Undertray Bolts Part #'s and/or sizes

[smbstyle]

So I noticed the shop that installed my RevWorks UEL header decided they'd reinstall the undertray with only ONE freaking bolt; I'm missing 11 of the 12 bolts for the metal undertray (but still have the plastic push-pin style clips).

Does anyone know the part # for these bolts, if they sell them as a OEM hardware kit, or the sizes and counts for each type of bolt? (I think there are 2 or 3 different sizes)

[Koa]

Originally Posted by smbstyle

So I noticed the shop that installed my RevWorks UEL header decided they'd reinstall the undertray with only ONE freaking bolt; I'm missing 11 of the 12 bolts for the metal undertray (but still have the plastic push-pin style clips).

Does anyone know the part # for these bolts, if they sell them as a OEM hardware kit, or the sizes and counts for each type of bolt? (I think there are 2 or 3 different sizes)

Did you bring this to your shop's attention?

sorry to not answer your question but that's the question I think a lot of us will have

[smbstyle]

Originally Posted by Koa

Did you bring this to your shop's attention?

sorry to not answer your question but that's the question I think a lot of us will have

Yes.

[Roadcone]

step 1 return to shop. step 2 demand your bolts back.

[WOODNUTS_86]

HEY THERE I WORK IN A PARTS DEPARTMENT AT TOYOTA IN CANADA IF YOU COULD SEND ME A PIC I COULD LOOK INTO A PART # FOR YOU.. ISSUE IS CANADA'S PART NUMBERS MAY BE DIFFERENT THAN AMERICAN NUMBERS

[smbstyle]

Boy ya'll sure are helpful. They don't have the bolts. The purpose of this thread wasn't to find out how to ask a shop for bolts, I'm asking for part numbers and/or sizes.

Now, moving on....

[Koa]

Originally Posted by smbstyle

Boy ya'll sure are helpful. They don't have the bolts. The purpose of this thread wasn't to find out how to ask a shop for bolts, I'm asking for part numbers and/or sizes.

Now, moving on....

Why don't you ask them to furnish you bolts?

I'd be pretty furious. If they fucked up that hardcore installing your cover, imagine what they did while installing the header.

Now... onto teaching you how to use parts catalogs.

Try and find your bolt here man.

Should be #28 or #29. We may be helpful, but typically not to people who are being lazy

http://www.subarupartsamerica.com/pa...ODY%20HARDWARE

[smbstyle]

So for anyone interested, here are the part #s:


901000413 Qty: 8 Flange bolt M8x16
010006167 Qty: 4 Flange bolt-pilot

[smbstyle]

Originally Posted by Koa

Why don't you ask them to furnish you bolts?

I'd be pretty furious. If they fucked up that hardcore installing your cover, imagine what they did while installing the header.

Now... onto teaching you how to use parts catalogs.

Try and find your bolt here man.

Should be #28 or #29. We may be helpful, but typically not to people who are being lazy

http://www.subarupartsamerica.com/pa...ODY%20HARDWARE

I did, they don't have them, which is why I was trying to locate the bolt part #'s on here.

Never used that site, thanks for the help. Not sure how asking for help on the forum is being lazy, as I already did a cursory search and couldn't find them? Ended up with a friend who's a service manager tracking them down.

[Koa]

Apologize for coming off crass- parts catalogs have saved my ass a handful of times. Service dept friends even moreso!

[kchar]

Well I don't know the part numbers but I know that there are 4 smaller bolts which go on the rear side of the tray and the rest are the same size. I want to say the bigger bolts are 14mm and the smaller are 12mm. I'm sure someone on here could verify.

Also there's 3 big pop clips on each side in the middle section of the tray. There are a handful more areas for the big pop clips ( <5 ) and a couple for the small pop clips. If you just by a bunch you'll be able to figure it out by trial and error cause that's what I have to do every time I'm putting it back on ha

[smbstyle]

Originally Posted by kchar

Well I don't know the part numbers but I know that there are 4 smaller bolts which go on the rear side of the tray and the rest are the same size. I want to say the bigger bolts are 14mm and the smaller are 12mm. I'm sure someone on here could verify.

Also there's 3 big pop clips on each side in the middle section of the tray. There are a handful more areas for the big pop clips ( <5 ) and a couple for the small pop clips. If you just by a bunch you'll be able to figure it out by trial and error cause that's what I have to do every time I'm putting it back on ha

Thanks, yeah the pop clips look to be present.

I believe these bolts 010006167 (qty: 4) are the ones along the rear side of the tray that connects the panel underneath the trans with the vent.

[kinchu007]

Originally Posted by smbstyle

So for anyone interested, here are the part #s:


901000413 Qty: 8 Flange bolt M8x16
010006167 Qty: 4 Flange bolt-pilot

THANK YOU!!