JPM Coachworks Alcantara Prototypes

[NSV]

Originally Posted by 2pt5RS

One off piece by JPM. They're undecided if they want to start making these.





It's still 2 pieces and fits perfectly. I was a little apprehensive about it, then we put it in. It's sexy as hell.

I do want this pieces. Please take my money !

[Shinryu]

They really should bring that dash into production; I feel like having a very prominent, central piece like that really brings together all the other products.

[2pt5RS]

Originally Posted by Shinryu

They really should bring that dash into production; I feel like having a very prominent, central piece like that really brings together all the other products.

I agree 100%.

Sadly, they're so backed up right now with orders, it may be a while before they start selling this, if they do.

[larryt1026]

these look great! are there installation instructions yet? Particularly for the dash gauge cluster piece. Thanks!

[JPM Coachworks]

Originally Posted by larryt1026

these look great! are there installation instructions yet? Particularly for the dash gauge cluster piece. Thanks!

@larryt1026 Instructions for installing the Gauge Hood can be found in this thread: http://www.ft86club.com/forums/showt...JPM+Coachworks

[zohare]

JPM, did you guys find a way to recover/pad the armrest in the doors? If you were going that direction that is... I had how hard that section is. Covers for the dash bezels might be tricky, but I'd rock alcantara with the JPM logo and red stitching

[JPM Coachworks]

Originally Posted by illmatic

^Now that looks great and completes the look. I'd buy it!

Originally Posted by Laika

I said I wasn't interested in doing those pieces in Alcantara before. I think I just changed my mind.

I wonder if I could have some embroidery on the bottom right corner of the solid piece without it being tacky. Not sure what I'd do though, VIN, BRZ, show size

Originally Posted by Khazzy

Man I want that JPM dash trim in my BRZ!

Originally Posted by NSV

I do want this pieces. Please take my money !

Originally Posted by zohare

JPM, did you guys find a way to recover/pad the armrest in the doors? If you were going that direction that is... I had how hard that section is. Covers for the dash bezels might be tricky, but I'd rock alcantara with the JPM logo and red stitching

@zohare, The padded armrests and upper trim for the doors are available. Please contact us directly if you are interested.

Originally Posted by Shinryu

They really should bring that dash into production; I feel like having a very prominent, central piece like that really brings together all the other products.

@Shinryu, @zohare, @NSV, @Khazzy, @Laika, @illmatic: Thank you for expressing your interest. It goes a long way towards our decision making with what products to release. The Alcantara wrapped dash panels will likely be available soon via website. Until it is available in the online catalog, please feel free to contact us directly via email or private message for all inquiries related to this product as well as the simulated leather varieties of the existing catalog.

-Andrew

[zohare]

Originally Posted by JPM Coachworks

@zohare, The padded armrests and upper trim for the doors are available. Please contact us directly if you are interested.

@Shinryu, @zohare, @NSV, @Khazzy, @Laika, @illmatic: Thank you for expressing your interest. It goes a long way towards our decision making with what products to release. The Alcantara wrapped dash panels will likely be available soon via website. Until it is available in the online catalog, please feel free to contact us directly via email or private message for all inquiries related to this product as well as the simulated leather varieties of the existing catalog.

-Andrew

Thanks for the response! Expect some PMs haha

[merlin2111]

Originally Posted by 2pt5RS

One off piece by JPM. They're undecided if they want to start making these.





It's still 2 pieces and fits perfectly. I was a little apprehensive about it, then we put it in. It's sexy as hell.

What was it?! Photos stopped working!

[wootwoot]

Pictures of the armrest and upper door trims please.

[Gen]

Originally Posted by wootwoot

Pictures of the armrest and upper door trims please.

If you can hold out about a week-ish, I should have some stuff to post up. As a consolation, they did this for me a while back:

[Vracer111]

Originally Posted by Racecomp Engineering

Im loving my JPM COACHWORKS Steering wheel ! Had it more than 6 months and 8k on it and its like new !



Myles

You should really upgrade to the JPM Coachworks Alcantara handbrake boot and shift boot at a minimum...really does a wonder to upscale the look of the interior compared to the cheap looking stock ones. The dash cover is more functional than just looks too, helps cut glare out of the windshield - I wouldn't mind getting the whole dash covered in Alcantara actually... maybe one day.

I too would like the Alcantara wrapped dash pieces.... preferably with a "JPM Coachworks" logo in the bottom RH corner of the passenger side one as an option. Would it be possible to have a DIY version of the cover like for the hand brake? I wouldn't mind doing it myself, have plenty of the adhesive left over from the DIY handbrake install and will take off the factory vinyl wrap. Love the shift boot, handbrake boot, and dash pad in my FR-S; y'all do excellent work!

[Racecomp Engineering]

Originally Posted by Vracer111

You should really upgrade to the JPM Coachworks Alcantara handbrake boot and shift boot at a minimum...really does a wonder to upscale the look of the interior compared to the cheap looking stock ones. The dash cover is more functional than just looks too, helps cut glare out of the windshield - I wouldn't mind getting the whole dash covered in Alcantara actually... maybe one day.

I too would like the Alcantara wrapped dash pieces.... preferably with a "JPM Coachworks" logo in the bottom RH corner of the passenger side one as an option. Would it be possible to have a DIY version of the cover like for the hand brake? I wouldn't mind doing it myself, have plenty of the adhesive left over from the DIY handbrake install and will take off the factory vinyl wrap. Love the shift boot, handbrake boot, and dash pad in my FR-S; y'all do excellent work!

Agreed. But I'm at a point where Im not sure if this car will get stripped and have a full cage so I am waiting to see where it goes.

2014 WRX/STI is going to be a beast so this car could become a track car only. Not sure.

Myles

[greenguy101]

My shift boot, E-brake boot and gauge hood shipped yesterday. I can't wait to get them installed. And I will be buying those dash panels as soon as they are in production, they looks amazing.