BRZ Ts parts - Page 175 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SPCorBUST · 10-24-2017, 07:48 PM

Quote:

Originally Posted by Mr.Impreza

Good to know. I prefer to keep close to stock weight/slightly heavier shift knob.
Main reason why I didn't like the TRD option since it was lighter & the weird design didn't win me over. Overall it seems like I don't like anything TRD on this car apart from the spoiler >__<

Yeah, I'm going to just go with the stock oil filter also since the STI one seems over-priced just like the TRD one.

Yeah, I don't want to get too deep into modifications. I'm pretty much complete with my car once I place the order on all the STI parts I want in November

(Apart from the Fujitsubo Header and some minor cosmetic mods)

I won't even order the Draw Stiffeners since the car already handles perfectly for me and I don't find it necessary.
I already can take corners and highway on-ramps faster than I ever could in my WRX STI with coilovers and a lot more hp haha.

STI steering wheel is a nice upgrade. Nicer material and not too much thicker.

STI shift knob has perfect weight IMO, better than the Raceseng or other too large or too heavy shift knobs.

You might like the TRD trunk aero piece as well as the quick shifter and door latches. Those are nice subtle pieces... At least I enjoy them. 👍

Sent from my SM-G925T using Tapatalk

krayzie · 10-24-2017, 09:31 PM

Quote:

Originally Posted by nikitopo

Do you remember how much caster do you have with the bilsteins? Is it within the factory limits or do you have a much larger positive angle? Not directly relevant with the stiffeners, but it is another way to improve the weak points of the MacPherson setups. A bigger positive angle can improve the actual (dynamic) camber while cornering.

Yea I've always just go for as much caster as possible. 5.8 degrees with my BRZ right now and that's as much as it'll go.

I'm pretty sure my old Mk.5 Golf GTI had caster angle in the high 6 degrees range. I've once read that's an usual German car trait for high speed stability feel with the steering.

nikitopo · 10-25-2017, 01:04 AM

Quote:

Originally Posted by krayzie

Yea I've always just go for as much caster as possible. 5.8 degrees with my BRZ right now and that's as much as it'll go.

I'm pretty sure my old Mk.5 Golf GTI had caster angle in the high 6 degrees range. I've once read that's an usual German car trait for high speed stability feel with the steering.

I have 6.12 degrees with OEM top hats and Sachs coilovers. It looks that Sachs tried to get as much as possible with their product. Overall, they are quite aggressive in Germany and trying to compete with Bilstein. I believe it is one of the reasons new tS US and tS JDM will go with a Sachs suspension.

Here are the advantages of more positive caster:
- Increased dynamic negative camber in turns
- Improved high speed stability
- Improved road feel, steering feedback and sensitivity
- Increased steering weight
- Improved steering turn-in response during corner entry

krayzie · 10-25-2017, 01:47 AM

I forgot to mention that with the stock shocks my caster was only 5.4 degrees max.

DSOmegaX · 12-11-2017, 02:48 AM

Interesting tidbit: the Vbars are painted black for the USDM tS. Looks like they are trying their best to avoid any STi branding on the car

Veloist · 12-11-2017, 03:10 AM

Quote:

Originally Posted by DSOmegaX

Interesting tidbit: the Vbars are painted black for the USDM tS. Looks like they are trying their best to avoid any STi branding on the car

I noticed that too but I don’t think they’re avoiding STI branding, especially when the wing end plates have STI on it, the Gauge cluster has the STI logo on it, the 4.2 inch multi function display will start-up with the STI logo, wheel caps etc. etc.

Cheve · 02-12-2018, 03:59 PM

Quote:

Originally Posted by DSOmegaX

tS badge in front for the US version.

Is it possible to get the covers for the holes left and right of the grille separately?

switchlanez · 02-13-2018, 03:45 PM

Got part numbers for the front/rear cherry blossom red accents.

Front Bumper Molding: J1210CA301
Rear Bumper Stripe: J1210CA401

Cheapest prices I found were $195.05 for front, $118.83 for rear:
https://www.subarugenuineparts.com/o...ing-j1210ca301
https://www.subarugenuineparts.com/o...per-j1210ca401

Drambeenie · 02-13-2018, 03:57 PM

Quote:

Originally Posted by switchlanez

Got part numbers for the front/rear cherry blossom red accents.

Front Bumper Molding: J1210CA301

Cheapest prices I found were $195.05 for front, $118.83 for rear:
https://www.subarugenuineparts.com/o...ing-j1210ca301

spike021 · 02-13-2018, 04:02 PM

Quote:

Originally Posted by switchlanez

Got part numbers for the front/rear cherry blossom red accents.

Front Bumper Molding: J1210CA301
Rear Bumper Stripe: J1210CA401

Cheapest prices I found were $195.05 for front, $118.83 for rear:
https://www.subarugenuineparts.com/o...ing-j1210ca301
https://www.subarugenuineparts.com/o...per-j1210ca401

I want.. but.. so expensive just for those lol.

JonRZ · 02-13-2018, 04:12 PM

Quote:

Originally Posted by switchlanez

Got part numbers for the front/rear cherry blossom red accents.

Front Bumper Molding: J1210CA301
Rear Bumper Stripe: J1210CA401

Cheapest prices I found were $195.05 for front, $118.83 for rear:
https://www.subarugenuineparts.com/o...ing-j1210ca301
https://www.subarugenuineparts.com/o...per-j1210ca401

THANK YOU. Ordering. Why? Because wannabe STI. Now I need the wheels and we'll pretty much be all set. Was going to Japanparts them but shipping may be quite a bit cheaper if I can order through US.

Edit: This was sent to me after I placed the order:
Please note that your items are out of stock and on special order currently from Subaru. Subaru is filling this order from our local distribution warehouse one state away. SUPER LOW SUPPLY! 4 OF EACH LEFT NATIONWIDE

We will put a rush on this for you.
Estimated arrival date to our warehouse/ship date: 1-2 Business days

We will update you once the order has been fulfilled
Please contact us should you have any questions.

kuczynskika · 02-13-2018, 04:14 PM

Quote:

Originally Posted by switchlanez

Got part numbers for the front/rear cherry blossom red accents.

Front Bumper Molding: J1210CA301
Rear Bumper Stripe: J1210CA401

Cheapest prices I found were $195.05 for front, $118.83 for rear:
https://www.subarugenuineparts.com/o...ing-j1210ca301
https://www.subarugenuineparts.com/o...per-j1210ca401

Sold!!! Thanks for this!

Sent from my iPhone using Tapatalk

weederr33 · 02-13-2018, 06:48 PM

Those black STI v bars look like stock braces with a simple rubber sleeve on them. Is there anything actually different?

kuczynskika · 02-13-2018, 06:49 PM

Quote:

Originally Posted by weederr33

Those black STI v bars look like stock braces with a simple rubber sleeve on them. Is there anything actually different?

They got a ball joint for some flex... yay...

Sent from my iPhone using Tapatalk

12-11-2017, 02:48 AM	#2441
DSOmegaX Senior Member Join Date: Jul 2012 Drives: '19 M2 Comp, '20 GR Supra Location: Irvine, CA Posts: 1,904 Thanks: 109 Thanked 2,153 Times in 986 Posts Mentioned: 51 Post(s) Tagged: 3 Thread(s)	Interesting tidbit: the Vbars are painted black for the USDM tS. Looks like they are trying their best to avoid any STi branding on the car __________________ @dsomegax.cars 2013 Subaru BRZ Limited \| WRB \| STI tS Build Thread [SOLD] 2019 BMW M2 Competition \| LBB \| ///M Performance Build Thread 2020 Toyota GR Supra \| Turbulence \| TRD \| Build Thread

02-13-2018, 03:45 PM	#2444
switchlanez Glorious BRZ Master Race Join Date: Apr 2011 Drives: Subaru Libird Location: Race Wars Posts: 3,645 Thanks: 1,050 Thanked 2,718 Times in 1,079 Posts Mentioned: 110 Post(s) Tagged: 0 Thread(s)	Got part numbers for the front/rear cherry blossom red accents. Front Bumper Molding: J1210CA301 Rear Bumper Stripe: J1210CA401 Cheapest prices I found were $195.05 for front, $118.83 for rear: https://www.subarugenuineparts.com/o...ing-j1210ca301 https://www.subarugenuineparts.com/o...per-j1210ca401 __________________ << BUILD THREAD >>

02-13-2018, 06:48 PM	#2449
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Those black STI v bars look like stock braces with a simple rubber sleeve on them. Is there anything actually different? __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Parts for my FR-S	hyperpunx	Interior Parts (Incl. Lighting)	1	03-05-2013 05:28 PM
[Group Deals] SoCal Subaru BRZ parts or Any Parts	Giccin	Southern California	25	08-26-2012 10:30 AM

10-25-2017, 01:47 AM	#2440
krayzie Drive From Home Join Date: Dec 2013 Drives: BRZ STI Performance Location: Filth City Posts: 4,914 Thanks: 2,368 Thanked 3,111 Times in 2,007 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	I forgot to mention that with the stock shocks my caster was only 5.4 degrees max.

User Name		Remember Me?
Password