|
Forced Induction Turbo, Supercharger, Methanol, Nitrous |
|
Thread Tools | Search this Thread |
01-10-2015, 12:49 PM | #1 |
Senior Member
Join Date: Apr 2014
Drives: series.blurrr
Location: va
Posts: 164
Thanks: 14
Thanked 18 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
VVT Problems: 100$ reward for a solution!! Exhaust targets all 0, intakes no response
SOLVED!!!
Shoutout to a local car guru friend for figuring it out. Solution: It was actually a combination of several things. weirdly enough the stock evap solenoid below the intake (the one you disconnect) was stuck open allowing air to be drawn in acting like a leak, yet when we pressure tested it nothing could be heard. the low pressure caused the high idle but the pressure I guess was compensated for in the tune but also caused vvt lockout on initialization. 2 hours of pressure testing, capping off the intake with a hockey puck, and line rerouting, 5 reflashes later and sucess!!! Hopefully if anyone else ever has this issue this'll help! Background: -JDL turbo kit on 2015 manual -First flash all VVTs worked, second one they didnt, went back to first flash and now they still dont work. All the meanwhile the rpm's are all over the place between 1500-3k when I push the clutch in after cruising. Symptoms: -Intake CAM Targets: exactly as expected -Intake CAM Positions: all hover right around 0 plus or minus 1 degree, no changes regardless of throttle. -Exhaust CAM Targets: all 0, regardless of throttle change -Exhaust CAM Positions: all exactly 0 -no CEL's -no identifiable boost leak What we've tried: First flash; all VVT's worked Second flash; VVT's stopped working and acted as described above Flashed back to first map; VVT's still not working Flashed it, idled for 5 minutes, drove for 5 minutes, reflashed it, idled for 5 minutes, then drove and datalogged, still nothing. What Ive checked: -All vvt plugs are connected (confirmed several times) -oil pressure is good -Solenoids get 12v -Solenoid ground signal wires are connected to the ecm (confirmed by -voltmeter) Last edited by bren5279; 01-10-2015 at 06:42 PM. |
The Following User Says Thank You to bren5279 For This Useful Post: | rixter145 (05-18-2021) |
01-10-2015, 12:59 PM | #2 |
Senior Member
Join Date: Oct 2012
Drives: UK GT86
Location: UK
Posts: 3,040
Thanks: 185
Thanked 1,629 Times in 1,112 Posts
Mentioned: 155 Post(s)
Tagged: 1 Thread(s)
|
See here: http://www.ft86club.com/forums/showp...7&postcount=10
Can't account for the RPM fluctuating. Not an SD based issue either?
__________________
.: Stealth 86 :.
Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook |
01-10-2015, 01:20 PM | #3 | |
Senior Member
Join Date: Dec 2012
Drives: Scion FRS 10 Series AVO Turbo
Location: Coachella Valley / Riverside
Posts: 426
Thanks: 303
Thanked 297 Times in 149 Posts
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Hopefully you don't have this issue. http://www.ft86club.com/forums/showp...postcount=2970 The Cam Sproket on the exhaust will pop out and will lose oil pressure causing exhaust cam not to work properly.
__________________
AVO STG1 Turbo w/ 8PSI Actuator, AVO 3" Catless Turbo Back Exhaust, AVO Air Filter, ACT 6 Puck Clutch, DW65c Fuel Pump, 900cc DW Injectors, Grimmspeed EBC, Delicious Tuning Custom Tune, 0W-20 Purol, AEM Strutbar, GrimmSpeed Hood Struts, Mann Engineering Coilovers, RacerX UCA, Gram Lights 57Xtreme, 275/35/18 BfGoodrich G-Sport Comp2 Tires, MV Designz Aero Kit, Beatsonic Shark Fin & Roof Spoiler, Five Axis Trunk Spoiler, OEMAudioPlus Reference 400
|
|
01-10-2015, 01:21 PM | #4 |
Senior Member
Join Date: Dec 2012
Drives: Scion FRS 10 Series AVO Turbo
Location: Coachella Valley / Riverside
Posts: 426
Thanks: 303
Thanked 297 Times in 149 Posts
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
|
Also because you haven't been driving the car no codes have popped up .
__________________
AVO STG1 Turbo w/ 8PSI Actuator, AVO 3" Catless Turbo Back Exhaust, AVO Air Filter, ACT 6 Puck Clutch, DW65c Fuel Pump, 900cc DW Injectors, Grimmspeed EBC, Delicious Tuning Custom Tune, 0W-20 Purol, AEM Strutbar, GrimmSpeed Hood Struts, Mann Engineering Coilovers, RacerX UCA, Gram Lights 57Xtreme, 275/35/18 BfGoodrich G-Sport Comp2 Tires, MV Designz Aero Kit, Beatsonic Shark Fin & Roof Spoiler, Five Axis Trunk Spoiler, OEMAudioPlus Reference 400
|
01-10-2015, 01:48 PM | #5 | |
Senior Member
Join Date: Apr 2014
Drives: series.blurrr
Location: va
Posts: 164
Thanks: 14
Thanked 18 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Nope, the car doesnt stall out at all, the only thing it does is when cruising then pushing in the clutch and coming to a stop, it rpm hunts between 1500-3000
Quote:
we did have a low pressure code and a high idle code but it was due to the map, he changed it and we reflashed it and they went away. |
|
01-10-2015, 02:10 PM | #6 |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Solve your high idle issue.
the vvt may not become active after an ecu flash/reset untill the car idles at normal speed ie about 750 and speed is zero. I don't think you need to reflash it just turn it off then start let idle while speed is zero, but idle probably needs to be normal. As you have no codes its possibly a mechanical problem like air leak or exhaust leak near 02 sensors Check their is no crap lodged in throttle plate and its closing completely. check the hoses on intake manifold. |
01-10-2015, 02:17 PM | #7 |
Senior Member
Join Date: Apr 2014
Drives: series.blurrr
Location: va
Posts: 164
Thanks: 14
Thanked 18 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Yeah that could possibly be, the idle is almost exactly 1400. Only thing is, when datalogging the start, the vvts dont change at all even on the startup.
|
01-10-2015, 02:32 PM | #8 |
Junior
Join Date: Aug 2013
Drives: a car
Location: Probably at school
Posts: 4,341
Thanks: 3,184
Thanked 2,512 Times in 1,502 Posts
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
|
And my vote goes to cam sprocket!
__________________
"Ah! What music! They could have never imagined, those pioneers who invented the automobile, that it would posses us like this, our imaginations, our dreams. Men love women, but even more than that, men love CARS!"-Lord Hesketh
|
01-10-2015, 05:40 PM | #9 |
Boosted Member
Join Date: Dec 2013
Drives: 2013 Subaru BRZ
Location: Maryland, USA
Posts: 699
Thanks: 455
Thanked 464 Times in 246 Posts
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
|
If the TARGET is zero.. that would be the tune, no?
Software/tuning side of things is certainly not my strong point so chances are that I am wrong.. just saying.
__________________
2013 Subaru BRZ LTD 6MT DGM
2014 Subaru XV Crosstrek Hybrid TRG PG 2011 Honda CBR1000RR 2010 Subaru Impreza WRX PRM SSM |
01-11-2015, 04:45 AM | #10 |
Senior Member
Join Date: Jul 2012
Drives: 2013 Black FR-S
Location: SF
Posts: 3,030
Thanks: 881
Thanked 2,014 Times in 990 Posts
Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
|
How could that be a leak? If the solenoid was stuck open it would just allow the evap line to the fuel tank to be open. But the fuel tank is a closed system no?
How did you fix the stuck open solenoid?
__________________
|
03-14-2017, 04:41 AM | #11 |
Junior Member
Join Date: Mar 2016
Drives: Toyota 86
Location: Qld, Australia
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
So what fixed it exactly? I'm trying to sort this out on mine right now
|
03-14-2017, 05:36 AM | #12 |
Geezer
Join Date: Feb 2016
Drives: 2016 Subaru BRZ Sport Tech
Location: Ontario Canada
Posts: 276
Thanks: 133
Thanked 190 Times in 111 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
More importantly, did you pay the guru the hundred bucks?
|
03-14-2017, 07:34 AM | #13 |
Senior Member
Join Date: Jun 2014
Drives: frs
Location: Gunsai
Posts: 4,877
Thanks: 7,153
Thanked 2,922 Times in 1,769 Posts
Mentioned: 23 Post(s)
Tagged: 2 Thread(s)
|
Who won the prize?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help!! Car Wont Start After Clutch Swap (25$ reward for solution!!) | bren5279 | Issues | Warranty | Recalls / TSB | 44 | 07-03-2017 08:36 AM |
Cruise control wont set after clutch install? ($$ reward for solution!) | bren5279 | Issues | Warranty | Recalls / TSB | 18 | 12-05-2014 10:21 AM |
EVO 3 exhaust-solution to 3-5k super drone | fastseattlegt86 | Engine, Exhaust, Transmission | 1 | 10-19-2014 05:03 PM |
An alternate solution to Drone problems | 86-tundra | Engine, Exhaust, Transmission | 1 | 09-26-2013 02:50 AM |
My Exhaust solution for the moment | Scooby South | Engine, Exhaust, Transmission | 42 | 06-18-2012 07:26 PM |