J2 exhaust, quad tip...my newest addition - Page 16 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AAghassi · 09-29-2013, 02:53 PM

Quote:

Originally Posted by fmsida

It's not so much the material, but the welding. It depends what processes they are using to weld.. by hand or machine. If it's coming from overseas, then the material itself can be questionable as there are a lot types of stainless steel.
@t88supra , how did the welds look like? Good craftsmanship?

I messaged one of the vendors selling this exhaust on eBay and asked them if they would give me a discount if I did local pick up since I would be saving them eBay fees and shipping costs. They told me they would and gave me their address. When I went to their warehouse I saw that their sign said DNAMotorsports / J2 so I asked the guy at the front desk if J2 is also based out of their warehouse and he said they are. I asked them if their welds are done by hand or machine and he kind of hesitantly responded "robotics".

fx35s · 09-29-2013, 09:01 PM

OP,

What wheel are you using?

It kind of seemed like you're on 18" Gramslight 57Xtreme.

I am looking to get one for myself in the future... how heavy is it per wheel?

1slowfrs · 01-21-2014, 06:27 PM

Quote:

Originally Posted by AAghassi

I messaged one of the vendors selling this exhaust on eBay and asked them if they would give me a discount if I did local pick up since I would be saving them eBay fees and shipping costs. They told me they would and gave me their address. When I went to their warehouse I saw that their sign said DNAMotorsports / J2 so I asked the guy at the front desk if J2 is also based out of their warehouse and he said they are. I asked them if their welds are done by hand or machine and he kind of hesitantly responded "robotics".

can i get their contact information?

NorthPoleFRS · 01-29-2014, 10:49 PM

I know this post is a year old but how do y'all like this exhaust???

Sent from my iPad using Tapatalk

troek · 01-30-2014, 02:22 AM

i love mine, i get compliments all the time. if your on a budget, you will not be dissapointed. only thing is can say is, if your lowered more than 20 mm, the pipe that bends around the diff hangs a little low and my scrape from time to time.

NorthPoleFRS · 01-30-2014, 08:50 AM

Quote:

Originally Posted by troek

i love mine, i get compliments all the time. if your on a budget, you will not be dissapointed. only thing is can say is, if your lowered more than 20 mm, the pipe that bends around the diff hangs a little low and my scrape from time to time.

Not lowered at all. On a budget.

Looks like it's getting ordered!!!! Thanks a million!

Sent from my iPad using Tapatalk

Frs x3 · 01-30-2014, 11:56 AM

I've been listening to YouTube videos of the quad exhaust and love the sound. I'll probably be adding this to my to do list of modifications.

NorthPoleFRS · 02-04-2014, 05:33 PM

Should be here Friday!!

Sent from my iPad using Tapatalk

troek · 02-04-2014, 09:07 PM

If during install the muffler pushes into the heat shield, just get some longer rubber exhaust hangers

NorthPoleFRS · 02-07-2014, 08:46 AM

It will be delivered...today. Aka installed today as well

Sent from my iPad using Tapatalk

Vincenttam · 02-08-2014, 05:16 AM

Anyone installed this without a problem? I heard there was some bending required. Anyone enlighten me on this? Thinking of getting this exhaust and i have like negative experience on car installations.

NorthPoleFRS · 02-08-2014, 07:31 AM

Quote:

Originally Posted by Vincenttam

Anyone installed this without a problem? I heard there was some bending required. Anyone enlighten me on this? Thinking of getting this exhaust and i have like negative experience on car installations.

I'll let you know in a few hours how it goes.

Sent from my iPad using Tapatalk

Nm86 · 02-08-2014, 07:49 AM

Quote:

Originally Posted by Vincenttam

Anyone installed this without a problem? I heard there was some bending required. Anyone enlighten me on this? Thinking of getting this exhaust and i have like negative experience on car installations.

I installed mine about 6 months ago. It fits ok, was just a little too close for me, so I ran by an exhaust shop and they gave it a quick pull down, to get it away from the body just a little. They did not even charge me for it. It was that easy. Also the sound is amazing, I feel a little bad for my neighbors in the morning at 6am when I leave for work but every other time love it.

NorthPoleFRS · 02-08-2014, 07:40 PM

Quote:

Originally Posted by Vincenttam

Anyone installed this without a problem? I heard there was some bending required. Anyone enlighten me on this? Thinking of getting this exhaust and i have like negative experience on car installations.

Installed today, no issues at all, minus the stock exhaust hitting me in the head. All parts were in box, gaskets and bolts were out of package but they were accounted for.

All in all, it was a 4 beer job. Took 2 hours cause I'm an idiot but dammit it was installed the right way! Love the sound. Love the sound. Love the sound. Love the look. I'll post pics soon.

Sent from my iPad using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quad exhaust tips?	migle	Engine, Exhaust, Transmission	86	09-23-2020 11:45 PM
J2 Quad catback exhaust?	bcmakesiteasy	Engine, Exhaust, Transmission	22	06-01-2015 03:43 AM
TRD Style Quad exhaust	Nafe	AUSTRALIA	17	05-11-2013 02:13 AM
Quad Exhaust Lip?	Neekowahhhh	Scion FR-S / Toyota 86 GT86 General Forum	4	12-17-2012 08:49 PM
Stacked Quad Exhaust	quik1987	Engine, Exhaust, Transmission	43	08-16-2012 03:34 PM

09-29-2013, 09:01 PM	#212
fx35s Senior Member Join Date: May 2013 Drives: 2013 Subaru BRZ Location: NNJ Posts: 433 Thanks: 510 Thanked 117 Times in 92 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	OP, What wheel are you using? It kind of seemed like you're on 18" Gramslight 57Xtreme. I am looking to get one for myself in the future... how heavy is it per wheel?

01-29-2014, 10:49 PM	#214
NorthPoleFRS Member Join Date: Sep 2013 Drives: 2013 raven frs Location: North Pole, AK Posts: 39 Thanks: 29 Thanked 14 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I know this post is a year old but how do y'all like this exhaust??? Sent from my iPad using Tapatalk

01-30-2014, 11:56 AM	#217
Frs x3 Likes it in the rear Join Date: Apr 2013 Drives: RS 1.0 Location: San Antonio Posts: 226 Thanks: 94 Thanked 61 Times in 46 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I've been listening to YouTube videos of the quad exhaust and love the sound. I'll probably be adding this to my to do list of modifications.

02-04-2014, 05:33 PM	#218
NorthPoleFRS Member Join Date: Sep 2013 Drives: 2013 raven frs Location: North Pole, AK Posts: 39 Thanks: 29 Thanked 14 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Should be here Friday!! Sent from my iPad using Tapatalk

02-07-2014, 08:46 AM	#220
NorthPoleFRS Member Join Date: Sep 2013 Drives: 2013 raven frs Location: North Pole, AK Posts: 39 Thanks: 29 Thanked 14 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It will be delivered...today. Aka installed today as well Sent from my iPad using Tapatalk

02-08-2014, 05:16 AM	#221
Vincenttam WtsTofu Join Date: Sep 2013 Drives: Ultramarine fr-s Location: Los Angeles? Posts: 1,348 Thanks: 368 Thanked 575 Times in 336 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Anyone installed this without a problem? I heard there was some bending required. Anyone enlighten me on this? Thinking of getting this exhaust and i have like negative experience on car installations.

User Name		Remember Me?
Password