What are my options for a rear bumper/bumper cover/etc that would fit TRD exhausts.

[GNious]

Really interested in quad tips, and was looking into the catback that MXP offers. For obvious reasons, this won't fit my current bumper on my BRZ. I could get the TRD cutouts, but I think they would look low quality. I don't mind paying a bit more to get better quality.

[raian]

rowen/tommy kaira has a really good design thats also a cut out but also has that little wing or spat look at the sideshttp://www.86worx.com/rowen-rear-under-extensions.html

and do you happen to know what size the tips are cuz most diffuser cutouts only fit 9" or 10" inch total (quads) 4"inch for each tip

[GNious]

This would be quad 4", so that's perfect.

Edit: it looks like the cuts into the bumper would be visible with that, have you personally seen anyone using one?

[raian]

Originally Posted by GNious

This would be quad 4", so that's perfect.

Edit: it looks like the cuts into the bumper would be visible with that, have you personally seen anyone using one?

it doesnt cut into the bumper, just the diffuser. it looks like it but it overlaps with it. and no i havent, i was a bit late when i went quad and i just happened to see this quad cut out after i bought my trd quad diffuser

[GNious]

Did you buy the actual diffuser, or just the TRD addons?

[raian]

Originally Posted by GNious

Did you buy the actual diffuser, or just the TRD addons?

i have both but i put on the trd diffuser garnishes cuz im lazy to get the actual diffuser painted haha (and it was free due to it getting rear ended) also another reason why im lazy

[raian]

the picture is pretty dark but heres my car with the cut oits with the blitz nur spec quad exhaust



i has to shave off the insides due to my tips being bigger than 4"

[GNious]

Originally Posted by raian

the picture is pretty dark but heres my car with the cut oits with the blitz nur spec quad exhaust

[IMG][/IMG]

i has to shave off the insides due to my tips being bigger than 4"

Would you say that the cutouts looks stock when applied? Or is it obvious that it was applied with some 3m and some screws? I find it hard to tell in pictures since they aren't close up.

[raian]

Originally Posted by GNious

Would you say that the cutouts looks stock when applied? Or is it obvious that it was applied with some 3m and some screws? I find it hard to tell in pictures since they aren't close up.

it looks stock from far away but if youre upclose to it youll see the difference in the texture and and the pattern due to the cutout just being a solid black rather than matching the diffuser. that doesnt really bother me though cuz in the end it still looks good for what the price is.

[StRacngtC06]

Toyota Part # MS313-18001-A1

[GNious]

Originally Posted by StRacngtC06

Toyota Part # MS313-18001-A1

Is there anywhere one could buy something like this in the US. I don't mind the wait for it to come from Japan, but $400 shipping is too much when it's already nearly $1000.

[raian]

Originally Posted by GNious

Is there anywhere one could buy something like this in the US. I don't mind the wait for it to come from Japan, but $400 shipping is too much when it's already nearly $1000.

https://www.japanparts.com/

https://myjapandirect.com/

[StRacngtC06]

Originally Posted by GNious

Is there anywhere one could buy something like this in the US. I don't mind the wait for it to come from Japan, but $400 shipping is too much when it's already nearly $1000.

I bought mine ebay from japex_trading. $800 total including shipping in 15 days. Pre painted. Dealer installed when arrived.

Sent from my SM-N920P using Tapatalk

[StRacngtC06]