Philippines

[HRTROB]

Originally Posted by Margovincent_22x

Ako nag drop ng 2". Lahat ng pwedeng sumayad e sumayad na LOLS. plan to return 1" para iwas sayad.

Dumating na rims and uni mo? Pics!! I wanna see how the TE37SL looks like when it's SLAMMED

[NIKDENG]

Originally Posted by HRTROB

Thanks paps! You will not be dissapointed with the Milltek I had my Borla UEL header installed today. Here are a couple of clips

Nice boxer rumble sound but I'm sure the blue Camaro in your garage sounds better.

[Alabang BRZ]

Originally Posted by HRTROB

Negative, it's a Pioneer as posted 2 pages down. And yes I installed the free Pioneer reverse camera.

Could you take a photo of the camera as installed on your car? Did the installer make their own hole with a drill or is there a provision for it on the trunk?

[HRTROB]

Originally Posted by Alabang BRZ

Could you take a photo of the camera as installed on your car? Did the installer make their own hole with a drill or is there a provision for it on the trunk?

I installed the head unit and camera myself. I'm not a fan of drilling as well, so I just used 3M double-sided tape and sticked the camera onto the trunk-release switch. The switch still works, to open the trunk I just have to press on the camera itself, or the sides of the camera with 2 fingers. Check out the video I posted of me driving away, if you pause it you can see where I have the camera mounted. I'll take a photo tomorrow if you want.

[Alabang BRZ]

Originally Posted by HRTROB

I installed the head unit and camera myself. I'm not a fan of drilling as well, so I just used 3M double-sided tape and sticked the camera onto the trunk-release switch. The switch still works, to open the trunk I just have to press on the camera itself, or the sides of the camera with 2 fingers. Check out the video I posted of me driving away, if you pause it you can see where I have the camera mounted. I'll take a photo tomorrow if you want.

So how did you get the video cable to the camera/head unit? Arent you worried that the camera will detach overtime by wear/tear or some bored bystander?

Could you also take a photo of your Pioneer while displaying the video feed from the rear camera?

My apologies on the myriad requests but after being spoiled with the 2014 Forester's reverse camera I'd love to be able to do the same with my BRZ and other cars if possible.

[HRTROB]

Originally Posted by Alabang BRZ

So how did you get the video cable to the camera/head unit? Arent you worried that the camera will detach overtime by wear/tear or some bored bystander?

It won't. I have the camera mounted the same way in my daily-driver Land Cruiser.

If you want peace of mind, by all means go ahead and drill holes in your brand new car

[HRTROB]

Originally Posted by Alabang BRZ

So how did you get the video cable to the camera/head unit? Arent you worried that the camera will detach overtime by wear/tear or some bored bystander?

Could you also take a photo of your Pioneer while displaying the video feed from the rear camera?

My apologies on the myriad requests but after being spoiled with the 2014 Forester's reverse camera I'd love to be able to do the same with my BRZ and other cars if possible.

No problem, I'm glad to help. Here you go..

[dagame]

Originally Posted by Margovincent_22x

Ako nag drop ng 2". Lahat ng pwedeng sumayad e sumayad na LOLS. plan to return 1" para iwas sayad.

how many inches is your gap from the ground to the lowest point of the bumper and from the top of the tire to the wheel arch w/ the 2" drop?

[Alabang BRZ]

Originally Posted by HRTROB

No problem, I'm glad to help. Here you go..

How about th video/power cable from the camera to the stereo?

[HRTROB]

Originally Posted by Alabang BRZ

How about th video/power cable from the camera to the stereo?

It's just sandwiched between the trunk and the trunk handle.

[Alabang BRZ]

Originally Posted by HRTROB

It's just sandwiched between the trunk and the trunk handle.

So you created a wedge between the insulation/rubber seal and snaked the cable through?

[Saxman]

To those who are interested, here's how the Euro plate made by Mark looks like on the 86.

[Margovincent_22x]

Originally Posted by dagame

how many inches is your gap from the ground to the lowest point of the bumper and from the top of the tire to the wheel arch w/ the 2" drop?

not sure pero ung CROCKS ko na sandals almost dikit so ~3" nalang ung height from the ground

[Margovincent_22x]

Originally Posted by HRTROB

Dumating na rims and uni mo? Pics!! I wanna see how the TE37SL looks like when it's SLAMMED

will arrive next week pa hehehehe. natagalan kc madami nakisabay sa shipping..