GrimmSpeed Needs Display Cars! Wicked Big Meet - Stafford Motor Speedway June 8, 2014

[GrimmSpeed]

Roll call!

Who are we gonna see out there? Of course, as usual, we'll be hosting our annual Pre-Meet Free Meat Meet at ECS on Saturday.

We're also looking for a few cars (wrx/sti/brx/frs) to join us at our booth on Sunday, so if you might be interested in some prime parking and GrimmSpeed goodies, post up some details and photos! In exchange for your support you will be compensated with free entry to the show and an agreed upon list of parts. We will make sure you're WELL outfitted for the show!

We will require that you have GrimmSpeed Vinyl (preferably a windshield banner) on the car for the show.

You also MUST be in the show and staged by 8:30am and your car will remain parked until 5pm.

We're looking for tasteful cars with quality parts or purpose built race vehicles. It is highly encouraged that you are already a GrimmSpeed supporter and have some of our parts currently on your car.

[loogs]

ill be there

[Jive Turkey]

i'll be there, look for me in the HPT booth!

[GrimmSpeed]

Hey guys,

We would be honored if we could get a really clean, unique, or even stock BRZ to represent us at WBM! For your time and support we are offering free entry in to the show and a bunch of free parts!

To Apply:

Here's the easy part. To have a shot at being selected, all you've gotta do is post up a few pictures of your car and a mod list. A little bit about yourself never hurts!

Thank you!

Mike

[Lee358]

Originally Posted by GrimmSpeed

Hey guys,

We would be honored if we could get a really clean, unique, or even stock BRZ to represent us at WBM! For your time and support we are offering free entry in to the show and a bunch of free parts!

To Apply:

Here's the easy part. To have a shot at being selected, all you've gotta do is post up a few pictures of your car and a mod list. A little bit about yourself never hurts!

Thank you!

Mike

im so in! ill post up pics and a mod list later tonight!! maybe having every grimmspeed part offered will help me out!


2013 brz limited
Part list-
JDL UEL header

JDL overpipe

JDL catted front pipe

JDL single exit exhaust/or perrin exhaust (havnt decided which one sounds better yet)

Moto-East Ecutek tune

BPS short shifter

Anarchy motive shift knob

JPM coach works shift boot and e break boot

carbon fiber vinyl wrapped dash with all black interior parts.

Enki RPF1 17x9 +45 matte black wrapped in bridgestone potenza RE11s (245/40/17)
Kwv3 coilovers lowerd aprox 1.5 inches (two finger gap)

raceseng camber plates

Grimmspeed strut bar (red)
Grimmspeed hood struts
Grimmspeed Master cylinder brace
Grimmspeed battery tie down (#86)
Grimmspeed Oil cap (#86)
Grimmspeed alternator cover (red)
Grimmspeed sticker (small) located on the back window
Grimmspeed License plate bracket (i dont run a front plate but i own the bracket and will throw it on that day if you want)
Grimmspeed head to header gasket (yes im just throwing in random grimmspeed parts i have now)
^thats 9 grimmspeed parts

Perrin shorty antenna

Yellow overlays over the fog lights

Custom headlights with Demon eyes, matte black paint with color matched (dgm) accents
inside the headlight.

smoked side markers

rally armor mud flaps

custom front splitter

hella super tones

tinted windows 20% around

Will add to this if i can think of more mods might be getting the wheels super tones and shift knob powder coated a crazy color in the next few weeks.

[hamzam]

I am in

About me: I love cars, first and foremost. I am an enthusiast. I take pride in doing my own work and like to help others so they can enjoy their car as much as I do. Work at a bodyshop, so I'm around cars all day, everyday :P Married with 2 kids to a loving, supportive wife.

Pics:








MODS LIST:

Exterior:
Roof painted black
Mirror Caps painted black
Fender Garnish painted black
Trunk painted two tone – Black & Red
5-Axis Rear Spoiler – Two tone - Black & Red
Rear trunk garnish – Emblem shaved, painted to match.
Front emblem – Stock painted black.
Windows Tinted – 20% doors, 5% everywhere else
Offset stripes – Hood + Front Bumper
Raingaurds, Non-OEM
OEM Mudguards
Hella Horns
Rear Diffuser, Non-OEM
FT86SpeedFactory RT-Exhaust Cover
Perrin Shorty Antenna IN TRANSIT !

Interior:
Armrest
GPS – Mounted by factory radio
Subwoofer – Bazooka 10” 200-Watt added to factory unit.
WeatherTech Mats
Dash Panel 3M vinyl wrapped
DiodeDynamics “FR-S” Center Console Plaque, Red/Black

Lighting:
Tail lights – Tinted 3 coats VHT NiteShades + Clear
HELIX Crystal Smoked side-markers
Headlight Blackout, Full Enclosure
6,000k LED bulbs – Rear License Plate, Rear Turn Signal, Side Reflectors, Dome Light
6,000k HID retro kit – 2003 - BMW 745Li Ballast
Diode Dynamics Stage 2 Switchback LED – Front Turn / Fog
OEM 3rd Brake Light Delete
DIY LED Bar 3rd Brake Light
DIY 4th brake light - lower reflector
Winjet Foglamps w/ Gloss Black Bezels, H11 Halogen Bulb (Yellow)

Engine:
Perrin cold-air intake
Borla UEL header
Custom Single-Exit Axle-back Exhaust, Apexi N1 Muffler (w/ Silencer)
Car Chemistry Exhaust Insert, Twin Disc
OpenFlash Stage 2 UEL Tune (v1.58 BETA)
GrimmSpeed Pulley Cover w/ Tool Kit, Red IN TRANSIT !

Transmission/Clutch/Shifter:
Whiteline Transmission Mount Insert
Perrin Rear Shifter Bushing
Red MT90 75w90 GL-4 Transmission Fluid
KartBoy Short-Shifter
MTEC Shifter Springs
MTEC Drift Shift Knob, Red

Suspension/Chassis:
Eibach Pro-Kit Springs
Eiback 25mm Adjustable Front-Sway Bar - Soft/Comfort Setting
Eibach 19mm Adjustable Rear-Sway Bar - Soft/Comfort Setting
Whiteline Camber-Bolt, Front
Whiteline Camber-Kit, Rear, NOT INSTALLED
GrimmSpeed Strut-Tower Brace, Red
GrimmSpeed Hood-Strut Kit

Wheels/Tires/Brakes:
BBS LM, Staggered. 18”x8.5” FR, 18”x9.5” RR
REAR: Achilles 2233 265/35/18
FRONT: Continental ContiProContact 235/40/18

[FRSKEV]

Sorry just realized I'll be in Austin, TX for the XGames.

[Silver Ignition]

I have a clean 10 Series that would LOVE to be outfitted with some Grimmspeed goodies!


Mods list is too short: TRD Exhaust, Perrin Crank Pulley and Tein S-Tech springs


Located right next door on Long Island!

[Ny Brz]

Please visit my build page for more pics...thanks in advance

Rich

[Jayde]

Ohhhhhhhhhhhhhhhhh


But, I have all the Grimmspeed parts so far, that's extra bonus points, right?!! And it's white, like last year! Hell I'll even put on that awesome decal of the trip you guys used last year as well!

But, it's mostly stock, but here's a few pics:




So, all the Grimmspeed goodies, JDM tips, TOMs taillights, 30% all around.

Not expecting to get chosen, but I'd thought I would try.

[DarkCard]

Exhaust: Greddy Sp2, Invidia Front Pipe
Intake: Perrin, Hks Drop in filter
Engine Bay: Password:JDM Strut Bar (3pc), STM Mini Battery, Sti oil cap
Exterior: TOM'S Taillights, Evasive Downforce Lip, Brz wing, Jdm Fog lights with 3000k bulbs, Jdm Marker lamps, 5000k Hids', Custom Rear Fog , Beatsonic Antenna, 20% Window Tint
Suspension: Fortune Auto 500 Series
Wheels & Tires: Rota Torque's 18" Hankook v12's

DSC_0141 by DarkCard_Photo, on Flickr

DSC_0027 by DarkCard_Photo, on Flickr

DSC_0115-Recovered by DarkCard_Photo, on Flickr

[Andrew360]

Hey! I'd love to represent Grimmspeed at WBM. I already have some magnets with your stickers made but I wouldn't mind putting on a windshield banner either. I know some parts I have on my car conflicts with what you guys make so I'll swap out whichever parts will be required to make everything work. I will have the car freshly detailed right before the meet so everything will be top notch.

I'm planning to add Raceseng's 5 piece pulley kit, Winjet headlights and APR radiator cooling plate within the next month and everything will be on by the time WBM rolls around.


2013 Scion Frs in Whiteout

Power Mods:
-TRD Drop In Air Filter
-Perrin Inlet Tube
-Perrin Non-Resonated Catback
-Perrin Front Pipe
-Perrin Overpipe

Suspension & Drivetrain:
-KW V3 Coilovers
-Vorshlag Front Camber Plates
-Cusco Front & Rear Strut Bars
-Cusco Rear Sway Bar
-Perrin Sway Bar End Links
-Cusco Front Member brace
-Cusco Rear Member Brace
-Cusco Rear Control Arms
-Cusco Accelerator Pedal Extension
-TIC Solid Steering Rack Bushings
-AP Racing Front Sprint BBK
-Spiegler SS Brake Lines F&R
-ARP Extended Studs w/ Counterspace Chromoly Steel Lug Nuts
-Grimmspeed Master Cylinder Brace

Wheels & Tires:
17x9 Wedsport TC105N on Hankook Ventus R-S3 (245/40/17) (Just put them on so I don't have photos with them on yet. Old tires were Toyo R1Rs)

Interior & Exterior:
-Status Racing Ring GT-X Seats
-Gutted out interior behind front seats
-Custom weld in Chromoly Roll Bar painted GT3 Rollbar Red
-G-Force 5 Point Harness
-Raceseng Slammer Weighted Shift Knob w/ Reverse Lockout
-Toyota Emblems
-Cusco Rear Tow Hook
-Down Force Carbon Fiber side splitter
-Down Force Carbon Fiber front lip
-Voltex Racing Japan Type 2 Wing

Other:
-Braille 9 pound Lightweight Battery & mount
-PWJDM Engine Dress Up Kit
-Clear Front Side Markers
-Crawford Air Oil Separator
-Rear fog light

[Lee358]

^i lose

[Silver Ignition]

@Andrew360 that is a beautiful piece of machinery.