|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
08-11-2013, 07:32 PM | #1 |
Senior Member
Join Date: Jul 2013
Drives: Rocket Bunny v1 FRS
Location: Warner Robins, Ga
Posts: 287
Thanks: 73
Thanked 100 Times in 60 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
BC BR Extreme Low Coilovers install pics
I installed my BC coilovers today and during the process took quite a few pics of the install. its was pretty straight forward and quite easy due to it being a brand new vehicle so all the nuts/bolts broke free fairly easily! hope you enjoy!
the day I got them. I couldn't tell at first but notice how the box has 10/10 ext, that means they are extreme lows.(I almost though they were reg BRs and almost got ) first impression of the packaging wasn't that great started with the front. this is the main setup w/ the wheel removed. the brake line and abs wires are bolted/mounted to the OEM strut. this is the OEM struts and end links compared to the BCs Be sure to mount the camber plates properly or you wont be able to adjust camber properly the BCs have mounting locations just like the OEM assembly |
08-11-2013, 07:33 PM | #2 |
Senior Member
Join Date: Jul 2013
Drives: Rocket Bunny v1 FRS
Location: Warner Robins, Ga
Posts: 287
Thanks: 73
Thanked 100 Times in 60 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
the rears were a little more difficult but not bad. you have to remove the lining from in the trunk in order to gain access to the upper strut bolts. From underneath I had to remove the endlink bolts, strut bolt, and the bolt that connects the LCA to the hub. after that it was smooth sailing!
pic of the OEM assembly w/ wheel removed and w/ trunk lining removed comparing the OEM rear strut assembly to the BC and the Finished result. this is out of the box no height adjustment. w/ stock wheels and tires I'm very pleased! |
08-11-2013, 08:30 PM | #3 |
Member
Join Date: Jun 2013
Drives: Fr-s 2013 Hot Lava
Location: Puerto Rico
Posts: 88
Thanks: 23
Thanked 13 Times in 10 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Love it looks awsome.
|
The Following User Says Thank You to Charky For This Useful Post: | 86TruenoFRS (08-12-2013) |
08-11-2013, 09:13 PM | #4 |
Senior Member
Join Date: Aug 2013
Drives: 2013 FRS, 2008 R32
Location: Miami, FL
Posts: 1,201
Thanks: 715
Thanked 593 Times in 383 Posts
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
|
Looks great. Where did you buy those, price?
|
The Following 2 Users Say Thank You to mfbmike For This Useful Post: | 86TruenoFRS (08-12-2013), Circuit Motorsports (08-12-2013) |
08-11-2013, 09:43 PM | #5 |
Senior Member
Join Date: Jul 2013
Drives: Rocket Bunny v1 FRS
Location: Warner Robins, Ga
Posts: 287
Thanks: 73
Thanked 100 Times in 60 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I got them from @Circuit Motorsports pm them for price. The include free rear extenders for dampening adjustment.
|
The Following User Says Thank You to 86TruenoFRS For This Useful Post: | Circuit Motorsports (08-12-2013) |
08-11-2013, 09:47 PM | #6 |
Member
Join Date: Jul 2013
Drives: 2013 FRS
Location: Tampa
Posts: 82
Thanks: 34
Thanked 21 Times in 19 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Wow looks great!
|
The Following User Says Thank You to FRS1010 For This Useful Post: | 86TruenoFRS (08-12-2013) |
08-12-2013, 03:19 PM | #7 |
Senior Member
Join Date: Feb 2013
Drives: 2013 FR-S Whiteout MT
Location: Orange County CA
Posts: 535
Thanks: 102
Thanked 79 Times in 67 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Thinking about this set up too! If this is with no height adjustments can you still raise it? How is the ride now compared to stock?
__________________
When in doubt, throttle out!
|
The Following User Says Thank You to FRS Johnny For This Useful Post: | 86TruenoFRS (08-12-2013) |
08-12-2013, 04:15 PM | #8 |
Boosted
Join Date: Feb 2013
Drives: Not a supra....yet
Location: Riverside,CA/ Abu Dhabi,UAE
Posts: 2,925
Thanks: 487
Thanked 1,203 Times in 812 Posts
Mentioned: 90 Post(s)
Tagged: 2 Thread(s)
|
if you want somethings a bit higher "out of the box", but could actually go as lower if not lower. Opt for the normal Bc racing coilovers
__________________
|
The Following User Says Thank You to SmsAlSuwaidi For This Useful Post: | FRS Johnny (08-12-2013) |
08-12-2013, 10:09 PM | #9 |
Senior Member
Join Date: Jul 2013
Drives: Rocket Bunny v1 FRS
Location: Warner Robins, Ga
Posts: 287
Thanks: 73
Thanked 100 Times in 60 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I still have room to go lower and could raise it back to stock height im sure! as far as ride quality, I will let you know for sure when the springs settle and suspension breaks in. as of right now with the 10k springs its a little stiff but I need to adjust dampening a bit and see
|
The Following User Says Thank You to 86TruenoFRS For This Useful Post: | FRS Johnny (08-12-2013) |
08-12-2013, 10:51 PM | #10 |
Corner Junkie
Join Date: Feb 2012
Drives: 13 BRZ, 11 STI, 99 RS
Location: Ohio
Posts: 2,908
Thanks: 129
Thanked 1,520 Times in 702 Posts
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
|
Ok, I'm wondering how this works.. I have just a 20mm drop and I've already ruined one catback. When you go this low do you just plan to write off exhaust systems and other undercarriage bits?
|
08-12-2013, 11:05 PM | #11 |
Senior Member
Join Date: Feb 2013
Drives: 2013 FR-S Whiteout MT
Location: Orange County CA
Posts: 535
Thanks: 102
Thanked 79 Times in 67 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Which catback did you ruin? I have the N1 exhaust, and the pipe sits pretty low, it will probably scrape when I drop. It's kind of a problem haha. Maybe aftermarket hangers will raise it? not sure..
__________________
When in doubt, throttle out!
|
08-12-2013, 11:17 PM | #12 |
Corner Junkie
Join Date: Feb 2012
Drives: 13 BRZ, 11 STI, 99 RS
Location: Ohio
Posts: 2,908
Thanks: 129
Thanked 1,520 Times in 702 Posts
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
|
I had a system from Accelerated Performance. The lowest point was a flange. It caught on a bridge expansion joint and bent both flanges back; at the narrowest point too.
|
08-13-2013, 06:28 AM | #13 |
Senior Member
Join Date: Jul 2013
Drives: Rocket Bunny v1 FRS
Location: Warner Robins, Ga
Posts: 287
Thanks: 73
Thanked 100 Times in 60 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Driving in OH you might!lol (I'm from Cleveland so I know how the roads are) but really you just need to be prepared that you night damage stuff underneath. Down hear the roads are pretty flat and it doesn't snow so they don't have plows and salt to destroy the roads. As of right now I'm on stock exhaust w/ track pipe and have no issues but I will look into it when I go the exhaust route!
|
08-13-2013, 06:46 AM | #14 |
Senior Member
Join Date: Jun 2013
Drives: 2013 FRS
Location: Northeast ohio
Posts: 131
Thanks: 6
Thanked 90 Times in 43 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I drive my car lower than yours around Cleveland everyday you'll be fine. Unless you're completely oblivious to what's up ahead.
Sent from my SGH-T999 using Tapatalk 2 |
The Following User Says Thank You to Slash For This Useful Post: | 86TruenoFRS (08-13-2013) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RS*R SUPER DOWN SPRINGS AND COILOVER AND MORE! | ExtremeAutowerks | Brakes, Suspension, Chassis | 32 | 12-23-2013 02:39 PM |
BC Racing Extreme Drop Coilovers | 636 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 60 | 10-16-2013 11:42 AM |
FT86 Cup exhibition event results, pics, and video | CSG Mike | BRZ Photos, Videos, Wallpapers, Gallery Forum | 2 | 01-08-2013 01:49 PM |
How (NOT) to install coilovers | daytrip00 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 53 | 09-06-2012 02:20 PM |
HKS Exhaust install Pics | gtauto | AUSTRALIA | 23 | 07-23-2012 01:51 AM |