DIY - Simplified Frs Fog Lights - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

chriscross_tnt · 10-27-2013, 09:23 AM

Installed with h11 harness rav4 stalk and nigel fogs and bezels everything under $200 .

Sent from my HTC6500LVW using Tapatalk

Chillz · 10-28-2013, 11:24 AM

Quote:

Originally Posted by chriscross_tnt

Installed with h11 harness rav4 stalk and nigel fogs and bezels everything under $200 .

Sent from my HTC6500LVW using Tapatalk

How did you wire in the fogs? Did you use the pins pictured above?

FRS10-Ray · 10-28-2013, 11:36 AM

Can I use this same process with the 10 series? Will a BRZ stalk be fine to use?

chriscross_tnt · 10-28-2013, 02:40 PM

Quote:

Originally Posted by Chillz

How did you wire in the fogs? Did you use the pins pictured above?

Nope dont need em. Buy h11 harness cut off the the pins they come with. I stripped and sodered into the actual fog lamp 12v wire. thats the wire that goes into the connector and and onli three comes out the other side for the turn signal. The wire that doesnt come out thats the wire u tap into..

I tapped into it cause i didnt feel like messing around with pins. The other wire i just nut and boltedfor my ground. Its relle simple ill try to take a picture later if i have time. Most time consuming part is sodering.

I used a rav 4 stalk because i didnt want the dead auto function. So now i just have the fog light option.

Sent from my HTC6500LVW using Tapatalk

FRS_Ken · 11-12-2013, 03:48 PM

Quote:

Originally Posted by mit_peid

I was actually thinking about just using the foglight housings to make brake air ducts with. I've seen some carbon fiber ones sell for $309 over at FT86speedfactory, but maybe there's a cheaper alternative that would still look pretty cool. This is totally just for looks as I don't have any overheating problems with my brakes since I don't track my car.

Sorry still kind of O/T - but further to @mit_peid 's post...
Agency Power has some LED/Fog/CF brake ducts for like $600 a pair (

) now too. I have the APR CF brake ducts, not the ducting to the brakes yet - they weren't available when I got the ducts last winter. They sure are pretty though

I just bought switchback bulbs and some smoked overlays from @Bluebatmobile to use the stock indicators. I have the Helix LED smoked ones now, but I find the light output insufficient for daytime and just enough at night - I'll miss the white eyebrow running light accents though

Bluebatmobile · 11-13-2013, 09:04 PM

Quote:

Originally Posted by FRS_Ken

Sorry still kind of O/T - but further to @mit_peid 's post...
Agency Power has some LED/Fog/CF brake ducts for like $600 a pair (

) now too. I have the APR CF brake ducts, not the ducting to the brakes yet - they weren't available when I got the ducts last winter. They sure are pretty though

I just bought switchback bulbs and some smoked overlays from @Bluebatmobile to use the stock indicators. I have the Helix LED smoked ones now, but I find the light output insufficient for daytime and just enough at night - I'll miss the white eyebrow running light accents though

Looking forward to the pics Ken

.

B@t™

Grip Ronin · 11-25-2013, 09:18 AM

so what part of the stalk wiring actually triggers the dash light to come on?

chriscross_tnt · 11-25-2013, 10:57 AM

Quote:

Originally Posted by Grip Ronin

so what part of the stalk wiring actually triggers the dash light to come on?

The bcm the computer sees the stalk .

Sent from my HTC6500LVW using Tapatalk

Grip Ronin · 11-27-2013, 01:59 PM

Quote:

Originally Posted by chriscross_tnt

The bcm the computer sees the stalk .

Sent from my HTC6500LVW using Tapatalk

Hm ok I got the regular button but I still want to activate the dash light

chriscross_tnt · 11-27-2013, 02:40 PM

Quote:

Originally Posted by Grip Ronin

Hm ok I got the regular button but I still want to activate the dash light

I believe you can depending on how you wire it . I went with the stalk so idk exactly how you you wire it to get the dash light illuminate. But theres plenty of write ups how

Sent from my HTC6500LVW using Tapatalk

Albaro08 · 06-04-2014, 11:14 AM

I have a frs monogram series and I want to be able to turn the fog lights on without having to have the headlights on the fog lights are stalk from factory was wondering if there is a thread or does anyone no how too thanks and aprichiate any help

lbroskee · 02-12-2016, 03:49 PM

what pins did you tap into for this on the fog light end? i have an aftermarket harness and wanna clean up the install and get rid of a bunch of wires

Boxer ROAR · 03-21-2016, 02:03 AM

is there a possibility of you explaining how to get the fog light plastic covers off as i am struggling and do not want to break anything, I would highly appreciate it.

Thanks, Sam

Shanahan · 11-16-2017, 09:25 AM

Any chance the pictures on page one could be updated, they no longer load. Much appreciated if you someone has them to repost or original poster could.

11-25-2013, 09:18 AM	#49
Grip Ronin The Mechanic Join Date: Mar 2012 Drives: Civic Turbo,FR-S Location: NJ Posts: 928 Thanks: 130 Thanked 171 Times in 119 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	so what part of the stalk wiring actually triggers the dash light to come on? __________________ IG-Joey_Soul Progress Thread Ported billet 20G

06-04-2014, 11:14 AM	#53
Albaro08 Member Join Date: May 2014 Drives: Frs asphalt Grey Location: Maryland Posts: 82 Thanks: 8 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I was wondering I have a 2014 monogram frs I have a frs monogram series and I want to be able to turn the fog lights on without having to have the headlights on the fog lights are stalk from factory was wondering if there is a thread or does anyone no how too thanks and aprichiate any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PHASTEK HID Headlights, Reverse Lights, Fog Lights (FR-S / BRZ)	PhastekSport	Exterior Parts - Lighting	18	07-09-2014 07:42 PM
FR-S smoked tail lights and reverse lights	jjdrivesajazz	Cosmetic Modification (Interior/Exterior/Lighting)	43	02-21-2013 08:38 PM
FR-S Fog lights	ggpaul	Cosmetic Modification (Interior/Exterior/Lighting)	14	11-24-2012 11:28 PM
FRS HID lights?	easybreazy	Cosmetic Modification (Interior/Exterior/Lighting)	85	08-27-2012 10:21 PM
Fog lights on with parking/running lights possible?	BMWDavid	BRZ First-Gen (2012+) -- General Topics	1	06-16-2012 07:29 PM

10-28-2013, 11:36 AM	#45
FRS10-Ray Junior Member Join Date: Oct 2013 Drives: Stock 10 Series! #1345 Location: Bay Area, CA Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can I use this same process with the 10 series? Will a BRZ stalk be fine to use?

03-21-2016, 02:03 AM	#55
Boxer ROAR Junior Member Join Date: Jan 2016 Drives: Toyota GT86 - 2016 Location: Australia Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	is there a possibility of you explaining how to get the fog light plastic covers off as i am struggling and do not want to break anything, I would highly appreciate it. Thanks, Sam

11-16-2017, 09:25 AM	#56
Shanahan Member Join Date: Jan 2013 Drives: FR-S Location: Chardon OH Posts: 66 Thanks: 16 Thanked 17 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Any chance the pictures on page one could be updated, they no longer load. Much appreciated if you someone has them to repost or original poster could.

User Name		Remember Me?
Password