Ecutek boost control help - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

1quickchic · 08-24-2021, 03:47 PM

So after my very old school apexi avcr died, I decided to just wire it into the cpc/evap port and enable boost control but thus far it hasn't responded to any adjustment and still is boosting at spring .4bar. Now I haven't eliminated that the apexi solenoid has shat the bed, but I put in some very basic info and have been slowly adding duty to the tables but still nothing, I have my targets set to 2.42 (1.42)but it hasn't gotten anywhere at all 😞
So searching for some advise on setup on the tables

Thanks

Kodename47 · 08-25-2021, 07:52 PM

Have you looked at the EcuTek help files?

steve99 · 08-25-2021, 10:22 PM

Mac valce \ boist sloenoid might be stuffed , try runnin a line from vent Port on valve ( asduming its a 3 Port , to cabin so you can hear\feel if its venting under boist wgen energized

08-24-2021, 03:47 PM	#1
1quickchic Senior Member Join Date: Jan 2016 Drives: 2013 Panda ft86/FRS Location: Oklahoma, USA Posts: 147 Thanks: 22 Thanked 21 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Ecutek boost control help So after my very old school apexi avcr died, I decided to just wire it into the cpc/evap port and enable boost control but thus far it hasn't responded to any adjustment and still is boosting at spring .4bar. Now I haven't eliminated that the apexi solenoid has shat the bed, but I put in some very basic info and have been slowly adding duty to the tables but still nothing, I have my targets set to 2.42 (1.42)but it hasn't gotten anywhere at all 😞 So searching for some advise on setup on the tables Thanks

08-25-2021, 07:52 PM	#2
Kodename47 Senior Member Join Date: Oct 2012 Drives: UK GT86 Location: UK Posts: 3,040 Thanks: 185 Thanked 1,629 Times in 1,112 Posts Mentioned: 155 Post(s) Tagged: 1 Thread(s)	Have you looked at the EcuTek help files? __________________ .: Stealth 86 :. Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boost Control	snowdog	Forced Induction	10	07-20-2016 09:45 AM
electronic boost control.	Jaden	Forced Induction	10	02-02-2015 11:28 AM
BRZedit and boost. (also wondering BRZedit vs ECUtek with boost)	NickFRS	Software Tuning	43	03-10-2014 04:10 AM
Ecutek boost control with ebcs help.	gdrider77	Software Tuning	11	02-02-2014 09:06 PM
Guys running EcuTek boost control	ATSAaron	Forced Induction	14	09-14-2013 03:08 PM

08-25-2021, 10:22 PM	#3
steve99 Banned Join Date: Dec 2013 Drives: FT86 Location: Australia Posts: 7,998 Thanks: 1,035 Thanked 4,987 Times in 2,981 Posts Mentioned: 598 Post(s) Tagged: 2 Thread(s)	Mac valce \ boist sloenoid might be stuffed , try runnin a line from vent Port on valve ( asduming its a 3 Port , to cabin so you can hear\feel if its venting under boist wgen energized

User Name		Remember Me?
Password