Jackson Racing Supercharger Owners Thread - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Howardwei · 03-14-2014, 09:13 AM

For me. I notice the BRZ front bumper already come with a little gap. so that looks just a tad bit popped out to me. I am getting my kit soon and would like to know if the piping in front would cause an issue like the one you posted. Does anybody here have that problem with alignment after the SC installation on the bumper?

4032pauln · 03-14-2014, 09:45 AM

I had this problem too when i first installed the kit, i played around with the inter cooler piping and fixed the clearance between the right piping and the bumper. The intercooler elbow by the driver side headlight was the main issue for me.

*LongFella · 03-14-2014, 10:01 AM

I'm assuming this is for the BRZ, right?

I didn't have any bumper alignment/readjusting to do during install on my FRS.

4032pauln · 03-14-2014, 10:46 AM

Correct, the key is to take ur time. We spent less than 5 hrs to install the whole kit and did not put the piping together correctly

*LongFella · 03-14-2014, 11:08 AM

@Jackson Racing

For all of us CA91 lovers, are there any plans to have a non-CARB CA91 tune we can us that you guys push out for the kit?

I want Moooo POWWWAAAA!!!!

sklimo · 03-14-2014, 11:51 AM

Quote:

Originally Posted by Howardwei

For me. I notice the BRZ front bumper already come with a little gap. so that looks just a tad bit popped out to me. I am getting my kit soon and would like to know if the piping in front would cause an issue like the one you posted. Does anybody here have that problem with alignment after the SC installation on the bumper?

My bumper doesn't fit perfect. Gotta play with intercooler piping more on drivers side

4032pauln · 03-14-2014, 12:47 PM

Ziptying the windshield fluid to the left may also help aligning the pipes

Quote:

Originally Posted by sklimo

My bumper doesn't fit perfect. Gotta play with intercooler piping more on drivers side

sklimo · 03-14-2014, 12:59 PM

Quote:

Originally Posted by 4032pauln

Ziptying the windshield fluid to the left may also help aligning the pipes

Thanks I'll try that

SuperDave · 03-14-2014, 07:12 PM

did you guys all have the kit professionally installed? did any of you have it installed at evasive?

*LongFella · 03-14-2014, 07:23 PM

Quote:

Originally Posted by SuperDave

did you guys all have the kit professionally installed? did any of you have it installed at evasive?

I did my own. I believe most of us did...

enivid · 03-14-2014, 07:24 PM

Quote:

Originally Posted by SuperDave

did you guys all have the kit professionally installed? did any of you have it installed at evasive?

I don't know anyone who did it at evasive. A lot of us did it ourselves nice it's the easiest FI kit ever.

Sent from my Nexus 5 using Tapatalk

SuperDave · 03-14-2014, 08:00 PM

i guess i'd rather not have the fitment issues that some of the guys are experiencing, if i have it done by a shop, hopefully i can avoid that. still on the fence about FI but if i were to, this is probably the kit i would use.

*LongFella · 03-14-2014, 08:08 PM

Quote:

Originally Posted by SuperDave

i guess i'd rather not have the fitment issues that some of the guys are experiencing, if i have it done by a shop, hopefully i can avoid that. still on the fence about FI but if i were to, this is probably the kit i would use.

Fitment issues?

SuperDave · 03-14-2014, 08:27 PM

Quote:

Originally Posted by *LongFella

Fitment issues?

with the bumpers on BRZs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jackson Racing Rotrex Supercharger System Info and Discussion	Jackson Racing	Forced Induction	827	04-06-2020 04:56 PM
Jackson Racing Supercharger Press Release and Info	CounterSpace Garage	Forced Induction	110	01-03-2017 09:04 PM
jackson Racing engine oil cooler - modular to fit the Jackson Racing Supercharger!	CSG Mike	Forced Induction	24	04-27-2016 12:59 PM
Jackson Racing supercharger	NoppyNop	Forced Induction	241	06-26-2014 03:05 PM
Jackson Racing Supercharger Pre-Order Sale, $200 off!	Xero-Limit	Forced Induction	2	03-05-2014 04:14 PM

03-14-2014, 09:13 AM	#43
Howardwei Senior Member Join Date: Jun 2013 Drives: BRZ Location: Houston Posts: 165 Thanks: 17 Thanked 9 Times in 9 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	For me. I notice the BRZ front bumper already come with a little gap. so that looks just a tad bit popped out to me. I am getting my kit soon and would like to know if the piping in front would cause an issue like the one you posted. Does anybody here have that problem with alignment after the SC installation on the bumper?

03-14-2014, 09:45 AM	#44
4032pauln Member Join Date: Sep 2012 Drives: lexus Location: west palm beach Posts: 61 Thanks: 5 Thanked 31 Times in 21 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I had this problem too when i first installed the kit, i played around with the inter cooler piping and fixed the clearance between the right piping and the bumper. The intercooler elbow by the driver side headlight was the main issue for me.

03-14-2014, 10:46 AM	#46
4032pauln Member Join Date: Sep 2012 Drives: lexus Location: west palm beach Posts: 61 Thanks: 5 Thanked 31 Times in 21 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Correct, the key is to take ur time. We spent less than 5 hrs to install the whole kit and did not put the piping together correctly

User Name		Remember Me?
Password