Exhaust Cover (for single side exhaust)

[HachiRo]

I know FT-86 Factory sells them and has a couple of pictures, anyone else have their own personal pictures of these?
Really trying to justify spending 60$+ on a cover

[cdo221]

I had one on my old FR-S (passenger side):

[HachiRo]

Originally Posted by cdo221

I had one on my old FR-S (passenger side):

Was the fitment alright? Some people said there's a bit of a gap and it can be bothersome to the eyes.

[cdo221]

Originally Posted by HachiRo

Was the fitment alright? Some people said there's a bit of a gap and it can be bothersome to the eyes.

Actually thought it was fitment was pretty good, but you gotta line it up right. I actually messed up the alignment the first time (you have to drill 3 holes). It was close, but you could tell the gap was a bit weird and wasn't aligned to the curves of the bumper perfectly.

I ended up just removing one of the screws, then adjusting it a bit, and using some 3M VHB double sided tape in place of the 3rd screw, aligned perfect. There's obviously still the small gap that you see in the pic surrounding the piece but it's basically flush and curves exactly as it should with the rear bumper piece. I was perfectly happy with it, showed it to a few of my friends and they said if I didn't point it out, they wouldn't have noticed it.

[HachiRo]

Originally Posted by cdo221

Actually thought it was fitment was pretty good, but you gotta line it up right. I actually messed up the alignment the first time (you have to drill 3 holes). It was close, but you could tell the gap was a bit weird and wasn't aligned to the curves of the bumper perfectly.

I ended up just removing one of the screws, then adjusting it a bit, and using some 3M VHB double sided tape in place of the 3rd screw, aligned perfect. There's obviously still the small gap that you see in the pic surrounding the piece but it's basically flush and curves exactly as it should with the rear bumper piece. I was perfectly happy with it, showed it to a few of my friends and they said if I didn't point it out, they wouldn't have noticed it.

Ah, drilling is required. Hm. Maybe I'll do likewise if I end up getting it and try using a mixture of screws and 3m. Thanks for all the info!
Still open to see more pics from anyone else .

[ZOMFGAARON]

Innovated Dynamics makes them too in carbon / fiber glass.


Sent from my iPhone using Tapatalk

[HachiRo]

Originally Posted by ZOMFGAARON

Innovated Dynamics makes them too in carbon / fiber glass.


Sent from my iPhone using Tapatalk

Anymore price friendly?

[niceguy21]

Originally Posted by HachiRo

Anymore price friendly?

Same price as $65.00, fitment is a tad bit nicer. Have both right and left side covers too.👍

[sosick]

Bought mine from innovated dynamics

Came with free carbon fiber plaque, which looks bad ass


Fitment is great no issues

[sosick]

Originally Posted by Ammunition

I have the Fujitsubo bumper cover which I ordered through a vendor as it is hand-made to order from Japan; they can make one for either the left or right side, and I've been very happy with it.

I love the perforated metal mesh and the rubber lining - the overall look is very clean, and OEM. Here are a few images I have of mine installed on the car (note - it does require drilling three self-tapping holes into the bumper cut-out to hold it in, and it was about $100 shipped to my door from Japan)

Damn thats nice.