TRD/STI Aluminium Carpet plates - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AL008 · 05-01-2013, 06:32 PM

I noticed on my brand new carpet mats that it was already fading a bit from my heel on the carpet.

I recently bought some of these TRD Carpet Aluminium mats, they are not Genuine TRD but the quality of these are on par with anything that TRD would have supplied, take my word for it.

The Plate itself is made of a pretty thick plate of Aluminium, about 0.4 inches and has a brushed finish on top.
The black dots you see are rubber anti-slip mounts that are removable, when bought in the box, they come separate and you just need to push it into the holes on the plate.

The TRD logo is identical to any TRD products I have bought in the past. I spent quite a while to find a quality company that stocked these and went through a few variations with some being not so good quality.

The plate I have is sitting on the carpet and it actually comes with screws you can screw into your carpet, but this thing weighs almost about 7-800g and on the back has the rubber mounts so it doesn't slide around for me and sits quite firmly.

I am selling these for $45 pickup in Brisbane or PM me for a shipping cost. They are quite good value for the amount of quality material you get.

Another High res shot with my newly installed LED footwell lights!

Ordered a few STI ones too for a mate with a WRX and I have one on my passenger side in a Toyota car. :P

Beyer Subaru · 05-01-2013, 06:45 PM

Schveet! Thanks for sharing. If you were local I'd prolly get one from you. Free Bump.

ZZT86 · 05-01-2013, 08:18 PM

Nice but 0.4" thick ? RU certain ?

AL008 · 05-01-2013, 08:28 PM

Quote:

Originally Posted by ZZT86

Nice but 0.4" thick ? RU certain ?

I'll have to measure it when I get home, but it is pretty thick. Maybe it measures the baseof the plate to the tip of the rubber mount top as being 0.4 inch but I will confirm.

ZZT86 · 05-01-2013, 08:32 PM

Hey, I'd be keen but raising the floor by 10mm worries me cos your foot will be in a different position to original. Let us know !

Tomo · 05-01-2013, 10:07 PM

interested.. can you check shipping to 2604 Canberra thx ?

Sutty · 05-02-2013, 03:01 AM

Quote:

Originally Posted by ZZT86

Hey, I'd be keen but raising the floor by 10mm worries me cos your foot will be in a different position to original. Let us know !

I bought one of these plates from Al on another forum, I just measured it, the metal plate is 4mm thick, the rubber buttons make it about 9.4mm thick.

ZZT86 · 05-02-2013, 07:32 AM

cheers Sutty !

AL008 · 05-28-2013, 06:39 AM

Bump. Still have some available.

Panman · 05-28-2013, 07:01 PM

Got one of these a couple of weeks ago from @AL008 - quality Item, I used Velcro dots to stick mine down which works for me - highly recommended.

Tenac · 06-05-2013, 04:56 AM

TRD plate received all good. Thanks AL008

AL008 · 07-02-2013, 12:20 AM

Still have some STI plates available.

nabe · 07-02-2013, 02:12 AM

Quote:

Originally Posted by AL008

Still have some STI plates available.

Anymore TRDs available?

AL008 · 07-02-2013, 09:38 PM

Quote:

Originally Posted by nabe

Anymore TRDs available?

Pmed.

05-01-2013, 06:32 PM	#1
AL008 Senior Member Join Date: Jun 2012 Drives: Celica 04 Location: Brisbane Posts: 112 Thanks: 33 Thanked 9 Times in 8 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	TRD/STI Aluminium Carpet plates I noticed on my brand new carpet mats that it was already fading a bit from my heel on the carpet. I recently bought some of these TRD Carpet Aluminium mats, they are not Genuine TRD but the quality of these are on par with anything that TRD would have supplied, take my word for it. The Plate itself is made of a pretty thick plate of Aluminium, about 0.4 inches and has a brushed finish on top. The black dots you see are rubber anti-slip mounts that are removable, when bought in the box, they come separate and you just need to push it into the holes on the plate. The TRD logo is identical to any TRD products I have bought in the past. I spent quite a while to find a quality company that stocked these and went through a few variations with some being not so good quality. The plate I have is sitting on the carpet and it actually comes with screws you can screw into your carpet, but this thing weighs almost about 7-800g and on the back has the rubber mounts so it doesn't slide around for me and sits quite firmly. I am selling these for $45 pickup in Brisbane or PM me for a shipping cost. They are quite good value for the amount of quality material you get. Another High res shot with my newly installed LED footwell lights! Ordered a few STI ones too for a mate with a WRX and I have one on my passenger side in a Toyota car. :P Last edited by AL008; 02-25-2014 at 05:36 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Grimmspeed 86 aluminium oil cap	jonnyboy	Australia Classifieds	1	03-22-2013 06:07 AM
FRS Carpet care	encity5	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	11	01-30-2013 10:04 PM
WTS : Carpet Trunk Mat	JohnATL	Interior Parts (Incl. Lighting)	4	10-17-2012 02:07 PM
CARPET STAINS	MidnightMonkey	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	1	06-28-2012 12:56 PM
CUSTOM PLATES OR REGUALR PLATES?	Koomoo	Scion FR-S / Toyota 86 GT86 General Forum	13	05-21-2012 09:38 PM

05-01-2013, 06:45 PM	#2
Beyer Subaru Senior Member Join Date: Sep 2012 Drives: 2013 BRZ SWP 6AT Ltd Location: Alexandria, VA. Posts: 1,607 Thanks: 859 Thanked 776 Times in 485 Posts Mentioned: 37 Post(s) Tagged: 1 Thread(s)	Schveet! Thanks for sharing. If you were local I'd prolly get one from you. Free Bump.

05-01-2013, 08:18 PM	#3
ZZT86 Senior Member Join Date: Jul 2012 Drives: BR86 Location: Location Posts: 841 Thanks: 310 Thanked 146 Times in 114 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Nice but 0.4" thick ? RU certain ?

05-01-2013, 08:32 PM	#5
ZZT86 Senior Member Join Date: Jul 2012 Drives: BR86 Location: Location Posts: 841 Thanks: 310 Thanked 146 Times in 114 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Hey, I'd be keen but raising the floor by 10mm worries me cos your foot will be in a different position to original. Let us know !

05-01-2013, 10:07 PM	#6
Tomo Junior Member Join Date: Nov 2012 Drives: 86 GTS Location: Canberra Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	interested.. can you check shipping to 2604 Canberra thx ?

05-02-2013, 07:32 AM	#8
ZZT86 Senior Member Join Date: Jul 2012 Drives: BR86 Location: Location Posts: 841 Thanks: 310 Thanked 146 Times in 114 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	cheers Sutty !

05-28-2013, 06:39 AM	#9
AL008 Senior Member Join Date: Jun 2012 Drives: Celica 04 Location: Brisbane Posts: 112 Thanks: 33 Thanked 9 Times in 8 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Bump. Still have some available.

05-28-2013, 07:01 PM	#10
Panman Senior Member Join Date: Jun 2012 Drives: 86 GTS Location: Brisbane Australia Posts: 706 Thanks: 141 Thanked 275 Times in 176 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Got one of these a couple of weeks ago from @AL008 - quality Item, I used Velcro dots to stick mine down which works for me - highly recommended.

06-05-2013, 04:56 AM	#11
Tenac Member Join Date: May 2013 Drives: 86GTS Location: Australia Posts: 13 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	TRD plate received all good. Thanks AL008

07-02-2013, 12:20 AM	#12
AL008 Senior Member Join Date: Jun 2012 Drives: Celica 04 Location: Brisbane Posts: 112 Thanks: 33 Thanked 9 Times in 8 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Still have some STI plates available.

User Name		Remember Me?
Password