Car won’t start after installed injectors - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

bryansuriel3 · 07-11-2019, 09:31 AM

Decided to upgrade to 700cc injectors I followed the instructions and put them on then i started the car. For the first time it ran fine with no leaks then for about 30 seconds I revd it up to about 2,500 it was ok . It was hesitating on idle but I assumed it’s cus I needed to get tuned. I shut the car off and then turned it on to check if it still works and now this happens car won’t even start and I got a code at the end of the video p062d

After that, I decided to put the stock injectors back on and the car works fine any thoughts? I’ve tried everything I could think of and I’m also on 10:1 compression

Sent from my iPhone using Tapatalk

spitfire481 · 07-11-2019, 11:32 AM

did you get it tuned?

humfrz · 07-11-2019, 11:46 AM

How did you get the compression ratio to 10:1 - ?

Other power mods?

humfrz

Tcoat · 07-11-2019, 11:53 AM

Quote:

Originally Posted by spitfire481

did you get it tuned?

https://www.ft86club.com/forums/show...18#post3221718

Quote:

Originally Posted by humfrz

How did you get the compression ratio to 10:1 - ?

Other power mods?

humfrz

The bigger question is why on earth he dropped the compression!

humfrz · 07-11-2019, 12:02 PM

Quote:

Originally Posted by Tcoat

https://www.ft86club.com/forums/show...18#post3221718

The bigger question is why on earth he dropped the compression!

Maybe for FI -

But, shouldn't the car at least start after the injector swap ?

"I had a 2 barrel carb on my car and it ran fine, but when I put a 4 barrel carb on, it wouldn't start".

Did you hook up the fuel line? Did you hook up the linkage?

humfrz - stuck in the 50's -

bryansuriel3 · 07-11-2019, 12:05 PM

Quote:

Originally Posted by humfrz

How did you get the compression ratio to 10:1 - ?

Other power mods?

humfrz

Sbd Turbo kit
Full catless exhaust

Sent from my iPhone using Tapatalk

bryansuriel3 · 07-11-2019, 12:13 PM

Quote:

Originally Posted by humfrz

Maybe for FI -

But, shouldn't the car at least start after the injector swap ?

"I had a 2 barrel carb on my car and it ran fine, but when I put a 4 barrel carb on, it wouldn't start".

Did you hook up the fuel line? Did you hook up the linkage?

humfrz - stuck in the 50's -

It did once I installed it But after I shut it off the car and turned it back on that problem in the video started happening
Doesn’t happen when I put stock ones back In

Didn’t touch the fuel lines just removed the plate over it and unbolted the fuel rail

Sent from my iPhone using Tapatalk

humfrz · 07-11-2019, 12:17 PM

Quote:

Originally Posted by bryansuriel3

Sbd Turbo kit
Full catless exhaust

Sent from my iPhone using Tapatalk

Are you running on pump gas?

If so, why are you replacing the injectors?

humfrz

Lantanafrs2 · 07-11-2019, 12:41 PM

Might have been overly rich?

bryansuriel3 · 07-11-2019, 12:45 PM

Yeah pump gas I’m changing injectors so I can get more hp I was on stock injectors I just got my engine rebuilt so I’m trying to finish this so I can get tuned

Sent from my iPhone using Tapatalk

humfrz · 07-11-2019, 12:54 PM

Quote:

Originally Posted by bryansuriel3

Yeah pump gas I’m changing injectors and so I can get more hp I was on stock injectors I just got my engine rebuilt so I’m trying to finish this so I can get tuned

Sent from my iPhone using Tapatalk

Well, maybe I'm confused, because I came from the generation where FI meant Fuel Injected, but, according to their web site, you shouldn't have to change injectors if you are using pump gas -

https://spdbydesign.com/product/sbd5...-brzscion-frs/

humfrz - maybe I need a mid-morning nap?

spitfire481 · 07-11-2019, 01:27 PM

you doubled, or more the injector size without re-scaling the fuel table. Car is so rich its killing itself. You can't just swap injectors over and not adjust the tune.

bryansuriel3 · 07-11-2019, 01:51 PM

Quote:

Originally Posted by spitfire481

you doubled, or more the injector size without re-scaling the fuel table. Car is so rich its killing itself. You can't just swap injectors over and not adjust the tune.

But shouldn’t the car start tho? And
I’m going to get it tuned I wanted to make sure everything is fine first before scheduling it

Sent from my iPhone using Tapatalk

Tcoat · 07-11-2019, 01:52 PM

Quote:

Originally Posted by spitfire481

you doubled, or more the injector size without re-scaling the fuel table. Car is so rich its killing itself. You can't just swap injectors over and not adjust the tune.

Yep. The p062d code is for a defective or malfunctioning injector so the car thinks it is broken.
Which it actually will be if OP keeps changing stuff before he gets a tune!

07-11-2019, 09:31 AM	#1
bryansuriel3 Member Join Date: Feb 2015 Drives: Red Brz Location: Dania, FL Posts: 85 Thanks: 15 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Car won’t start after installed injectors Decided to upgrade to 700cc injectors I followed the instructions and put them on then i started the car. For the first time it ran fine with no leaks then for about 30 seconds I revd it up to about 2,500 it was ok . It was hesitating on idle but I assumed it’s cus I needed to get tuned. I shut the car off and then turned it on to check if it still works and now this happens car won’t even start and I got a code at the end of the video p062d After that, I decided to put the stock injectors back on and the car works fine any thoughts? I’ve tried everything I could think of and I’m also on 10:1 compression Sent from my iPhone using Tapatalk

07-11-2019, 11:32 AM	#2
spitfire481 Senior Member Join Date: Mar 2013 Drives: 2JZ FRS Location: Pure Automotive Performance Posts: 1,378 Thanks: 97 Thanked 1,354 Times in 621 Posts Mentioned: 27 Post(s) Tagged: 2 Thread(s)	did you get it tuned? __________________ Pure Automotive Performance MoTeC Build Thread @spitfire481

07-11-2019, 12:45 PM	#10
bryansuriel3 Member Join Date: Feb 2015 Drives: Red Brz Location: Dania, FL Posts: 85 Thanks: 15 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Car won’t start after installed injectors Yeah pump gas I’m changing injectors so I can get more hp I was on stock injectors I just got my engine rebuilt so I’m trying to finish this so I can get tuned Sent from my iPhone using Tapatalk

07-11-2019, 01:27 PM	#12
spitfire481 Senior Member Join Date: Mar 2013 Drives: 2JZ FRS Location: Pure Automotive Performance Posts: 1,378 Thanks: 97 Thanked 1,354 Times in 621 Posts Mentioned: 27 Post(s) Tagged: 2 Thread(s)	you doubled, or more the injector size without re-scaling the fuel table. Car is so rich its killing itself. You can't just swap injectors over and not adjust the tune. __________________ Pure Automotive Performance MoTeC Build Thread @spitfire481

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
INSTALLED TURBO, CAR WONT START	Nightflo	Forced Induction	23	06-23-2018 09:26 PM
P0455 EVAP Code after New Direct and Port Injectors Installed? (Vortech Supercharger)	Figo	Forced Induction	8	10-04-2016 01:40 PM
car won't start after clutch installed	aquaman	Issues \| Warranty \| Recalls / TSB	4	07-19-2016 01:29 AM
Cold start issue(tune or injectors?)	86 driver	Software Tuning	0	08-01-2015 02:49 AM
Cold start rattle after header,op,fp installed by a newb	aristo	Engine, Exhaust, Transmission	5	10-28-2014 07:28 AM

07-11-2019, 11:46 AM	#3
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 29,868 Thanks: 28,790 Thanked 31,813 Times in 16,424 Posts Mentioned: 708 Post(s) Tagged: 2 Thread(s)	How did you get the compression ratio to 10:1 - ? Other power mods? humfrz

07-11-2019, 12:41 PM	#9
Lantanafrs2 Senior Member Join Date: Jan 2018 Drives: 2013 frs red Location: South Florida Posts: 3,517 Thanks: 2,520 Thanked 3,088 Times in 1,654 Posts Mentioned: 6 Post(s) Tagged: 1 Thread(s)	Might have been overly rich?

User Name		Remember Me?
Password