 PM | #8 | |
Senior Member
Join Date: May 2012
Drives: AE86 / FRS / FC3S / GC8 / S14 / R32
Location: Auburn, WA
Posts: 789
Thanks: 633
Thanked 1,431 Times in 372 Posts
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
|
Quote:
I don't think I'll exceed this point given the boost that I'm running, but I'm confident it'll last since I've been running 11-12 PSI on 92 Pump gas for the last year... Going with the logs, everything looks peachy, more so than even regular pump gas, but I'm am going to have to look into higher end fluids and cooling for 'preservation'... Cheers! Bob @ Drift-Office, LLC |
|
08-05-2014, 08:15 PM | #9 |
Senior Member
Join Date: Jul 2012
Drives: 2013 FR-S
Location: Anytown
Posts: 920
Thanks: 73
Thanked 643 Times in 302 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Hey! Wait a minute! Bob I thought you were the anti-E85 guy!
Impressive numbers though. |
The Following 4 Users Say Thank You to FirestormFRS For This Useful Post: |
08-05-2014, 08:19 PM | #10 | |
Senior Member
Join Date: May 2012
Drives: AE86 / FRS / FC3S / GC8 / S14 / R32
Location: Auburn, WA
Posts: 789
Thanks: 633
Thanked 1,431 Times in 372 Posts
Mentioned: 169 Post(s)
Tagged: 2 Thread(s)
|
Quote:
That said, I might as well be the test monkey for this... Bob @ Drift-Office, LLC |
|
The Following 4 Users Say Thank You to Drift-Office For This Useful Post: |
08-05-2014, 08:45 PM | #11 |
in orbe terrum non visi
Join Date: Jan 2014
Drives: violent
Location: Mountains
Posts: 1,747
Thanks: 279
Thanked 762 Times in 446 Posts
Mentioned: 62 Post(s)
Tagged: 1 Thread(s)
|
glad to see avo making big boy numbers. Torque curve looks good, especially for that turbo! and for the record im at 11,000 miles at 18ish psi. YIKES!
__________________
I have E85 where there isn't E85, that's my secret. http://www.ft86club.com/forums/showt...t=reaper+build
|
The Following User Says Thank You to Reaper For This Useful Post: | Drift-Office (08-05-2014) |
08-05-2014, 08:56 PM | #12 |
Twin Screw You
Join Date: Nov 2012
Drives: 2013 Supercharged Whiteout FR-S
Location: Burleson, Texas
Posts: 1,231
Thanks: 464
Thanked 620 Times in 332 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
|
Really impressive numbers. Good job guys.
__________________
|
The Following User Says Thank You to Dustin For This Useful Post: | Drift-Office (08-05-2014) |
08-06-2014, 02:01 AM | #13 |
Senior Member
Join Date: Mar 2013
Drives: R32 GTR, AW11 MR2 SC, GTS86 R
Location: OZ
Posts: 2,615
Thanks: 603
Thanked 1,223 Times in 708 Posts
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
|
Well done Bob!
__________________
|
The Following User Says Thank You to s2d4 For This Useful Post: | Sportsguy83 (08-06-2014) |
08-06-2014, 02:13 AM | #14 | |
Member
Join Date: May 2014
Drives: 2013 FR-S
Location: Vancouver, BC
Posts: 41
Thanks: 4
Thanked 18 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FBM Stage 1 Base Turbo Kit Starting @ $3995 Garrett or PTE Turbo Choices | FullBlown | Forced Induction | 588 | 12-02-2015 02:41 PM |
Greddy turbo kit and AVO world turbo kit SPECIAL PRICING! | THMotorsports.com | Forced Induction | 129 | 07-24-2014 06:51 PM |
FBM Premium Turbo w/SSP High Stall Torque Converter and Racing Valve Body | DeOppressorLiber | Forced Induction | 11 | 04-14-2014 11:59 PM |
nj brand new fa20 turbo kit minus turbo 2500 | kingkai23 | NY / NJ / CT / PA | 3 | 03-06-2014 06:41 PM |