TRD Intake Temp Filter - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dino451 · 01-20-2015, 06:49 PM

I need to clean/oil my TRD intake filter with the K&N kit and want to let it thoroughly dry for 24 hours.

Is there a equivalent cotton/paper filter that will fit while it dries? It's my daily driver and can't be out of service while it dries.

Mikeez · 01-20-2015, 08:27 PM

WRONG SECTION
Please post it in issues / recall section next time!

To be honest, there is no filter that you could use unless you get any filter that are big and cut it to fit!

However, keep it in a hot room and you could use it in 12h!

WRONG SECTION

Thorpedo · 01-20-2015, 09:38 PM

Quote:

Originally Posted by Mikeez

WRONG SECTION
Please post it in issues / recall section next time!

To be honest, there is no filter that you could use unless you get any filter that are big and cut it to fit!

However, keep it in a hot room and you could use it in 12h!

WRONG SECTION

1: I would say your section suggestion is no better than here. Why should it go in the issues/recall? Rediculous.

2: You're not "being honest". THere is probably an equivalent paper filter out there somewhere.

3: A "hot room"? errrr no.

OP, I am unaware of any equivalent but someone may chime in. If I were you I would leave the filter by a fan overnight, perhaps near a heat source if you have one (fireplace/woodstove etc) but make sure it doesn't get too hot.

Slap it in in the morning before going to work.

Cheers

Teseo · 01-20-2015, 09:55 PM

Use a blower, ask youre wife to let it use. Everyone woman have one

swarb · 01-20-2015, 10:05 PM

And this is why you keep the stock one. Just use a hair dryer, er... blower.

JohnJuan · 01-20-2015, 10:29 PM

Quote:

Originally Posted by swarb

And this is why you keep the stock one. Just use a hair dryer, er... blower.

But OP has the TRD intake.

Several minutes of vicious Googling shows no match for the filter, which is Toyota part #PTR03-18132 according to this install PDF.

Maybe if you talk reallllly nice to your dealer's service counter, they can get you another one? here's a link to it on toyotaracing.com.

Dino451 · 01-20-2015, 11:16 PM

Quote:

Originally Posted by JohnJuan

But OP has the TRD intake.

Several minutes of vicious Googling shows no match for the filter, which is Toyota part #PTR03-18132 according to this install PDF.

Maybe if you talk reallllly nice to your dealer's service counter, they can get you another one? here's a link to it on toyotaracing.com.

Thanks!....I did find the part number before I posted and took that to Oreily's and they couldnt find anything. They said to just bring it in and they can help me find one that matches in a paper/cotton size.

Dino451 · 01-20-2015, 11:18 PM

Quote:

Originally Posted by swarb

And this is why you keep the stock one. Just use a hair dryer, er... blower.

The stock one is too small. I have the entire intake, not the drop in filter. I will try the "blower" method if I cant find one.

01-20-2015, 06:49 PM	#1
Dino451 Member Join Date: Aug 2013 Drives: Scion FRS/Whiteout/OEM spoiler Location: California Posts: 76 Thanks: 24 Thanked 18 Times in 13 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	TRD Intake Temp Filter I need to clean/oil my TRD intake filter with the K&N kit and want to let it thoroughly dry for 24 hours. Is there a equivalent cotton/paper filter that will fit while it dries? It's my daily driver and can't be out of service while it dries. __________________ Whiteout 2013 FRS/ OEM Spoiler/ Clear side markers/TRD Intake/ Shark fin antenna/Rex speed blue wide mirrors/DD fog lights/Grimmspeed Strut bar/

01-20-2015, 08:27 PM	#2
Mikeez Engineering Student Join Date: Jan 2014 Drives: Scion FR-S 2015 Location: Montreal Posts: 628 Thanks: 18 Thanked 49 Times in 46 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	WRONG SECTION Please post it in issues / recall section next time! To be honest, there is no filter that you could use unless you get any filter that are big and cut it to fit! However, keep it in a hot room and you could use it in 12h! WRONG SECTION __________________ There’s no time to stop for gas, we’re already late

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'14 FR-S OEM Air Intake System w/ K&N Filter and Zeta Performance Intake Tube	SoCalArgento	Engine, Exhaust, Bolt-Ons	4	02-06-2015 10:40 PM
Okada / Ignition Projects / Cusco / Megan / aFe Intake & Filter / Agency Power Intake	eauto	Engine, Exhaust, Bolt-Ons	299	10-15-2014 01:44 PM
.: GReddy Air Intake System · Increases intake airflow · 4 Layer filter :.	Speed Element	Engine, Exhaust, Bolt-Ons	14	05-20-2013 06:06 PM

01-20-2015, 09:55 PM	#4
Teseo Senior Member Join Date: Jun 2014 Drives: frs Location: Gunsai Posts: 4,877 Thanks: 7,146 Thanked 2,922 Times in 1,769 Posts Mentioned: 23 Post(s) Tagged: 2 Thread(s)	Use a blower, ask youre wife to let it use. Everyone woman have one

01-20-2015, 10:05 PM	#5
swarb Senior Member Join Date: Sep 2014 Drives: BRZ Location: Los Angeles Posts: 3,053 Thanks: 1,773 Thanked 2,451 Times in 1,271 Posts Mentioned: 79 Post(s) Tagged: 0 Thread(s)	And this is why you keep the stock one. Just use a hair dryer, er... blower.

User Name		Remember Me?
Password