Greddy NA Header - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

crank · 08-21-2013, 10:13 PM

Hey guys sorry if this is a repost but just from bouncing on some pages found that Greddy is in dev on a NA Header but nothing has been released yet.
Here is the info from their page. It looked like they MIGHT have a cat and a catless.... dont quote me on that!!

Link:http://greddy.com/products/jdm-speci...er/frs-brz-86/

Car Make:ScionType:FR-SSize:2013-Notes:Chassis: ZN6
Engine: 4U-GSE
Stainless Steel normially asperiated exhaust manifold (Header)
4-2-1 Tri-Y configuration.
Number of Pieces: 2
Piping: TBA
Gasket: TBA
Resonator: Yes
Silencer: Yes, removable
Weight: TBA lbs
HP: TBA hp
TRQ: TBA ft-lbs

Part #:TBA_HEADERPrice:TBA

Turdinator · 08-21-2013, 11:38 PM

There is a guy here in Melbourne Australia that has installed one. But he has been quiet on his driving opinions after the install.

tokiokun717 · 08-21-2013, 11:46 PM

Quote:

Originally Posted by crank

Hey guys sorry if this is a repost but just from bouncing on some pages found that Greddy is in dev on a NA Header but nothing has been released yet.
Here is the info from their page. It looked like they MIGHT have a cat and a catless.... dont quote me on that!!

Link:http://greddy.com/products/jdm-speci...er/frs-brz-86/

Car Make:ScionType:FR-SSize:2013-Notes:Chassis: ZN6
Engine: 4U-GSE
Stainless Steel normially asperiated exhaust manifold (Header)
4-2-1 Tri-Y configuration.
Number of Pieces: 2
Piping: TBA
Gasket: TBA
Resonator: Yes
Silencer: Yes, removable
Weight: TBA lbs
HP: TBA hp
TRQ: TBA ft-lbs

Part #:TBA_HEADERPrice:TBA

I've been following these the day it came out on the Japanese trust website. The headers are already for sale in Japan catted and non-catted but the greddy USA page hasn't updated it at all for about 6 months. There is also one concern from the images I have seen and that is it seems like there's no O2 sensor port on the header... Will need to confirm whether that's so in the actual product.

FR-Sizzle · 08-22-2013, 01:06 AM

Quote:

Originally Posted by tokiokun717

I've been following these the day it came out on the Japanese trust website. The headers are already for sale in Japan catted and non-catted but the greddy USA page hasn't updated it at all for about 6 months. There is also one concern from the images I have seen and that is it seems like there's no O2 sensor port on the header... Will need to confirm whether that's so in the actual product.

Probably because its just a prototype. When they do release it I bet it will have them.

crank · 08-22-2013, 03:26 AM

Quote:

Originally Posted by tokiokun717

...seems like there's no O2 sensor port on the header... Will need to confirm whether that's so in the actual product.

Yeah i would have to agree that this is just a dev pipe and not production and I wonder why that guy so quiet maybe he will come out and tell us

Anthony · 08-22-2013, 03:53 AM

Lighter than Borla? Probably not, but hopefully. They look equal length.

Wasabi · 08-22-2013, 06:08 PM

Nice! Good find to add to the collection of headers for this vehicle

diss7 · 09-07-2013, 08:50 AM

Quote:

Originally Posted by Anthony

Lighter than Borla? Probably not, but hopefully. They look equal length.

16.3lbs for the non catted

21.1lbs for catted

Anthony · 09-07-2013, 08:52 AM

Quote:

Originally Posted by diss7

16.3lbs for the non catted

21.1lbs for catted

Thanks a lot. I shall update the list.

diss7 · 09-07-2013, 09:25 AM

Quote:

Originally Posted by Anthony

Thanks a lot. I shall update the list.

Cool. Also, they're 60mm. However I'm unsure whether this is ID or OD. I'd guess ID, but that's based on nothing.

Anthony · 09-07-2013, 09:39 AM

Quote:

Originally Posted by diss7

Cool. Also, they're 60mm. However I'm unsure whether this is ID or OD. I'd guess ID, but that's based on nothing.

Cool. I'll update it again. You have a source for this? Right now I'm just linking to your post.

Unfortunately the diameters I have listed are a random mix of ID's and OD's, so when it comes to the diameters, I really like to have a link to a manufacturer or dealer making the claim. Even if they're not specifying inner or outer.

diss7 · 09-07-2013, 09:50 AM

Quote:

Originally Posted by Anthony

Cool. I'll update it again. You have a source for this? Right now I'm just linking to your post.

Unfortunately the diameters I have listed are a random mix of ID's and OD's, so when it comes to the diameters, I really like to have a link to a manufacturer or dealer making the claim. Even if they're not specifying inner or outer.

All good.

Information sourced from their Japan site. Near bottom of page, listed in kg.

https://www.trust-power.com/86_brz/i...l?cate=exhaust

Alastor · 10-31-2022, 03:23 AM

I have this headers decat. ¿Is an UEL or EL?
In my recent tuned I have achieved an improvement of 16cv and the improvement at half revolutions

x808drifter · 10-31-2022, 09:48 AM

Bot? Hacked?
Last post was 2013...

08-22-2013, 03:53 AM	#6
Anthony Weight Nazi Join Date: Aug 2012 Drives: 13 FRS -399lb, 11 335is, 05 Tiburon Location: Biloxi, MS / Gulf Coast 86 Posts: 3,702 Thanks: 5,009 Thanked 3,712 Times in 1,765 Posts Mentioned: 150 Post(s) Tagged: 4 Thread(s)	Lighter than Borla? Probably not, but hopefully. They look equal length. __________________ Build Thread \| The Venus Project \| Any car which holds together for a whole race is too heavy.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Borla UEL header with Greddy Evo 3 Catback	Mister_Sir	Engine, Exhaust, Transmission	26	04-04-2014 12:00 AM
SARD Japan Header & Mid-Pipe & Header & ECU	nigel-jdmparts	Engine, Exhaust, Transmission	63	01-21-2014 12:20 PM
FS: Header back full exhaust system. Borla/Greddy	20firestorm13	Engine, Exhaust, Bolt-Ons	8	06-10-2013 12:40 PM
GReddy Header	Mtlrick	Engine, Exhaust, Transmission	22	03-15-2013 03:52 PM
GReddy in on-deck circle. GReddy turbo for FR-S/BRZ first up.	2JZ-DNA	Engine, Exhaust, Transmission	46	04-19-2012 08:13 PM

08-22-2013, 06:08 PM	#7
Wasabi おい、だいじょうぶ? Join Date: Jan 2013 Drives: BRZ Limited 6 Speed Location: Groton, CT Posts: 132 Thanks: 44 Thanked 54 Times in 33 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Nice! Good find to add to the collection of headers for this vehicle

10-31-2022, 03:23 AM	#13
Alastor Senior Member Join Date: Feb 2019 Drives: Toyota gt86 my19 Location: Spain Posts: 194 Thanks: 25 Thanked 62 Times in 40 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I have this headers decat. ¿Is an UEL or EL? In my recent tuned I have achieved an improvement of 16cv and the improvement at half revolutions

10-31-2022, 09:48 AM	#14
x808drifter LMGTFY Join Date: Mar 2016 Drives: 13 FRS, 91 Miata Location: Lava Town, HI Posts: 2,776 Thanks: 5,561 Thanked 3,646 Times in 1,625 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Bot? Hacked? Last post was 2013...

User Name		Remember Me?
Password