$600 Brake retrofit, Cadillac ATS brembos, STI rotors. - Page 8 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jamal · 03-26-2018, 01:02 PM

The funny thing about the RPF1 is that the 8" wide +35 offset wheel has less brake clearance than the +45 version. It's because on the higher offset version the spokes kind of curve around and back in to the rim surface where they are more concave on the lower offset wheels.

The 18x8 +45 RPF1 I think will fit those brakes but I'm not positive.

poolboy54 · 03-26-2018, 02:49 PM

Quote:

Originally Posted by jamal

The funny thing about the RPF1 is that the 8" wide +35 offset wheel has less brake clearance than the +45 version. It's because on the higher offset version the spokes kind of curve around and back in to the rim surface where they are more concave on the lower offset wheels.

The 18x8 +45 RPF1 I think will fit those brakes but I'm not positive.

That's weird haha. Thanks I'll look into it

Sent from my SM-G955U using Tapatalk

benzz280 · 03-31-2018, 05:29 AM

Looks like there is pad overhang issue from one of the install video on youtube. Any of u experiencing it and if it will pose a problem in the long run particularly safety?

Alltezza · 05-12-2018, 09:31 AM

I been trying to grab those calipers for a while but they're always out of stock. Apparently there are new part numbers now.

https://m.facebook.com/ctsvbrakeswap...98882210394953

https://www.facebook.com/ctsvbrakesw...98882210394953

NEW PART NUMBERS:
Driver Caliper- AC Delco- 172-2777
GM- 84089034
Passenger Caliper- AC Delco- 172-2768
GM- 84089035

OLD PART NUMBERS:
Driver Caliper- AC Delco- 172-2586
GM- 22760030
Passenger Caliper- AC Delco- 172-2587
GM- 22760031

Victorscp · 12-03-2018, 06:10 PM

sorry for the bump but are these different then say these???

https://www.amazon.com/dp/B0010G0HP6

https://www.amazon.com/dp/B000S2OR86

Raven86Project · 12-03-2018, 07:04 PM

Quote:

Originally Posted by Victorscp

sorry for the bump but are these different then say these???

https://www.amazon.com/dp/B0010G0HP6

https://www.amazon.com/dp/B000S2OR86

Yes, those look different. They are probably for a newer model

Trueweltall · 12-04-2018, 08:53 AM

Quote:

Originally Posted by turbocat

Finally installed my ATS Brembos and also changed the rear calipers to WRX 2pot calipers.

I used DBA front rotors for my new bigger Front rotors.
Also used StopTech Street Performance pads all around.

Wheels are Apex Racing ARC-8 17x9 42mm offset.

I used a grinder on both top and bottom of the calipers outer edges. I wanted the most room for wheel barrel clearance.

Calipers are rattle can VHT caliper paint Yellow and Orange with a top coat of Clear.

I misted the Orange onto the Yellow while the paint was still wet to get the darker shade of Yellow.

I plan on doing black painted Brembo logos on the fronts soon.

Next time try out Humbrol Metallic Shade 54, you will not be disappointed.

jflogerzi · 12-13-2018, 01:40 AM

Can someone confirm these are pins and brackets that will work with this kit?

ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit with Clips and Pins
Link

Also what Brake lines are needed? Do i need lines made for these brakes or can I get Steel braided lines made for the FRS/BRZ?

Raven86Project · 12-13-2018, 01:54 AM

Quote:

Originally Posted by jflogerzi

Can someone confirm these are pins and brackets that will work with this kit?

ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit with Clips and Pins
Link

Also what Brake lines are needed? Do i need lines made for these brakes or can I get Steel braided lines made for the FRS/BRZ?

You can find all you need to know here:
[ame]https://www.youtube.com/watch?v=0Ofn9qgdFsU[/ame]

He also links all the products in his video description.

Raven86Project · 12-13-2018, 02:01 AM

BTW, I have them in my car as well

jflogerzi · 12-13-2018, 02:23 AM

Humm Your looking at 700$ with new Front Brake lines and thats without pads... at current prices.

jflogerzi · 12-13-2018, 02:30 AM

Well shit I hate you guys. You are bad examples!! All parts ordered but pads and new brake fluid.

I picked up some EBC yellow. Seems to be a very good street and light track pad for a decent saving on Amazon. I don't plan to change rear calipers but I will do new pads. What would everyone recommend for rear pads to help with the more forward brake basis with this kit? Should I just go with Yellows all around and match same compound?

turbocat · 12-13-2018, 08:37 PM

Quote:

Originally Posted by Trueweltall

Next time try out Humbrol Metallic Shade 54, you will not be disappointed.

Thanks for the tip. Isn’t that metallic gold? I was going for similar to Brembo yellow.

jflogerzi · 12-13-2018, 10:20 PM

Look what came in

Link to that color above that looks really nice

Sent from my ONEPLUS A5010 using Tapatalk

05-12-2018, 09:31 AM	#102
Alltezza Senior Member Join Date: Mar 2014 Drives: WRB Limited BRZ Location: Tennessee Posts: 696 Thanks: 450 Thanked 276 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I been trying to grab those calipers for a while but they're always out of stock. Apparently there are new part numbers now. https://m.facebook.com/ctsvbrakeswap...98882210394953 https://www.facebook.com/ctsvbrakesw...98882210394953 NEW PART NUMBERS: Driver Caliper- AC Delco- 172-2777 GM- 84089034 Passenger Caliper- AC Delco- 172-2768 GM- 84089035 OLD PART NUMBERS: Driver Caliper- AC Delco- 172-2586 GM- 22760030 Passenger Caliper- AC Delco- 172-2587 GM- 22760031 Last edited by Alltezza; 05-12-2018 at 10:47 PM.

12-13-2018, 02:01 AM	#108
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 304 Thanks: 321 Thanked 477 Times in 209 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	BTW, I have them in my car as well __________________ IG: raven86project Build Thread HERE

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STi Brembos, rotors, and brake lines	jwbrocloud	Brakes, Suspension, Chassis	5	01-09-2015 09:55 PM
04 STI Brembos, Hawk pads, 5x100 front rotors	Philly758	Brakes, Suspension, Chassis	7	12-06-2013 07:55 AM
FS: 2004 STi Gold Brembos(5x100) w/Hawk Pads, Rotors, lines!~~MINTTT~~	nemesisdrift	Brakes, Suspension, Chassis	25	11-22-2013 12:25 AM
2005 STI Brembos Powder Coated, Hawk HPS Pads, Stoptech Rotors and Braided Brake Line	Jamifra	Brakes, Suspension, Chassis	10	10-29-2013 10:31 AM
Redline360: Brake Lines, Brake Rotors, Brake Pads for BRZ/FRS	Redline360	Brakes, Suspension, Chassis	12	01-05-2013 10:20 PM

03-26-2018, 01:02 PM	#99
jamal Senior Member Join Date: Nov 2011 Drives: Legacy GT Location: compton Posts: 534 Thanks: 9 Thanked 365 Times in 204 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	The funny thing about the RPF1 is that the 8" wide +35 offset wheel has less brake clearance than the +45 version. It's because on the higher offset version the spokes kind of curve around and back in to the rim surface where they are more concave on the lower offset wheels. The 18x8 +45 RPF1 I think will fit those brakes but I'm not positive.

03-31-2018, 05:29 AM	#101
benzz280 Member Join Date: Jun 2016 Drives: Toyota 86 Location: Indonesia Posts: 37 Thanks: 18 Thanked 7 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Looks like there is pad overhang issue from one of the install video on youtube. Any of u experiencing it and if it will pose a problem in the long run particularly safety?

12-03-2018, 06:10 PM	#103
Victorscp Member Join Date: Oct 2018 Drives: 2018 BRZ premium Location: CA Posts: 99 Thanks: 64 Thanked 40 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	sorry for the bump but are these different then say these??? https://www.amazon.com/dp/B0010G0HP6 https://www.amazon.com/dp/B000S2OR86

User Name		Remember Me?
Password