Official San Antonio , TX Thread!! - Page 205 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

tuckdaddy · 04-29-2013, 02:10 PM

Yeah I saw you and Adam post in there! I haven't driven the car yet but I'm anxious to hear the difference.

EL7 · 04-29-2013, 04:51 PM

Quick question...

Does anyone have a recommendation on a shop that can do quality window tint and 3M protection film for the nose and fenders? I just moved here and don't really know of any reputable shops. I heard to stay away from Custom Sounds and Mother's.

Dynotronics1 · 04-29-2013, 04:58 PM

Quote:

Originally Posted by Apollo_1092

Anyone have advice on an UEL header? Since I have the Evo3 exhaust I'm tempted to wait for GReddy and get their header to match up parts, but there isn't a whole lot of info on it. After watching some videos on other peoples headers I'm itching to get something.

we sell the PPE ceramic coated with overpipe. Have them in stock right now

Got3n · 04-29-2013, 04:59 PM

Quote:

Originally Posted by EL7

Quick question...

Does anyone have a recommendation on a shop that can do quality window tint and 3M protection film for the nose and fenders? I just moved here and don't really know of any reputable shops. I heard to stay away from Custom Sounds and Mother's.

check out @JsDetail, hes fantastic! https://www.facebook.com/pages/Jays-...20848581336722

Ricepuddin · 04-29-2013, 06:39 PM

Quote:

Originally Posted by reyruiz191

@Ricepuddin how many miles were put on the coils and how much?
I have a friend that might be interested.

Did i ever get back to you on this, I am starting to forget shit more often... must be getting old

mx5 2nr · 04-30-2013, 02:47 PM

Hey got a question for yall... Do any of you know an auto upholstery shops in San Antonio that's good? I have some interior pieces and pre-cut leather that need to be put together for my other car & I want this done better than if I attempted it.

Any help would be appreciated...

Dynotronics1 · 04-30-2013, 03:00 PM

Quote:

Originally Posted by mx5 2nr

Hey got a question for yall... Do any of you know an auto upholstery shops in San Antonio that's good? I have some interior pieces and pre-cut leather that need to be put together for my other car & I want this done better than if I attempted it.

Any help would be appreciated...

ABC upholstery, they do all mt Porsche stuff. First rate, no corners cut!!

mx5 2nr · 04-30-2013, 04:06 PM

Quote:

Originally Posted by Dynotronics1

ABC upholstery, they do all mt Porsche stuff. First rate, no corners cut!!

Awesome, I'll look it up - where in town are they located at?... It shouldn't be too difficult for them. It's basically the entire Redline Goods catalog for the NA Miata, except for the A-Pillars and top windsheild header. It's all cut to fit, and all they would need to do is stretch and glue it. I'd do it myself, but I'm a bit sketchy on my upholstery skills & I don't want to throw away money if I mess it up. lol

EDIT - nevermind, found them, it's off Vance Jackson, right? HA! and nearby USAA! I'm going to have to take an extended lunch break to check them out!

johatan25 · 04-30-2013, 08:03 PM

Update on my car:
Buffed an HOPEFULLY ready by the end of the week.

Almost 4 weeks on an automatic. Geesh

tripjammer · 05-01-2013, 12:16 PM

Quote:

Originally Posted by Got3n

check out @JsDetail, hes fantastic! https://www.facebook.com/pages/Jays-...20848581336722

Yeah go to JaysDetail. He is the best out there!

tuckdaddy · 05-01-2013, 01:14 PM

After a couple hundred miles the little plug has made a noticeable difference and for the price can't be beat! ordering the perrin inlet tube tomorrow. Have to lose the sound tube..

mRdeMs83 · 05-01-2013, 01:50 PM

I plugged mine in the cabin also. Also removed the tube entirely after adding the intake.

Hachiroku FR-S

MmmDieselFumes · 05-01-2013, 06:31 PM

Made some magnetic autocross numbers today. Picked a 1'x2' roll of magnetic adhesive vinyl. I cut it into two 8.5"x11" pieces (there was a spare ~7" wide piece). Then I made up some numbers in photoshop, printed them to another piece of paper, adhered it to the mag-vinyl, then cut out the numbers. Done one side so far. Takes a while, but I think it looks nice. Dunno how long it'll last, but maybe next time I'll do it out of some heartier glossy paper. Anyhow, here's some pics.

tuckdaddy · 05-01-2013, 06:47 PM

Quote:

Originally Posted by MmmDieselFumes

Made some magnetic autocross numbers today. Picked a 1'x2' roll of magnetic adhesive vinyl. I cut it into two 8.5"x11" pieces (there was a spare ~7" wide piece). Then I made up some numbers in photoshop, printed them to another piece of paper, adhered it to the mag-vinyl, then cut out the numbers. Done one side so far. Takes a while, but I think it looks nice. Dunno how long it'll last, but maybe next time I'll do it out of some heartier glossy paper. Anyhow, here's some pics.

looking good Clint!

04-30-2013, 02:47 PM	#2862
mx5 2nr Senior Member Join Date: Aug 2012 Drives: FRS/NA1/'12 Mustang/'97 4Runner Location: Kyle, TX Posts: 249 Thanks: 230 Thanked 85 Times in 66 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey got a question for yall... Do any of you know an auto upholstery shops in San Antonio that's good? I have some interior pieces and pre-cut leather that need to be put together for my other car & I want this done better than if I attempted it. Any help would be appreciated... __________________ '90 Miata - weekends '13 FRS - weekdays '97 4-Runner - grunt work '12 Mustang - wife's

04-30-2013, 08:03 PM	#2865
johatan25 Senior Member Join Date: Oct 2012 Drives: Lightning Red BRZ - Premium 6MT Location: San Antonio Posts: 189 Thanks: 73 Thanked 78 Times in 61 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Update on my car: Buffed an HOPEFULLY ready by the end of the week. Almost 4 weeks on an automatic. Geesh __________________ Mods done (RED), Mods to come(BLACK): LED Swap, GReddy SP Elite Exhaust, Leather Seats, TSW 18x8.5 + 235/35, MOTIV Over & Catless Test pipe, EcuTek 93 Octane tune, PERRIN Lightweight Pulley, PERRIN Intake Inlet + drop-in filter,, e85 fuel map, 5axis Spoiler?, Borla UEL Headers?

05-01-2013, 06:31 PM	#2869
MmmDieselFumes Senior Member Join Date: Jul 2012 Drives: . Location: . Posts: 333 Thanks: 176 Thanked 118 Times in 80 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Made some magnetic autocross numbers today. Picked a 1'x2' roll of magnetic adhesive vinyl. I cut it into two 8.5"x11" pieces (there was a spare ~7" wide piece). Then I made up some numbers in photoshop, printed them to another piece of paper, adhered it to the mag-vinyl, then cut out the numbers. Done one side so far. Takes a while, but I think it looks nice. Dunno how long it'll last, but maybe next time I'll do it out of some heartier glossy paper. Anyhow, here's some pics. Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official What are you listening to thread?	TRDMAN	Off-Topic Lounge [WARNING: NO POLITICS]	2323	04-05-2024 07:34 AM
Official FT-86 Specs / Info Thread	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	203	09-09-2019 10:43 PM
The official hand drawn thread.	LexusFman	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	12	04-06-2013 05:11 AM
Official 2011 WRC Season Thread	4agze	Other Vehicles & General Automotive Discussions	4	04-01-2011 04:13 PM
Official MMA Thread	zigzagz94	Off-Topic Lounge [WARNING: NO POLITICS]	11	12-15-2009 10:59 PM

04-29-2013, 04:51 PM	#2858
EL7 Senior Member Join Date: Apr 2013 Drives: 13 BRZ Limited 6MT SWP Location: San Antonio, TX Posts: 90 Thanks: 50 Thanked 24 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Quick question... Does anyone have a recommendation on a shop that can do quality window tint and 3M protection film for the nose and fenders? I just moved here and don't really know of any reputable shops. I heard to stay away from Custom Sounds and Mother's.

User Name		Remember Me?
Password