Innovate (Sprintex) Supercharger Owners Topic

[riboyster]

Originally Posted by walletsr

So my oil leak only happens during spirited driving. It comes out of the bottom of the turbine housing but above the black plate, if that makes sense. Is that sealed with a sealant? I don't see any bolts or anything holding it on.

People have reported the gearbox/screw gasket malfunctioning. Try opening the dipstick screw right after driving to relieve the gearbox pressure. Then screw it back on securely.

If the pressure can be in vacuum when the sc is cold, and in equilibrium when it's hot, then maybe it won't leak so much.

[Wise]

Is anyone running the 210 supercharger with the Tomei UEL header plus an overpipe, catted front pipe and Invidia Q300?

[Dream20b]

Originally Posted by riboyster

I'm on 92 octane. Wish we had e85 here
What happened to your old kit?

totally missed this. traded blowers (+cash on my end) with smudge and bought an intercooler.

[stockysnail]

Originally Posted by Wise

Is anyone running the 210 supercharger with the Tomei UEL header plus an overpipe, catted front pipe and Invidia Q300?

I have similar on my 210. I'm JDL uncatted UEL, Nameless catted front/over pipe with Invidia Q300. Why do you ask?

[Wise]

Originally Posted by stockysnail

I have similar on my 210. I'm JDL uncatted UEL, Nameless catted front/over pipe with Invidia Q300. Why do you ask?

Do you have any vids of sound or dyno sheets?

Looking at buying the 210 setup for my car and just doing some research.

[COO86L]

Originally Posted by Wise

Is anyone running the 210 supercharger with the Tomei UEL header plus an overpipe, catted front pipe and Invidia Q300?

I'm running a 210 with Tomei UEL and overpipe, stock front pipe and my own axle back which is just a straight pipe with a hot dog. It sounds like a small plane.

If I put the standard muffler back on, it sounds stock. Q300 should be a nice sound TBH

[stockysnail]

Originally Posted by Wise

Do you have any vids of sound or dyno sheets?

Looking at buying the 210 setup for my car and just doing some research.

Yes see my build thread. Link in my signature.

[camelflage]

anyone hollow out their cats?

[8686]

any one used WMI? at least to cool the screws

[stockysnail]

Originally Posted by 8686

any one used WMI? at least to cool the screws

@PitViper does

[PitViper]

Yes, and I hollowed my cats.

Sent from my LG-D950 using Tapatalk

[camelflage]

Originally Posted by PitViper

Yes, and I hollowed my cats.

Sent from my LG-D950 using Tapatalk

curious as to the noise level. whats the rest of your exhaust comprised of?

[PitViper]

Originally Posted by camelflage

curious as to the noise level. whats the rest of your exhaust comprised of?

Invidia q300, invidia resonated front pipe.

I think it sounds good. Its not insanely loud but it has a good tone. @stockysnail was there when i did a loud exhaust competition. He can give a better "out of car" rating. Ill see if I can get a sound clip. But for now;


At 3:15 and 6:00 minutes, i do a dive by at full rev. Cant really hear the exhaust over the supercharger, though. Im the 2nd red car in the line.

Sent from my LG-D950 using Tapatalk

[stockysnail]

Originally Posted by PitViper

Invidia q300, invidia resonated front pipe.

I think it sounds good. Its not insanely loud but it has a good tone. @stockysnail was there when i did a loud exhaust competition. He can give a better "out of car" rating. Ill see if I can get a sound clip. But for now;


At 3:15 and 6:00 minutes, i do a dive by at full rev. Cant really hear the exhaust over the supercharger, though. Im the 2nd red car in the line.

Sent from my LG-D950 using Tapatalk

And I'm the first red car. I have the Q300, catless UEL and high flow cat Nameless over/front with resonator.