|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
04-12-2018, 03:40 PM | #1 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,297
Thanks: 1,218
Thanked 863 Times in 570 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
Suspension noise identified, need help diagnosing a fix
I’ve been having this horrible creak coming from my HVT camber plate for months now.
I have finally determined it is from the main strut nut being too tight on the camber plate, and preventing motion of the bushing and bearing. I find this strange because in the past I could crank 41lbs on the strut nut and I would have full aritcualation...camber plates have 90k miles on them. A shop is saying the conical washer may have flattened over time? I have a track day this Sunday, and I want to make sure I’m doing everything the right way. The tube nut holding on the camber plate has 10 threads still attached but it’s only on at around 10lbs. Any ideas on why exactly I can’t crank down my strut nut without it causing binding issues with the camber plate? TIA! Steve |
04-12-2018, 04:18 PM | #2 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,297
Thanks: 1,218
Thanked 863 Times in 570 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
These are the plates in question. That fancy Torrington bearing is actually made out of some not so fancy plastic. Is it possible that this has been crushed over the period over 90k miles? They have a gritty feeling when spinning them in my hand but they do still spin. |
04-13-2018, 11:36 AM | #3 |
-
Join Date: Nov 2012
Drives: '13 FRS - STX
Location: SF Bay Area
Posts: 10,367
Thanks: 13,741
Thanked 9,482 Times in 5,000 Posts
Mentioned: 94 Post(s)
Tagged: 3 Thread(s)
|
Looks very similar to the camber plates kw sells, that little plastic bearing gets beat to hell but it still should work, sorry there's no better suggestions...
|
04-13-2018, 12:15 PM | #4 | |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,297
Thanks: 1,218
Thanked 863 Times in 570 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I did fix the noise however. It was either everything not stacking corrctly (I would let the weight of the car line everything up) or it was the dust boot needing to be cut to fit over the inverted monotube strut. The hole is too narrow and gets stuck on the camber plate shelf of the strut. |
|
The Following User Says Thank You to norcalpb For This Useful Post: | strat61caster (04-13-2018) |
04-16-2018, 03:34 PM | #5 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,297
Thanks: 1,218
Thanked 863 Times in 570 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
Just an update to this, the noise came back during my track day but it didn’t affect anything.
I may just replace these plates for Group N top hats, but does anyone know how much camber I can get with just camber bolts??? I’m dropped 20mm on stock diameter springs with 235/40/17 (245mm contact patch) on 17x9 +35. |
The Following User Says Thank You to norcalpb For This Useful Post: | strat61caster (04-16-2018) |
04-17-2018, 03:45 AM | #6 | |
Senior Member
Join Date: Feb 2013
Drives: Whiteout FRS
Location: San Francisco
Posts: 1,245
Thanks: 904
Thanked 414 Times in 296 Posts
Mentioned: 31 Post(s)
Tagged: 2 Thread(s)
|
Quote:
|
|
04-17-2018, 03:48 AM | #7 |
Senior Member
Join Date: Feb 2013
Drives: Whiteout FRS
Location: San Francisco
Posts: 1,245
Thanks: 904
Thanked 414 Times in 296 Posts
Mentioned: 31 Post(s)
Tagged: 2 Thread(s)
|
For some reason it won't let me edit my post without deleting every... but to add to the top post, 16mm camber bolt on top and 14mm camber bolt at bottom. Left tire (driver) is old tire running at 5/32 tread (-2.33). New one on the right side (passenger) is at 8/32 tread (at -2.33 but was able to reach to -2.9 for some reason).
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Diagnosing a brake noise, need help.. | Subie_Nubie | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 18 | 12-27-2017 02:47 AM |
Suspension Loud Noise | jdavila | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 09-15-2017 12:15 PM |
Suspension noise? | HubertK | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 4 | 07-09-2017 08:50 PM |
Stock suspension noise | lite | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 6 | 06-12-2016 05:55 PM |
Need help diagnosing engine noise and misfire | Killerb92 | Engine, Exhaust, Transmission | 21 | 12-09-2015 11:14 PM |