LS2 swap by KAB Customs with Pure Automotive Motec - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

M1K3 · 04-25-2017, 07:17 AM

Quote:

Originally Posted by Sportsguy83

Looks great. High quality!!

David Thanks, it looks Sweet! If you don't mind and you have a chance could you take a pic of the oil drain side. Also is that the standard setup for the fittings on the Oil Pan itself for the remote oil filter? Thanks again, I think this is the pan I want to go with and I hope it will not interfere with the sway bar.

Sportsguy83 · 04-25-2017, 07:45 AM

Quote:

Originally Posted by M1K3

David Thanks, it looks Sweet! If you don't mind and you have a chance could you take a pic of the oil drain side. Also is that the standard setup for the fittings on the Oil Pan itself for the remote oil filter? Thanks again, I think this is the pan I want to go with and I hope it will not interfere with the sway bar.

Supposedly CXRacing mounts and their pan does not interfere with sway bar, this pan should work too. I don't have it with me anymore as I left it yesterday at the mechanic.

Yes those are the standard fittings.

Sportsguy83 · 04-25-2017, 07:45 AM

Quote:

Originally Posted by Zer0

Does the pan have trap door setup in it to keep the oil around the pickup tube supplied under cornering G forces? It looks good.

Yes

I thought I had taken a picture of them.

Zer0 · 04-25-2017, 09:22 AM

I didn't see a picture of that part of the pan. Thanks for the info.

Sportsguy83 · 04-25-2017, 02:06 PM

Quote:

Originally Posted by Zer0

I didn't see a picture of that part of the pan. Thanks for the info.

Yea I thought I had taken the picture but I didn't. Sorry good sir.

DustinS · 04-25-2017, 02:28 PM

Pan looks really good!

Sportsguy83 · 05-04-2017, 11:53 AM

About time...

[ame]http://www.youtube.com/watch?v=XsEOsUuyk1E[/ame]

DustinS · 05-04-2017, 11:55 AM

Quote:

Originally Posted by Sportsguy83

About time...

http://www.youtube.com/watch?XsEOsUuyk1E

Just taking me to Youtube front page.

Sportsguy83 · 05-04-2017, 11:55 AM

Quote:

Originally Posted by DustinS

Just taking me to Youtube front page.

Fixed

Sportsguy83 · 05-04-2017, 12:14 PM

On the first picture you can peek at the Sikky Oil pan already installed.

On the second picture,
One of the plug wires hits the header. Is it possible to remove the aluminum spark plug boot and that makes the spark plug cable to fit? Is the boot necessary for OEM cables but not needed for aftermarket cables? Any ideas @DustinS

Sportsguy83 · 05-04-2017, 12:19 PM

Quote:

Originally Posted by all4spl

I'm wondering if this is a better option
https://www.summitracing.com/parts/h...FUw2gQodjhkJ6w

You can either have 1 7/8 and 2.5" collector or 1 3/4 and 3" collector with possibly no fitment issues as we all know corvettes have little to no room.

I got the header you suggested and it allows more room to work around the steering column. Thanks for the suggestion!

DustinS · 05-04-2017, 12:29 PM

Are those factory spark cables?

Sportsguy83 · 05-04-2017, 12:43 PM

Quote:

Originally Posted by DustinS

Are those factory spark cables?

Yes, the aluminum spark plug boot is what pushes the wire out. So I assume with the Holley EFI wires, I can ditch the aluminum boot (the Holley EFI cable itself is the boot over the spark plug). Thanks for your help always!

all4spl · 05-04-2017, 12:57 PM

for shits and giggles, can you please mount the passanger side on the driver side and vice versa? I need pictures of both. I am thinking about doing these for the FRS but I'm also thinking about running them reversed for my turbo corvette.

04-25-2017, 02:28 PM	#118
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,538 Thanked 1,409 Times in 803 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Pan looks really good! __________________

05-04-2017, 12:29 PM	#124
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,538 Thanked 1,409 Times in 803 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Are those factory spark cables? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sportsguy's LS2 Swapped BRZ	Sportsguy83	Member's Car Journals	2969	08-20-2018 11:12 AM
FS: (Sold) Sportsguy ArmRest	kvnchu	Interior Parts (Incl. Lighting)	22	03-13-2014 02:40 PM
Sportsguy's AVO Turbo experience, the Good the Bad and the Ugly	Sportsguy83	Forced Induction	155	08-05-2013 06:17 PM
Motegi 126 customs	kioton32	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	6	06-26-2013 12:34 AM
FS: NY - Sportsguy Handcrafted Armrest	xxscaxx	Interior Parts (Incl. Lighting)	43	05-04-2013 05:30 PM

04-25-2017, 09:22 AM	#116
Zer0 Senior Member Join Date: Sep 2015 Drives: 2015 frs Location: Ca Posts: 511 Thanks: 426 Thanked 196 Times in 148 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I didn't see a picture of that part of the pan. Thanks for the info.

05-04-2017, 12:57 PM	#126
all4spl Senior Member Join Date: Mar 2016 Drives: 2013 FR-S Location: Chesapeake, VA Posts: 400 Thanks: 61 Thanked 78 Times in 60 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	for shits and giggles, can you please mount the passanger side on the driver side and vice versa? I need pictures of both. I am thinking about doing these for the FRS but I'm also thinking about running them reversed for my turbo corvette.

User Name		Remember Me?
Password