GrimmSpeed Pulley Cover w/Tool Tray - Now Available! - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jeepmor · 04-09-2014, 04:56 AM

What does each version weigh?

GrimmSpeed · 04-09-2014, 11:03 AM

Quote:

Originally Posted by Churg

Definitely needs moar sprinkles.

I could not agree moar.

Quote:

Originally Posted by trd_kid

I'm thinking some sort of cooling tray with a tool tray to match these would be epic! The only two current cooling tray options I know of are both carbon fiber which uhm well doesn't match anything on my car. I bet many others would also like a nice black ,red , or stainless cooling tray under the hood!

I was actually looking into that when I started the design for this pulley cover. However, the obvious place for the tool tray is where the resonator off the airbox goes. I figured the majority of people still have stock air boxes, so deleting this to add a tool tray might be asking a bit much, that's when I figured out the design for the pulley cover, and designed it so it would fit the greatest number of intakes to make it most available to everyone. It might be something I look back into though when I have some spare time.

Quote:

Originally Posted by jeepmor

What does each version weigh?

The powdercoated version comes in at about 3/4 of a lb, and the stainless version comes in at 2lbs

Chase
Engineering

trd_kid · 04-09-2014, 01:06 PM

even if it doesn't have a tool tray I think something like this :

in something other than cf would be great!

azngolfur · 04-09-2014, 03:22 PM

Quote:

Originally Posted by GrimmSpeed

It might even be a convenient place to keep a burrito warm, although I have not tested this yet.

Best... mod... ever. After install, going straight to Chipotle.

major quicknap · 04-09-2014, 05:10 PM

Quote:

Originally Posted by GrimmSpeed

when I have some spare time.

lol

Floggin Tires · 04-10-2014, 12:09 AM

Fictitious Story of a Kid

Installs Pulley Cover/Tool Tray.
"looks clean, seems functional"
Said kid sets up to turn a wrench.
"FuuuuuuÇk!"
Said kid realizes,
First part to uninstall, is said Tool Tray.

All kidding aside, I'm not knocking.
Aesthetics are opinions.

GrimmSpeed · 04-10-2014, 10:45 AM

Quote:

Originally Posted by trd_kid

even if it doesn't have a tool tray I think something like this :

in something other than cf would be great!

I have a background in carbon, so I can say with confidence that PS:JDM did a damn good job on those pieces. Making something similar out of metal would require some extremely complex and expensive stamping. Now, I'm sure that you probably don't mean that you want something that contains all the contours and everything. Thanks for the suggestion, it might be something that we look into again.

Quote:

Originally Posted by azngolfur

Best... mod... ever. After install, going straight to Chipotle.

Technically it should be some of my most delicious research and development yet

Quote:

Originally Posted by major quicknap

lol

May I also suggest "Sergeant MiniComa"

Floggin Tires I can't seem to quote your post, that definitely will happen if you're removing your AC, Alternator, inlet tube from the throttle body, or throttle body. So I think other than those few operations, it's still very functional

Chase
Engineering

Struckbylitenin · 04-10-2014, 11:55 AM

"lol wut?"
http://www.infamousperformance.net/s...-S-2.0L/Detail

GrimmSpeed · 04-10-2014, 12:32 PM

Quote:

Originally Posted by Struckbylitenin

"lol wut?"
http://www.infamousperformance.net/s...-S-2.0L/Detail

Well, that certainly is interesting... That's our WRX/Legacy/Forester alternator cover, on a page selling BRZ radiator hoses? Definitely a "lol wut?" if you ask me...

I snapped some more pictures with our red Strut Bar, and added them to the first post. But if you hate scrolling as much as I do, here you go:

Chase
Engineering

husker741 · 04-10-2014, 12:37 PM

I don't have any idea why it wouldn't, but does anyone know if this will fit with my Perrin inlet hose?

TwinturboCamry · 04-10-2014, 05:33 PM

You you do a stock dyno run and then one with it on?

Thanks

GrimmSpeed · 04-11-2014, 11:01 AM

Quote:

Originally Posted by husker741

I don't have any idea why it wouldn't, but does anyone know if this will fit with my Perrin inlet hose?

It'll fit no problem

I see you joined the groupbuy yesterday!

Quote:

Originally Posted by TwinturboCamry

You you do a stock dyno run and then one with it on?

Thanks

Definitely not... But if you do one, and show a gain feel free to post it up! :P

Chase
Engineering

White64Goat · 04-11-2014, 11:12 AM

Quote:

Originally Posted by TwinturboCamry

You you do a stock dyno run and then one with it on?

Thanks

Name: sarcasm shirt.jpg
Views: 623
Size: 11.1 KB

calmtigers · 04-11-2014, 04:08 PM

Just a quick question, will a catch can fit with this installed? I'm a bit uninformed on complete install spots for the catch cans but I saw one was near the spot this was being installed

04-10-2014, 12:09 AM	#34
Floggin Tires Senior Member Join Date: Jun 2012 Drives: ZC6, Junk of ALL sorts Location: Ohio Posts: 516 Thanks: 111 Thanked 288 Times in 171 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Fictitious Story of a Kid Installs Pulley Cover/Tool Tray. "looks clean, seems functional" Said kid sets up to turn a wrench. "FuuuuuuÇk!" Said kid realizes, First part to uninstall, is said Tool Tray. All kidding aside, I'm not knocking. Aesthetics are opinions. __________________ # 1. Always know where your towel is. ZC6-CBS, is home

04-11-2014, 04:08 PM	#42
calmtigers Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout TRD FR-S 6MT Location: Fresno / DTLA Posts: 928 Thanks: 628 Thanked 376 Times in 214 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Just a quick question, will a catch can fit with this installed? I'm a bit uninformed on complete install spots for the catch cans but I saw one was near the spot this was being installed __________________ "I love dinosaurs so much that I’ve based my life on burning as much black melted dinosaur flesh as I can on a daily basis...even the screaming sound of prehistoric reptilians being burnt through any of the classic Japanese four cylinders gives me great joy."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GrimmSpeed Pulley Cover w/ Tool Tray - GROUP BUY	GrimmSpeed	Groupbuys	425	04-05-2016 05:49 PM
changing idler pulley from vortech, dust cover?	Sniper2606	Forced Induction	0	02-01-2014 04:02 PM
Pulley tool rental?	Asian Delight	Southern California	0	01-01-2014 01:37 AM
BLACK PERRIN PULLEY AND LIMITED GRIMMSPEED BATTERY TIE DOWN BRAND NEW IN BOX	genometuning	Engine, Exhaust, Bolt-Ons	0	09-26-2013 09:49 PM
NEOPLOT Crank pulley Alternator pulley& Waterpump pulley	ANREX	Engine, Exhaust, Transmission	10	10-25-2012 07:45 PM

04-09-2014, 04:56 AM	#29
jeepmor Senior Member Join Date: Apr 2014 Drives: 84 CJ7, 08 Duramax, 2014 FRS Location: Oregon Posts: 478 Thanks: 338 Thanked 128 Times in 103 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	What does each version weigh?

04-10-2014, 11:55 AM	#36
Struckbylitenin Senior Member Join Date: Aug 2013 Drives: 10 Series FR-S Location: S. Jerz / Philly Posts: 254 Thanks: 41 Thanked 121 Times in 67 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	"lol wut?" http://www.infamousperformance.net/s...-S-2.0L/Detail

04-10-2014, 12:37 PM	#38
husker741 Banned Join Date: Feb 2013 Drives: 2013 Whiteout Scion FR-S 6MT Location: Gainesville, FL Posts: 3,272 Thanks: 1,278 Thanked 4,183 Times in 1,415 Posts Mentioned: 28 Post(s) Tagged: 2 Thread(s)	I don't have any idea why it wouldn't, but does anyone know if this will fit with my Perrin inlet hose?

04-10-2014, 05:33 PM	#39
TwinturboCamry Banned Join Date: Oct 2013 Drives: 4 wheels Location: Canada Posts: 122 Thanks: 7 Thanked 162 Times in 45 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	You you do a stock dyno run and then one with it on? Thanks

User Name		Remember Me?
Password