|
Electronics | Audio | NAV | Infotainment Anything related to in-car electronics, navigation, and infotainment. |
|
Thread Tools | Search this Thread |
11-14-2013, 12:49 PM | #15 |
Trust me, I'm the Doctor
Join Date: Nov 2013
Drives: 2019 WRX Limited (WRB)
Location: North East PA
Posts: 2,723
Thanks: 4,304
Thanked 1,251 Times in 781 Posts
Mentioned: 33 Post(s)
Tagged: 1 Thread(s)
|
OP, have you spoken to a reputable local audio installer? He may be able to get your install debugged for a reasonable fee.
I'd recommend my audio guy to you, but that's a bit long of a drive . I try and do what I can on the electrical side with my cars, but since I live in an apartment complex, the room I've got to work on my car is a bit limited in space. So, for the stuff I can't do (or to double check my work when that's going to be exposed anyway), I use my local guy. Ensures the work is done right, at least in my case.
__________________
Subies Of Blessed Memory: '05 Forester, '08 WRX, '13 STi
Daily Driver: 2014 BRZ 6MT Limited ^GT5 Replay Photo Mode^ |
11-14-2013, 12:49 PM | #16 | |
Professional Smartass
Join Date: Jul 2012
Drives: White Out FRS
Location: Houston TX
Posts: 1,126
Thanks: 114
Thanked 610 Times in 308 Posts
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Unless the BRZ is different. |
|
11-14-2013, 12:50 PM | #17 | |
Senior Member
Join Date: Jul 2013
Drives: 2013 Scion FR-S (Raven) MT
Location: Kitchener
Posts: 535
Thanks: 99
Thanked 125 Times in 89 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
So I'll re-wire to tap into reverse light instead I guess... So my next question...I'll be repairing the amp wire (dark green) so what's a good way to test if it is fully functional or not? In other words...How do I know I have successfully repaired the dark green wire back to stock?
__________________
--------------------------------------------------------
My Car Journal: Raven FR-S w/ TRD Flavour Click for my AVIC Z150BH Head Unit DIY Install |
|
11-14-2013, 12:52 PM | #18 |
Senior Member
Join Date: Jul 2013
Drives: 2013 Scion FR-S (Raven) MT
Location: Kitchener
Posts: 535
Thanks: 99
Thanked 125 Times in 89 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
And you tapped into the reverse bulb wire?
__________________
--------------------------------------------------------
My Car Journal: Raven FR-S w/ TRD Flavour Click for my AVIC Z150BH Head Unit DIY Install |
11-14-2013, 12:53 PM | #19 |
Senior Member
Join Date: Jul 2013
Drives: 2013 10 series FRS #944
Location: Seattle, WA
Posts: 1,705
Thanks: 329
Thanked 352 Times in 248 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
|
11-14-2013, 12:54 PM | #20 | |
Senior Member
Join Date: Jul 2013
Drives: 2013 Scion FR-S (Raven) MT
Location: Kitchener
Posts: 535
Thanks: 99
Thanked 125 Times in 89 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
When I go back to the wiring tonight, hopefully I'll try a few things and it'll work. If not - I may take up this suggestion Thanks!
__________________
--------------------------------------------------------
My Car Journal: Raven FR-S w/ TRD Flavour Click for my AVIC Z150BH Head Unit DIY Install |
|
11-14-2013, 01:04 PM | #21 |
Professional Smartass
Join Date: Jul 2012
Drives: White Out FRS
Location: Houston TX
Posts: 1,126
Thanks: 114
Thanked 610 Times in 308 Posts
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
|
I tapped into the reverse harness yes, but that's shit for a trigger wire. You could just tap the fuse on the drivers side.
Just a heads up, that reverse wire is only powerful enough to drive the camera and the reverse lights. It doesn't have enough juice to trigger the head unit (at least in my experience). Nope, I just repinned the stock harness. You honestly don't even need a harness, it's 3 wires. Trigger, RCA in, RCA Ground. |
11-14-2013, 01:28 PM | #22 |
Senior Member
Join Date: Jul 2013
Drives: 2013 10 series FRS #944
Location: Seattle, WA
Posts: 1,705
Thanks: 329
Thanked 352 Times in 248 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Great to know. Look like the following link from David @ AE64 is misleading then. I used his harness.
http://ae64.com/Rear-camera-16p-operation.htm |
11-17-2013, 10:46 PM | #23 | ||
Senior Member
Join Date: Jul 2013
Drives: 2013 Scion FR-S (Raven) MT
Location: Kitchener
Posts: 535
Thanks: 99
Thanked 125 Times in 89 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Quote:
For the AVIC Z150BH, you need the following wires hooked up to make your reverse camera function properly: - Red power wire to dark green 12v Amp wire in the trunk - Black GND wire to a metal bolt (I used one in driver side trunk) - Yellow RCA (on camera) to brown RCA (on HU) labelled "reverse camera in" Here is what tripped me up: - **Red "reverse signal anode input" wire goes to NOTHING - Lengthen the purple/white wire coming from the accessory connector on HU and attach it to the light pink reverse wire (located driver side wheel-well PIN5) DONE
__________________
--------------------------------------------------------
My Car Journal: Raven FR-S w/ TRD Flavour Click for my AVIC Z150BH Head Unit DIY Install |
||
12-06-2013, 06:23 AM | #24 |
Junior Member
Join Date: Jul 2013
Drives: 2013 Subaru BRZ
Location: Toronto
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Thank-you!!
I too have been struggling to figure this out. I found a link showing the pink wire:
http://simplicity.elitecaraudio.org/bfrs49.JPG |
06-21-2015, 10:28 PM | #25 |
Senior Member
Join Date: Oct 2014
Drives: 2015 FRS
Location: Toronto
Posts: 361
Thanks: 14
Thanked 106 Times in 83 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
just put the red to reverse pink, and put the black wire to a ground then connect output to where it is suppose to be in the headunit.
"You have to start the car in reverse in order for the camera to work" THIS DOES NOT APPLY IN ANY CASE |
08-28-2019, 05:19 PM | #26 |
Member
Join Date: Jul 2019
Drives: 2015 Scion FRS Auto
Location: New Jersey
Posts: 45
Thanks: 5
Thanked 12 Times in 10 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
For the connection in the footwell 30 pin connector that is 5 down and a pink wire... do I replace this wire with the new wire that is the "reverse trigger wire" that routes to my headunit? Or I do I "t-tap"/splice into this wire?
|
08-29-2019, 04:38 PM | #27 | |
Senior Member
Join Date: Jul 2014
Drives: 2013 Firestorm FR-S AT
Location: Smokey Mountains
Posts: 404
Thanks: 54
Thanked 261 Times in 138 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
08-30-2019, 10:36 PM | #28 | |
Member
Join Date: Jul 2019
Drives: 2015 Scion FRS Auto
Location: New Jersey
Posts: 45
Thanks: 5
Thanked 12 Times in 10 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
reverse camera wiring | derka-derka | Electronics | Audio | NAV | Infotainment | 14 | 06-16-2015 03:09 AM |
FYI - it's possible to add a reverse camera for $20. | SloS13 | Electronics | Audio | NAV | Infotainment | 25 | 09-09-2013 10:03 PM |
Reverse Camera | FT86_Zero | Scion FR-S / Toyota 86 GT86 General Forum | 26 | 08-05-2012 08:05 PM |
Reverse Camera - install question | Sutty | AUSTRALIA | 1 | 07-28-2012 08:40 AM |
Reverse camera? | dorkymork | BRZ First-Gen (2012+) -- General Topics | 28 | 05-21-2012 10:21 AM |