FT-86 SpeedFactory Catted UEL Header - Page 161 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

STV3 · 10-20-2014, 02:52 PM

Little update from quite sometime ago. I was having an issue with getting P0420 with my header and just finally got around to swapping out the stock O2 sensor for a new one, and a few days later the CEL came right back.

Its not a huge deal. I just clear it with my phone every few days. I may try doubling up on the defoulers.

RFB · 10-21-2014, 11:55 AM

Quote:

Originally Posted by RFB

My post is to share my header experience that conflicts with the header install video.
The video says the oil pan was heat wrapped and that it was left in place for the install but was not necessary.

Daily driving showed no problems - HOWEVER -
At the track my oil temps skyrocketed as high as 280 F ! I reached danger zone before one lap !

I think I NEED to wrap the oil pan.

Thoughts ?

CERBERUS

Put gold heat reflective tape on the pan, just sections near the pipes so as not to block heat transfer from the pan outward.

Went tracking on a fast track (hi-speed corners yum !) -

Hottest oil temp was 20 degree's cooler, and it took longer before it maxed out.
Still, 260 is dangerous, and an oil cooler is on the way.
But I will install a proper heat shield, with some insulator material I have.

CERBERUS

Tenchi · 10-21-2014, 10:04 PM

[ame]http://youtu.be/_rZk8KtZLcM[/ame]

Sent from my iPhone using Tapatalk

Re~Mix · 10-22-2014, 02:27 PM

Car threw a CEL last night, code P0420 'Bank 1'. Welcome to the world of modified cars I guess.

Running TRD intake/exhaust and the UEL Catted header. Diagnosing the issue tomorrow and possibly installing a stage 1 tune...

pnig · 10-22-2014, 03:05 PM

I switched to a Tomei 80 catback
Here is the result paired with the FT86 SF header and motiv concepts FP/OP
[ame]http://youtu.be/lvRkBDT6228?t=5s[/ame]

white_knight · 10-25-2014, 08:17 AM

FT-86 SpeedFactory UEL catted headers + Perrin CAI + custom overpipe + custom catted front pipe + Perrin 2.5" resonated CBE.

[ame="https://www.youtube.com/watch?v=RkCbuXcSRRs"]Toyota 86 Aftermarket Exhaust - YouTube[/ame]

Zero torque dip. Will post up dyno soon.

drewbot · 10-25-2014, 12:00 PM

Quote:

Originally Posted by RFB

Put gold heat reflective tape on the pan, just sections near the pipes so as not to block heat transfer from the pan outward.

Went tracking on a fast track (hi-speed corners yum !) -

Hottest oil temp was 20 degree's cooler, and it took longer before it maxed out.
Still, 260 is dangerous, and an oil cooler is on the way.
But I will install a proper heat shield, with some insulator material I have.

CERBERUS

I find it hard to believe that no one has commented on the track day performance of this yet. Have you thought about coating it?

Sent from my OnePlus One

RFB · 10-25-2014, 10:55 PM

Quote:

Originally Posted by drewbot

I find it hard to believe that no one has commented on the track day performance of this yet. Have you thought about coating it?

Sent from my OnePlus One

Did, but I may have something better, cheaper, simpler, more effective, especially when coupled with oil coolers.

CERBERUS

white_knight · 10-26-2014, 08:40 AM

[/URL]

What torque dip???

Trettiosjuan · 10-26-2014, 09:04 AM

Quote:

Originally Posted by white_knight

[/URL]

What torque dip???

What graph scaling???

nunonuna · 11-04-2014, 10:20 AM

Quote:

Originally Posted by DarkestBuddha

noone is running OFT stage 2 uel?

Im trying oft stg 2 uel tune on mine. Here is my 3rd gear pull.

http://www.datazap.me/u/fa20frs/stg2...zoom=3502-3596

dkstylezz · 11-16-2014, 04:26 AM

Was driving to work and for the first time i get a p0420. had these since april. I have read this entire post and was wondering if there are any updates from other owners with the same problem. Thanks

FT86 UEL Header Catted
Motiv Over / HF Cat
Perrin 2.5 Catback Resonated Exhaust

Trettiosjuan · 11-16-2014, 04:36 AM

Quote:

Originally Posted by dkstylezz

Was driving to work and for the first time i get a p0420. had these since april. I have read this entire post and was wondering if there are any updates from other owners with the same problem. Thanks

FT86 UEL Header Catted
Motiv Over / HF Cat
Perrin 2.5 Catback Resonated Exhaust

Stock ECU/mapping? While only the header without a remap works, full header back exhaust mods easily becomes too much for the stock ECU to accomodate over time. Apparently.

Avo1789 · 11-17-2014, 01:19 AM

Hey guys. Im hoping to do some ecu work to bring out the full capabilities of these headers. The question is: open flash tablet ($500) or custom tune at Evasive (about $800).

By the way, I have had the headers on for two weeks now and they are fantastic! I just hope to squeeze out a bit more performance with either/or soon!

10-22-2014, 02:27 PM	#2244
Re~Mix Senior Member Join Date: May 2012 Drives: 13' Scion FRS MT Location: San Francisco Bay Area Posts: 737 Thanks: 290 Thanked 333 Times in 191 Posts Mentioned: 7 Post(s) Tagged: 3 Thread(s)	Car threw a CEL last night, code P0420 'Bank 1'. Welcome to the world of modified cars I guess. Running TRD intake/exhaust and the UEL Catted header. Diagnosing the issue tomorrow and possibly installing a stage 1 tune... __________________ 07' Z4M Coupe \| KW Clubsports \| AFE Intake \| Stromung Mufflers \| UUC Shortshifter \| Advan RS 15' 228i MSport 13' FR-S \| TRD CAI \| TRD Catback \| UEL Header \| OFT Stg 1 \| Rota Grid-V \| RCE Suspension \| Hankook \|

11-16-2014, 04:26 AM	#2252
dkstylezz Member Join Date: Mar 2013 Drives: 2013 Subaru BRZ Location: Hollywood CA Posts: 86 Thanks: 45 Thanked 44 Times in 23 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	catted uel P0420 today..... Was driving to work and for the first time i get a p0420. had these since april. I have read this entire post and was wondering if there are any updates from other owners with the same problem. Thanks FT86 UEL Header Catted Motiv Over / HF Cat Perrin 2.5 Catback Resonated Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Catless and Catted Front Pipe - FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	107	03-29-2016 10:48 AM
catted header or catted front pipe?	gabeg86	Engine, Exhaust, Transmission	28	10-13-2015 12:32 PM
P&l EL catted and coated header.	wootwoot	Engine, Exhaust, Bolt-Ons	8	10-11-2013 12:50 AM
Catted UEL Header	Cjymiller	Engine, Exhaust, Transmission	20	05-24-2013 12:01 PM
*Invidia Catted and Catless Front Pipes* - FT-86 SpeedFactory RELEASE SALE	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	12	10-24-2012 10:12 PM

10-20-2014, 02:52 PM	#2241
STV3 Señor Member Join Date: May 2013 Drives: 2013 Scion FR-S Location: Rockland County NY Posts: 1,607 Thanks: 1,103 Thanked 1,322 Times in 645 Posts Mentioned: 17 Post(s) Tagged: 4 Thread(s)	Little update from quite sometime ago. I was having an issue with getting P0420 with my header and just finally got around to swapping out the stock O2 sensor for a new one, and a few days later the CEL came right back. Its not a huge deal. I just clear it with my phone every few days. I may try doubling up on the defoulers.

10-21-2014, 10:04 PM	#2243
Tenchi Senior Member Join Date: Feb 2014 Drives: Silver Ignition 6MT 10 series FR-S Location: Rochester NY Posts: 162 Thanks: 95 Thanked 66 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	[ame]http://youtu.be/_rZk8KtZLcM[/ame] Sent from my iPhone using Tapatalk

10-25-2014, 08:17 AM	#2246
white_knight Senior Member Join Date: Jul 2012 Drives: 2013 86 GTS - Pegasus White Location: Sydney, AU Posts: 237 Thanks: 88 Thanked 103 Times in 53 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	FT-86 SpeedFactory UEL catted headers + Perrin CAI + custom overpipe + custom catted front pipe + Perrin 2.5" resonated CBE. [ame="https://www.youtube.com/watch?v=RkCbuXcSRRs"]Toyota 86 Aftermarket Exhaust - YouTube[/ame] Zero torque dip. Will post up dyno soon.

10-26-2014, 08:40 AM	#2249
white_knight Senior Member Join Date: Jul 2012 Drives: 2013 86 GTS - Pegasus White Location: Sydney, AU Posts: 237 Thanks: 88 Thanked 103 Times in 53 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	[/URL] What torque dip???

11-17-2014, 01:19 AM	#2254
Avo1789 Senior Member Join Date: May 2013 Drives: Ultramarine FR-S Location: North Hollywood Posts: 193 Thanks: 20 Thanked 40 Times in 30 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	Hey guys. Im hoping to do some ecu work to bring out the full capabilities of these headers. The question is: open flash tablet ($500) or custom tune at Evasive (about $800). By the way, I have had the headers on for two weeks now and they are fantastic! I just hope to squeeze out a bit more performance with either/or soon!

User Name		Remember Me?
Password