19x10 offset no camber? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

tooslow4umayne · 06-22-2016, 11:22 AM

Quote:

Originally Posted by wparsons

You could, but that'll push the wheels further out needing more camber or pulled fenders.

If you know you're going to need the lower offset eventually, just buy the right offset for the airbags and set the alignment with springs to not have huge poke.

Thanks for the input! what kind of offset would you recommend ?

wparsons · 06-22-2016, 01:47 PM

Quote:

Originally Posted by tooslow4umayne

Thanks for the input! what kind of offset would you recommend ?

No idea, you'll need to know the diameter of the airbags to figure that out though.

Cole · 06-24-2016, 09:39 AM

Quote:

Originally Posted by wparsons

No idea, you'll need to know the diameter of the airbags to figure that out though.

No, I think he wants you to get your spoon out, then find the information for him, place it on the spoon and then feed him. You're really not helping him here

chaoskaze · 06-24-2016, 09:45 AM

Quote:

Originally Posted by mav1178

Funny, I've done tons of suspension swap in my own garage and I'll never go back to doing that again if I can rent a lift.

-alex

Sad Face.........

No lift

D_Thissen · 06-30-2016, 04:39 PM

Quote:

Originally Posted by Cole

No, I think he wants you to get your spoon out, then find the information for him, place it on the spoon and then feed him. You're really not helping him here

@wparsons remember to make the airplane sounds too.

wparsons · 07-01-2016, 04:41 PM

Quote:

Originally Posted by D_Thissen

@wparsons remember to make the airplane sounds too.

I only make plane sounds and spoon feed one person per day, and my 5 month old is more fun than this guy

Liquid6 · 07-02-2016, 06:14 PM

i had 19x8.5 ,19x10 with eibach and it cleared but i needed more low so i put in coils. offset was 45,50 no poke 1* camber. i don't know if your offset will work it'll poke out a lot.

tooslow4umayne · 07-03-2016, 10:03 AM

Quote:

Originally Posted by Liquid6

i had 19x8.5 ,19x10 with eibach and it cleared but i needed more low so i put in coils. offset was 45,50 no poke 1* camber. i don't know if your offset will work it'll poke out a lot.

Thanks for your input man ! Yeah i really need to get it right i wanna order these custom wheels. Do you have any pictures of yours ?

Liquid6 · 07-03-2016, 01:55 PM

Quote:

Originally Posted by tooslow4umayne

Thanks for your input man ! Yeah i really need to get it right i wanna order these custom wheels. Do you have any pictures of yours ?

Check my Instagram @whtout86

Sent from my iPhone using Tapatalk

Liquid6 · 07-03-2016, 01:56 PM

What wheels are you looking to get. I just ordered a set of AG wheels. They should be installed this week

Sent from my iPhone using Tapatalk

tooslow4umayne · 07-03-2016, 09:36 PM

Quote:

Originally Posted by Liquid6

What wheels are you looking to get. I just ordered a set of AG wheels. They should be installed this week

Sent from my iPhone using Tapatalk

just gonna order a set of CCW wheels but they are backed up on orders for 10 weeks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vossen VFS-2 19x8.5 +45 / 19x10.0 +50	Mark@S	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	12-04-2015 03:17 PM
FS: Rotiform SNA 19x10 et29	hybridcmk	Wheels and Tires	39	11-17-2013 04:08 PM
Rotiform ind 19x8.5 and 19x10	baggedbrz	Wheels and Tires	3	10-22-2013 05:35 PM
FS: Rotiform SNA 19x9, 19x10	FRS GT	Wheels and Tires	21	04-03-2013 11:10 PM
What offset is legal? What offset provides most benefit?	bdohazelnuts	Tracking / Autocross / HPDE / Drifting	2	02-08-2013 01:32 PM

07-02-2016, 06:14 PM	#21
Liquid6 Senior Member Join Date: Oct 2013 Drives: 2014 FR-S Location: Long Island Posts: 375 Thanks: 34 Thanked 71 Times in 57 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	i had 19x8.5 ,19x10 with eibach and it cleared but i needed more low so i put in coils. offset was 45,50 no poke 1* camber. i don't know if your offset will work it'll poke out a lot.

07-03-2016, 01:56 PM	#24
Liquid6 Senior Member Join Date: Oct 2013 Drives: 2014 FR-S Location: Long Island Posts: 375 Thanks: 34 Thanked 71 Times in 57 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	What wheels are you looking to get. I just ordered a set of AG wheels. They should be installed this week Sent from my iPhone using Tapatalk

User Name		Remember Me?
Password