Camber plates to use with stock struts and RCE Yellows - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Keenercarguy · 11-26-2016, 12:21 AM

I'm looking for a camber plate solution that will work with my RCE Yellow springs and also not add any ride height in the front. I also don't want to spend like $600 on Raceseng CasCam plates... Are there any good options for me?
Thanks!

D_Thissen · 11-26-2016, 12:26 AM

Sub'd

ysr50guy · 11-26-2016, 12:54 AM

http://www.brz-parts.com/hvt-brz-camberplate.html

gramicci101 · 11-26-2016, 01:22 AM

RCE and Velox are both good options for less than Raceseng.

Keenercarguy · 11-26-2016, 02:17 AM

Quote:

Originally Posted by gramicci101

RCE and Velox are both good options for less than Raceseng.

But I'm pretty sure both raise the front ride height and since I'm on springs, and not coils, I can't compensate by adjusting the front height.

Ultramaroon · 11-26-2016, 02:54 AM

Quote:

Originally Posted by ysr50guy

http://www.brz-parts.com/hvt-brz-camberplate.html

Quote:

Originally Posted by Keenercarguy

But I'm pretty sure both raise the front ride height and since I'm on springs, and not coils, I can't compensate by adjusting the front height.

@ysr50guy is all over that shit.

Keenercarguy · 11-26-2016, 02:58 AM

Oh yeah I definitely saw those (thanks @ysr50guy), I'm just leaving the thread open for more viable options: if there are any. I'm disappointed nothing is in the $300 range that will work for us spring (poor) guys...

Ultramaroon · 11-26-2016, 03:03 AM

Quote:

Originally Posted by Keenercarguy

Oh yeah I definitely saw those (thanks @ysr50guy), I'm just leaving the thread open for more viable options: if there are any. I'm disappointed nothing is in the $300 range that will work for us spring (poor) guys...

I get your point but carving a cavity out of solid billet is way more expensive than cutting a flat plate. If there are alternatives, I bet they'll be about the same price.

gramicci101 · 11-26-2016, 10:56 AM

If you can get a set of hvt plates, go for it. They're no longer being made.

Also check the classified section.

Cole · 11-26-2016, 11:03 AM

i love mine

Keenercarguy · 11-26-2016, 02:35 PM

Quote:

Originally Posted by Cole

i love mine

Wow those are so cheap, actually almost scary cheap lol... But do they 4x4 the stock front shocks because like 0.8* of camber isn't worth it to me if they 4X4 the front.

Cole · 11-26-2016, 04:09 PM

Quote:

Originally Posted by Keenercarguy

Wow those are so cheap, actually almost scary cheap lol... But do they 4x4 the stock front shocks because like 0.8* of camber isn't worth it to me if they 4X4 the front.

Nope. They keep it the same, or might slightly lower the front. I'm using them with Tein S-Tech springs.

Edit: They also give about 1.5-2 degrees of camber. With my camber bolts and the top hats, I have -3*.

nikitopo · 11-26-2016, 05:02 PM

Quote:

Originally Posted by Keenercarguy

I'm looking for a camber plate solution that will work with my RCE Yellow springs and also not add any ride height in the front. I also don't want to spend like $600 on Raceseng CasCam plates... Are there any good options for me?
Thanks!

Are you tracking the car?

VerusEric · 11-26-2016, 06:14 PM

Quote:

Originally Posted by Keenercarguy

But I'm pretty sure both raise the front ride height and since I'm on springs, and not coils, I can't compensate by adjusting the front height.

Our top hats were designed directly around OEM CAD and do not alter ride height. That being said, due to OEM unit being rubber and having compliance where ours has none, it does appear to vary ever so slightly from this variance (3 or so mm it seems).

Thanks,
Eric

11-26-2016, 12:21 AM	#1
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	Camber plates to use with stock struts and RCE Yellows I'm looking for a camber plate solution that will work with my RCE Yellow springs and also not add any ride height in the front. I also don't want to spend like $600 on Raceseng CasCam plates... Are there any good options for me? Thanks! __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

11-26-2016, 12:26 AM	#2
D_Thissen Senior Member Join Date: Jan 2014 Drives: '13 Argento FR-S (Sold) Location: Ontario Posts: 2,126 Thanks: 3,209 Thanked 1,439 Times in 855 Posts Mentioned: 19 Post(s) Tagged: 2 Thread(s)	Sub'd __________________ My FR-S Build IG: dthissen

11-26-2016, 02:58 AM	#7
Keenercarguy Mountain Runner Join Date: Jan 2014 Drives: 2013 Subaru BRZ Limited 6MT Location: Boone, NC and Charlotte area NC Posts: 714 Thanks: 489 Thanked 142 Times in 105 Posts Mentioned: 8 Post(s) Tagged: 2 Thread(s)	Oh yeah I definitely saw those (thanks @ysr50guy), I'm just leaving the thread open for more viable options: if there are any. I'm disappointed nothing is in the $300 range that will work for us spring (poor) guys... __________________ 2013 BRZ 6MT Limited: "Quick as Hell, on a Budget" Build • Ceramic Coated Gruppe-S UEL/OP • Konig Hypergrams • RS4 200tw • Koni Yellows, Eibach Springs • Ferodo DS2500's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camber plates with stock struts	kbye	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	11	04-29-2016 01:37 AM
SOLD: Pre-assembled stock struts with RCE Yellows + Whiteline Com-C top mounts	ATL BRZ	Brakes, Suspension, Chassis	12	08-07-2014 09:23 PM
Front stock struts/bolts max camber Q..	OICU812	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	10-15-2013 04:45 PM
FS: RCE Yellows on stock struts (complete package)	sw20kosh	Brakes, Suspension, Chassis	6	07-02-2013 05:02 PM
RCE Yellows + Koni Yellows + Whiteline Camber Adjustment Bushings	raul	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	15	05-24-2013 08:33 AM

11-26-2016, 12:54 AM	#3
ysr50guy Member Join Date: May 2012 Drives: brz Location: CA Posts: 66 Thanks: 41 Thanked 31 Times in 12 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	http://www.brz-parts.com/hvt-brz-camberplate.html

11-26-2016, 01:22 AM	#4
gramicci101 Off Topic Join Date: Feb 2014 Drives: 2014 Subaru BRZ Limited Location: Vegas, baby! Posts: 4,610 Thanks: 2,369 Thanked 4,243 Times in 2,170 Posts Mentioned: 43 Post(s) Tagged: 3 Thread(s)	RCE and Velox are both good options for less than Raceseng.

11-26-2016, 10:56 AM	#9
gramicci101 Off Topic Join Date: Feb 2014 Drives: 2014 Subaru BRZ Limited Location: Vegas, baby! Posts: 4,610 Thanks: 2,369 Thanked 4,243 Times in 2,170 Posts Mentioned: 43 Post(s) Tagged: 3 Thread(s)	If you can get a set of hvt plates, go for it. They're no longer being made. Also check the classified section.

11-26-2016, 11:03 AM	#10
Cole Not a troll Join Date: Apr 2015 Drives: FR-S Location: Canada Posts: 5,104 Thanks: 8,237 Thanked 5,399 Times in 2,694 Posts Mentioned: 266 Post(s) Tagged: 4 Thread(s)	i love mine

User Name		Remember Me?
Password