Wheel specs for Rocket Bunny Fenders - Page 17 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DustinS · 02-20-2017, 01:52 PM

Front: 18x10.5 et22 + 10mm Spacer. Rear: 18x10.5 et15 + 25mm Spacer. Resulting in a 18x10.5 et12 front. 18x10.5 et-10 Rear. 285/30/18 Square

VIP BRZ · 02-21-2017, 11:34 AM

Quote:

Originally Posted by DustinS

Front: 18x10.5 et22 + 10mm Spacer. Rear: 18x10.5 et15 + 25mm Spacer. Resulting in a 18x10.5 et12 front. 18x10.5 et-10 Rear. 285/30/18 Square

Are those V1 or V2 fenders?

DustinS · 02-21-2017, 11:42 AM

Quote:

Originally Posted by VIP BRZ

Are those V1 or V2 fenders?

V1

sqd · 02-22-2017, 03:36 AM

Quote:

Originally Posted by DustinS

V1

Wish more people posted specs for meaty fitment on RB fenders. Thanks for those though!

fizzymike · 02-23-2017, 09:28 AM

For my fitment I am running

18x9.5 -8
10x10.5 -18

Personally I think the rear can come out more by about 1/4-1/2 inches. Tires are 245/35 and 265/35. Set at -3 camber.

evomike · 02-23-2017, 10:24 AM

17x10.5-27
18x12.5-10

sqd · 02-24-2017, 04:22 AM

Quote:

Originally Posted by fizzymike

For my fitment I am running

18x9.5 -8
10x10.5 -18

Personally I think the rear can come out more by about 1/4-1/2 inches. Tires are 245/35 and 265/35. Set at -3 camber.

Maybe posting a photo or two would be good, otherwise we have no idea on how that looks.

fizzymike · 02-24-2017, 04:19 PM

Quote:

Originally Posted by sqd

Maybe posting a photo or two would be good, otherwise we have no idea on how that looks.

Yep

VIP BRZ · 02-24-2017, 04:48 PM

Quote:

Originally Posted by fizzymike

For my fitment I am running

18x9.5 -8
10x10.5 -18

Personally I think the rear can come out more by about 1/4-1/2 inches. Tires are 245/35 and 265/35. Set at -3 camber.

Dats V2?

fizzymike · 02-26-2017, 12:52 AM

Quote:

Originally Posted by VIP BRZ

Dats V2?

yes

VIP BRZ · 02-28-2017, 11:00 AM

Hey Y'all,

So I'm Dropping my car off today for install on my V2 Kit, going crazy trying to decide what size spacer/adapter's to get (temporally). Not a lot of wheels specs available for V2 so anyone who can chime in would be greatly appreciated.

My wheels are 17x10" +25 squared 225/45/17

By looking at the Speed Hunters article about the V2 build they followed
http://www.speedhunters.com/2013/10/...nny-86-ver2-0/

His offsets seem pretty insane
18x9.5" -35
18x10.5 - 46

Is the V2 kit THAT much wider then the V1 examples in this thread?
I'm looking at 55mm Adapter in the front, Resulting in: 17x10 -30
& 65mm Adapter in the Back, Resulting in: 17x10 -40

is anyone running anything close to this setup?

sqd · 03-01-2017, 02:17 AM

v2 is only 5mm wider in the rear, I think it's the same width in the front. Not 100% sure though.

VIP BRZ · 03-01-2017, 11:18 AM

Quote:

Originally Posted by sqd

v2 is only 5mm wider in the rear, I think it's the same width in the front. Not 100% sure though.

Article Covering V2 on StanceNation also boasts some crazy offsets
http://www.stancenation.com/2013/10/...y-86frsbrz-v2/

18×9.5 -35 , Front

18×10.5 -46 , Rear

Idk, i think I'm in the ball park. You all are probably running meatr tires? is why we don't see much of these super low offsets in this tread.

Oh.. that's the same car ;P

evomike · 03-01-2017, 11:43 AM

Quote:

Originally Posted by VIP BRZ

Article Covering V2 on StanceNation also boasts some crazy offsets
http://www.stancenation.com/2013/10/...y-86frsbrz-v2/

18×9.5 -35 , Front

18×10.5 -46 , Rear

Idk, i think I'm in the ball park. You all are probably running meatr tires? is why we don't see much of these super low offsets in this tread.

Oh.. that's the same car ;P

if i ran those widths id probably use offsets like that, my widths are wider and my offest is super far off that so its not that crazy at all. and you dont see those offsets because wheels like that are rare and expensive would be my guess.

02-20-2017, 01:52 PM	#225
DustinS Senior Member Join Date: Apr 2014 Drives: 2013 Ultramarine FR-S Location: Springfield, MO Posts: 1,948 Thanks: 2,539 Thanked 1,414 Times in 804 Posts Mentioned: 31 Post(s) Tagged: 3 Thread(s)	Front: 18x10.5 et22 + 10mm Spacer. Rear: 18x10.5 et15 + 25mm Spacer. Resulting in a 18x10.5 et12 front. 18x10.5 et-10 Rear. 285/30/18 Square __________________

03-01-2017, 02:17 AM	#236
sqd Senior Member Join Date: May 2015 Drives: '13 SWP GT86 Location: Sweden Posts: 395 Thanks: 178 Thanked 377 Times in 166 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	v2 is only 5mm wider in the rear, I think it's the same width in the front. Not 100% sure though. __________________ IG @squareddesign http://www.squareddesign.se

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replica rocket bunny	crildz	Cosmetic Modification (Interior/Exterior/Lighting)	103	05-09-2014 04:35 PM
Rocket Bunny FRS in Dubai	TAP Auto Parts	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	49	12-04-2012 01:39 PM
Red Rocket Bunny FR-S - Speedhunters	RaceR	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	5	10-12-2012 12:48 AM
Rocket Bunny or Modelista? HELP!!!	ShowstoppersUSA	Cosmetic Modification (Interior/Exterior/Lighting)	21	08-16-2012 01:23 PM
GReddy/Rocket Bunny Wheels?	Coultergeist	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	08-15-2012 02:39 AM

02-23-2017, 09:28 AM	#229
fizzymike Senior Member Join Date: Aug 2016 Drives: 2014 Silver BRZ Location: Dark Side of the Moon Posts: 144 Thanks: 19 Thanked 26 Times in 23 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	For my fitment I am running 18x9.5 -8 10x10.5 -18 Personally I think the rear can come out more by about 1/4-1/2 inches. Tires are 245/35 and 265/35. Set at -3 camber.

02-23-2017, 10:24 AM	#230
evomike Senior Member Join Date: Oct 2013 Drives: frs Location: philly Posts: 562 Thanks: 18 Thanked 310 Times in 182 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	17x10.5-27 18x12.5-10

02-28-2017, 11:00 AM	#235
VIP BRZ Senior Member Join Date: Mar 2016 Drives: 2014 Subaru BRZ Location: CA - San Fernando Valley Posts: 492 Thanks: 242 Thanked 333 Times in 179 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Hey Y'all, So I'm Dropping my car off today for install on my V2 Kit, going crazy trying to decide what size spacer/adapter's to get (temporally). Not a lot of wheels specs available for V2 so anyone who can chime in would be greatly appreciated. My wheels are 17x10" +25 squared 225/45/17 By looking at the Speed Hunters article about the V2 build they followed http://www.speedhunters.com/2013/10/...nny-86-ver2-0/ His offsets seem pretty insane 18x9.5" -35 18x10.5 - 46 Is the V2 kit THAT much wider then the V1 examples in this thread? I'm looking at 55mm Adapter in the front, Resulting in: 17x10 -30 & 65mm Adapter in the Back, Resulting in: 17x10 -40 is anyone running anything close to this setup?

User Name		Remember Me?
Password