DIY Rom tuning for exhaust pops and backfires W/ romraider

[Kicknwing]

it works pretty good but i would like it to do off throotle like my mini does

[Detroiter]

Originally Posted by Kicknwing

it works pretty good but i would like it to do off throotle like my mini does

A couple pages back we talk about how to do it off throttle. It's definitely far more practical in my opinion.

[Kicknwing]

Originally Posted by Detroiter

A couple pages back we talk about how to do it off throttle. It's definitely far more practical in my opinion.

my tables dont look like the ones in the pics....i cant seem to find a defination to fix it. i have a b01c file

[22mraustin]

Originally Posted by Kicknwing

my tables dont look like the ones in the pics....i cant seem to find a defination to fix it. i have a b01c file

I can't find the link, but someone posted up a link that has the def files you need, it's on the this thread somewhere lol


2013 Scion FR-S
Tennessee

[Mikyt3]

Perhaps a nooby question... but will it work with automatic cars? will there be a difference?

[rjgough95]

Originally Posted by Mikyt3

Perhaps a nooby question... but will it work with automatic cars? will there be a difference?

Yes it will when you switch it into manual. So it gives you somewhat of a control over when you want it running.

[Kicknwing]

Originally Posted by 22mraustin

I can't find the link, but someone posted up a link that has the def files you need, it's on the this thread somewhere lol


2013 Scion FR-S
Tennessee

Thanks, I found one that works

[eddieflyinv]

Originally Posted by WolF_RS

Definition file should match with the CAL, correct?
My CAL is: ZA1JD00C

Here are all 5 tables that were mentioned, along with the definition file I'm using.

Pretty sure no one helped you yet, I just quickly scanned through lol
You need different definition files to get the tables properly defined, if you scan back you will find a link I had to some, also if you search for waynos 'guide to dialing in your tune' thread, his definitions have the tables defined as well, but you have to make sure your tune is a B01C tune internally, I'm pretty sure all the oft ones are.
If you absolutely cannot get anything to work, (try the d00c wayno defs with oft tune first) pm me and I can hack a b01c to d00c for you and provide the definition with it

[eddieflyinv]

I'm like 99% sure waynos defs will work for oft d00c though, only had to hack an F00C ROM so far, and I'd check what the oft roms are myself but I'm not near my laptop or tablet

[Goosfraba121]

@Detroiter and @eddieflyinv any update on the tune files?



about to swap to this(from a couple pages ago) and was just curious if you guys made any changes for more backfire/flames or anything.. runnning JDL uel catless headers and catless frontpipe with N1 exhuast..if that helps ur thoughts on anything I should be changing.

[eddieflyinv]

Still haven't played with this in a while so as for now I have nothing to add

Sent from my SM-G950W using Tapatalk

[Goosfraba121]

Originally Posted by eddieflyinv

Someone pm'd me about not getting much pops with e85 before using these settings,
Not sure what the deal ended up being but my guess would be to use more initial enrichment when using e85 with the same ignition retard

I am running e85 and my question is - does more initial enrichment mean going up in numbers so from 1.2 to say 2.0 or going down in numbres from 1.2 to say .5(new to this whole thing)

just did a quick like 10minute drive around town with the new tune, sounds great but I am looking for more of a flame shooting backfire :P

[eddieflyinv]

More initial enrichment = higher number = longer pulse width = more fuel
Not 100% sure if that's what did it, but play around and have fun 👍

Sent from my SM-G950W using Tapatalk

[edwardleeaf]

Originally Posted by eddieflyinv

Pretty sure no one helped you yet, I just quickly scanned through lol
You need different definition files to get the tables properly defined, if you scan back you will find a link I had to some, also if you search for waynos 'guide to dialing in your tune' thread, his definitions have the tables defined as well, but you have to make sure your tune is a B01C tune internally, I'm pretty sure all the oft ones are.
If you absolutely cannot get anything to work, (try the d00c wayno defs with oft tune first) pm me and I can hack a b01c to d00c for you and provide the definition with it

Hey Eddie,

I followed wayno's guide and was able to fix a bunch of crazy numbers. However, I do not have two rows showing temperature, only one row. Any idea of how I can fix this?

http://imgur.com/HJycZq5