FR-S OEM spoiler removal -- rough picture guide

[CamryDS]

Hi All,

FYI, anyone taking off the OEM spoiler for the FR-S, there's no plastic tabs. Instead you use a 10mm socket driver and a TT30 Torx driver just in case anyone wanted to know.

NOTE: the two outer torx screws are hard to get to, I dropped one of the screws in the trunk lid's pockets, need to find a way to get it out now.

I finished my OEM removal and installed my TRD spoiler yesterday, what a pain it was to guess the pieces since it's a 3 min walk from my car to my house, going up and down the stairs about 20 times was not what I wanted.

Here are pics:

[chuchutrain]

Originally Posted by CamryDS

Hi All,

FYI, anyone taking off the OEM spoiler for the FR-S, there's no plastic tabs. Instead you use a 10mm socket driver and a TT30 Torx driver just in case anyone wanted to know.

NOTE: the two outer torx screws are hard to get to, I dropped one of the screws in the trunk lid's pockets, need to find a way to get it out now.

I finished my OEM removal and installed my TRD spoiler yesterday, what a pain it was to guess the pieces since it's a 3 min walk from my car to my house, going up and down the stairs about 20 times was not what I wanted.

How long did this take? Was there not double sided tape or adhesive holding it down on top of the bolts? Or was it just the bolts?

[MemphisR]

Magnet? Do you live in an apartment? It is a bitch for me to change my tires cause my tires are on a differs level then my car and I am on the top floor.

[CamryDS]

Originally Posted by MemphisR

Magnet? Do you live in an apartment? It is a bitch for me to change my tires cause my tires are on a differs level then my car and I am on the top floor.

Magnet didn't work drove around and hit a bump. It fell out into my trunk.

As far as how long it took (previous poster). about 2 hours or so to get it out as well as clean up the mess. I scratched up the trunk pretty good due to the way the spoiler was mounted and I had a lot of issues taking it off with fishing string.

It's okay, the new spoiler hides EVERYTHING. So just tape up the holes and good luck!

[chuchutrain]

Given your mention of fishing line, there is adhesive then...?

[CamryDS]

Originally Posted by chuchutrain

Given your mention of fishing line, there is adhesive then...?

Dood so sorry, yes its 3m tape + drill, but I ripped off the drill part without damaging the spoiler surface.

Sent from my SM-N900P
Excuse the typos
(╯°□°)╯︵ ┻━┻