Stoptech Front 328x28 - Minimum spacer size with OEM wheels ? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

asnatlas · 06-07-2016, 10:38 AM

Quote:

Originally Posted by F1point4

OEM Wheel
17x7 ET48: http://www.ft86club.com/forums/showp...39&postcount=3

Stoptech Front 328x28 ST40M Kit

20121012-86OEMWheelBBKTemplates-4 by VictorN07, on Flickr

Anyone know minimum spacer size needed for the Stoptech Front 328x28 ST40M Kit with OEM wheels ?

Sleepless · 06-07-2016, 12:28 PM

I believe it is 10mm.

BTW - When I did the math to convert to longer wheel studs and the cost of the spacers, it added up to close to the cost of 4 excellent new wheels with the correct offset. So, I just got the wheels.

mav1178 · 06-07-2016, 01:58 PM

The spacer you need exceeds what you can safely use on the stock studs, if it answers your question.

So you're stuck between choosing 5-10mm w/ extended studs, or 15mm bolt-on, or proper wheels.

-alex

asnatlas · 06-07-2016, 02:18 PM

The reason I am asking is because I have two sets of OEMs wheels that I was planning on using for track and AutoX. If I just need 5-10mm spacers on the front I should be able to get away with the Ichiba Version 1 Wheel Spacers for like $95-ish ??

They also have the Ichiba Version 2 Wheel Spacers in 15mm...

I already have 18s, but wanted to be able to use both sets of OEMs wheels for Track / autoX with the Stoptech Front 328x28 ST40M Kit up front...

continuecrushing · 06-07-2016, 02:20 PM

Quote:

Originally Posted by Sleepless

I believe it is 10mm.

BTW - When I did the math to convert to longer wheel studs and the cost of the spacers, it added up to close to the cost of 4 excellent new wheels with the correct offset. So, I just got the wheels.

this is a big one, I did the same thing a while back and was like well this just won't be worth it so I just got the right stuff (new wheels lol) from the get go.

mav1178 · 06-07-2016, 06:14 PM

Quote:

Originally Posted by asnatlas

The reason I am asking is because I have two sets of OEMs wheels that I was planning on using for track and AutoX. If I just need 5-10mm spacers on the front I should be able to get away with the Ichiba Version 1 Wheel Spacers for like $95-ish ??

Wheels with proper BBK clearance > slip-on spacers with long studs > bolt-on spacers

That is the preference.

For track, 9 out of 10 groups won't even let you run on track with a spacer.

-alex

Sportsguy83 · 06-14-2016, 03:03 PM

I am currently running stock wheels with this BBK. I got a 12 mm spacer to make sure they fit, and I am pretty sure the minimum has to be less than 10mm. There is plenty of space with the 12 mm spacer. Now, I cannot tell if it'll be good enough with 5mm....

asnatlas · 06-14-2016, 03:16 PM

Quote:

Originally Posted by Sportsguy83

I am currently running stock wheels with this BBK. I got a 12 mm spacer to make sure they fit, and I am pretty sure the minimum has to be less than 10mm. There is plenty of space with the 12 mm spacer. Now, I cannot tell if it'll be good enough with 5mm....

I printed out the Stoptech BBK wheel fitment template (ST-40 - 328x28) and I am going to check it with 5mm to see if it will work. I will post pics when I do that...

ein86 · 01-13-2017, 11:38 PM

Random bump.. I just installed mine and tried the stock wheel with a 5mm spacer, does not work, the edge of the caliper closest to the hub hits the spokes. 10mm works like a champ...

06-07-2016, 12:28 PM	#2
Sleepless Senior Member Join Date: Apr 2014 Drives: 2014 BRZ Location: Redmond, WA Posts: 639 Thanks: 299 Thanked 392 Times in 229 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	I believe it is 10mm. BTW - When I did the math to convert to longer wheel studs and the cost of the spacers, it added up to close to the cost of 4 excellent new wheels with the correct offset. So, I just got the wheels. __________________ Pete 14 Track BRZ (Build Thread) cmslaptimer.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Spacer Size??	tonytduc	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	52	11-03-2018 03:36 AM
StopTech Big Brake Kit 328x28 Weights and Pics :)	FT-86 SpeedFactory	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	40	11-21-2016 08:55 PM
Sold: Stoptech 328x28 BBK	industrial	Brakes, Suspension, Chassis	9	06-28-2016 08:41 PM
FS: NC Stoptech 328x28 ST40 BBK - Silver/Slotted - Brand new in Box	KNS Brakes	Brakes, Suspension, Chassis	3	02-21-2015 12:50 PM

06-07-2016, 01:58 PM	#3
mav1178 Senior Member Join Date: Apr 2013 Drives: 2005 Toyota Camry Location: 91745 Posts: 6,562 Thanks: 493 Thanked 6,093 Times in 3,029 Posts Mentioned: 95 Post(s) Tagged: 3 Thread(s)	The spacer you need exceeds what you can safely use on the stock studs, if it answers your question. So you're stuck between choosing 5-10mm w/ extended studs, or 15mm bolt-on, or proper wheels. -alex

06-07-2016, 02:18 PM	#4
asnatlas Senior Member Join Date: Sep 2015 Drives: 2013 - BRZ - SWP Location: Grove City, Ohio Posts: 159 Thanks: 27 Thanked 24 Times in 20 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	The reason I am asking is because I have two sets of OEMs wheels that I was planning on using for track and AutoX. If I just need 5-10mm spacers on the front I should be able to get away with the Ichiba Version 1 Wheel Spacers for like $95-ish ?? They also have the Ichiba Version 2 Wheel Spacers in 15mm... I already have 18s, but wanted to be able to use both sets of OEMs wheels for Track / autoX with the Stoptech Front 328x28 ST40M Kit up front...

01-13-2017, 11:38 PM	#9
ein86 I hit cones. Join Date: Jan 2014 Drives: 2015 FRS Location: SC Posts: 16 Thanks: 0 Thanked 19 Times in 9 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Random bump.. I just installed mine and tried the stock wheel with a 5mm spacer, does not work, the edge of the caliper closest to the hub hits the spokes. 10mm works like a champ...

User Name		Remember Me?
Password