2867r power expectations on e85 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RedPandas · 05-11-2019, 10:29 PM

Hey guys, I tried searching this over the forums and dont really see how much power this kit makes at 7psi and 10psi. I have a jdl kit with an upgraded intercooler and 3 inch piping with a stock catback. I know it's all all about numbers but I just want some kind of reference on what numbers to expect that 7 and 10 psi on e85.

DarkPira7e · 05-11-2019, 10:58 PM

Probably 300-350whp. The tune has a lot to do with it too. Assuming you have upgraded the fuel system to run e85. There is a huge JDL owner's thread that has quite a bit of 2867r content if I recall.

RedPandas · 05-11-2019, 11:06 PM

Quote:

Originally Posted by DarkPira7e

Probably 300-350whp. The tune has a lot to do with it too. Assuming you have upgraded the fuel system to run e85. There is a huge JDL owner's thread that has quite a bit of 2867r content if I recall.

I've tried searching there in advanced search for this specific turbo with very little luck.

OzzyGT86 · 05-11-2019, 11:14 PM

I’m running a 2867r Gen 2 with full 3 inch piping on e85. At 10psi I make around 330 whp. According to my tuner on my 12 psi map I’m over 400 wheel but who knows lol

RedPandas · 05-11-2019, 11:29 PM

Quote:

Originally Posted by OzzyGT86

I’m running a 2867r Gen 2 with full 3 inch piping on e85. At 10psi I make around 330 whp. According to my tuner on my 12 psi map I’m over 400 wheel but who knows lol

Do you have any vids?

DarkPira7e · 05-11-2019, 11:45 PM

@RedPandas http://www.ft86club.com/forums/showthread.php?t=90149 read every page

The on-site search isn't great. Use Google and look for results from ft86club

OzzyGT86 · 05-12-2019, 07:07 PM

Quote:

Originally Posted by RedPandas

Do you have any vids?

I do but on my phone if you want to text me just dm me your #

RedPandas · 05-13-2019, 10:57 PM

Quote:

Originally Posted by OzzyGT86

I do but on my phone if you want to text me just dm me your #

btw, how loud is your setup?

tom@ptuning · 05-27-2019, 04:11 PM

We just dyno tuned a customers car with our PTUNING turbo kit with a 2867R. Using a stock header and 2.5" exhaust on 93 octane it made 300WHP on our Dyno Dynamics dyno (AKA the hearbreak dyno). On E85 it would be in the neighborhood of 330-340WHP.

WC-BRZ · 05-28-2019, 12:31 PM

Quote:

Originally Posted by tom@ptuning

We just dyno tuned a customers car with our PTUNING turbo kit with a 2867R. Using a stock header and 2.5" exhaust on 93 octane it made 300WHP on our Dyno Dynamics dyno (AKA the hearbreak dyno). On E85 it would be in the neighborhood of 330-340WHP.

How is the lag for the 2867R vs 2860R?

Generally, with either of those, can full spool be expected before 3K rpm or higher?

Also, how much more would it cost if someone doesn't want any of the available options listed on your site, but want to go with a G25 instead?

Thank you

RedPandas · 05-28-2019, 01:26 PM

Quote:

Originally Posted by tom@ptuning

We just dyno tuned a customers car with our PTUNING turbo kit with a 2867R. Using a stock header and 2.5" exhaust on 93 octane it made 300WHP on our Dyno Dynamics dyno (AKA the hearbreak dyno). On E85 it would be in the neighborhood of 330-340WHP.

how much boost was this?

tom@ptuning · 05-28-2019, 01:42 PM

Quote:

Originally Posted by WC-BRZ

How is the lag for the 2867R vs 2860R?

Generally, with either of those, can full spool be expected before 3K rpm or higher?

Also, how much more would it cost if someone doesn't want any of the available options listed on your site, but want to go with a G25 instead?

Thank you

Full boost was achieved a bit over 4000RPM, although transient lag is nearly non existent. Keep in mind this was with a stock header. And unfortunately, the G25 series turbos will not work with our kit.

tom@ptuning · 05-28-2019, 01:42 PM

Quote:

Originally Posted by RedPandas

how much boost was this?

11.5 PSI

RedPandas · 05-28-2019, 01:47 PM

Quote:

Originally Posted by tom@ptuning

11.5 PSI

Oh I just noticed it was stock header. How much would it be on an aftermarket header.

05-11-2019, 10:29 PM	#1
RedPandas Member Join Date: May 2019 Drives: 2018 BRZ Location: West Covina Posts: 26 Thanks: 7 Thanked 2 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	2867r power expectations on e85 Hey guys, I tried searching this over the forums and dont really see how much power this kit makes at 7psi and 10psi. I have a jdl kit with an upgraded intercooler and 3 inch piping with a stock catback. I know it's all all about numbers but I just want some kind of reference on what numbers to expect that 7 and 10 psi on e85.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PTuning V2, Gen 2 GTX 2867R	86Tony	Engine, Exhaust, Bolt-Ons	9	10-10-2018 10:26 PM
Power expectations with catless UEL/ABE/k&n filter on OFT UEL stg 2	B-R-Z	Software Tuning	24	09-13-2014 08:25 AM
MPG expectations? FR-S and BRZ	Mino	Engine, Exhaust, Transmission	80	03-04-2012 08:48 PM
Interior Expectations	Archer256	Scion FR-S / Toyota 86 GT86 General Forum	57	03-31-2011 03:28 PM

05-11-2019, 10:58 PM	#2
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 3,932 Thanks: 3,199 Thanked 4,095 Times in 2,045 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Probably 300-350whp. The tune has a lot to do with it too. Assuming you have upgraded the fuel system to run e85. There is a huge JDL owner's thread that has quite a bit of 2867r content if I recall.

05-11-2019, 11:14 PM	#4
OzzyGT86 Senior Member Join Date: Dec 2014 Drives: Ultramarine GT86 Location: Downey CA Posts: 447 Thanks: 34 Thanked 35 Times in 29 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I’m running a 2867r Gen 2 with full 3 inch piping on e85. At 10psi I make around 330 whp. According to my tuner on my 12 psi map I’m over 400 wheel but who knows lol

05-11-2019, 11:45 PM	#6
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 3,932 Thanks: 3,199 Thanked 4,095 Times in 2,045 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	@RedPandas http://www.ft86club.com/forums/showthread.php?t=90149 read every page The on-site search isn't great. Use Google and look for results from ft86club

05-27-2019, 04:11 PM	#9
tom@ptuning Member Join Date: May 2019 Drives: 2013 Scion FRS Location: Manassas, Va Posts: 30 Thanks: 10 Thanked 23 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	We just dyno tuned a customers car with our PTUNING turbo kit with a 2867R. Using a stock header and 2.5" exhaust on 93 octane it made 300WHP on our Dyno Dynamics dyno (AKA the hearbreak dyno). On E85 it would be in the neighborhood of 330-340WHP.

User Name		Remember Me?
Password